• The Journal of the Acoustical Society of Korea
• /
• v.19 no.4
• /
• pp.107-114
• /
• 2000

This work is aimed to develop a new type of the Push-Pull ultrasonic transducer that can provide higher sound pressure level and simpler internal structure than conventional types. The driving part of the newly designed transducer is positioned in the middle of the cylinder, and its optimum geometry is determined by using the FEM package, ANSYS. Through FEM model analysis, the effects of all of its geometrical variables such as transducer length, transducer radius, and the edge shape of the end cap have been examined, and the results have led to the optimum geometry. The newly designed transducer has been found to give better performance than that of traditional ones.

• Wind and Structures
• /
• v.31 no.3
• /
• pp.185-196
• /
• 2020

A method to reduce the wind pressure at the leading edge of a noise barrier was investigated by gradually lowering the height of a member added to the end of the noise barrier. The shape of the lowered height of the added member was defined by its length and slope, and the optimal variable was determined in wind tunnel testing via the boundary-layer wind profile. The goal of the optimal shape was to reduce the wind pressure at the leading edge of the noise barrier to the level suggested in the Eurocode and to maintain the base-bending moment of the added member at the same level as the noise-barrier section. Using parametric wind tunnel investigation, an added member with a slope of 1:2 that protruded 1.2 times the height of the noise barrier was proposed. This added member is expected to simplify, or at least minimize, the types of column members required to equidistantly support both added members and noise barriers, which should thereby improve the safety and construction convenience of noise-barrier structures.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.3
• /
• pp.646-655
• /
• 1990

A practically useful system for elastic-plastic fracture mechanics analysis has been developed. The developed system is comprised of the deformation plasticity failure assessment diagram(DPFAD) approach and the J-integral/Tearing modulus(J/T) approach. The system contains analysis routines for five types of fracture specimens : compact tension, center cracked tension, single edge craked plate in uniform tension, single edge cracked plate in three point bending and double edge cracked plate in tension. A double interpolation scheme was adopted to interpolate J values from the EPRI developed EPFM handbook and the Newton-Raphson method was used to obtain proper loadings for displacement control conditions. A graphic output system was utilized to present numerical results. Several case studies were performed to evaluate the accuracy and the usefulness of the code. It was found that the J/T approach and the DPFAD approach yielded similar results. However, the DPFAD approach is more convenient for qick assessment of integrity of cracked structures while the J/T approach is more useful in evaluating the full history of the fracture process.

• Structural Engineering and Mechanics
• /
• v.66 no.1
• /
• pp.125-138
• /
• 2018

This paper proposes a transfer matrix method for the bending vibration of two types of tapered beams subjected to axial force, and it is applied to analyze tapered beams with an edge or multiple edge open cracks. One beam type is assumed to be reduced linearly in the cross-section height along the beam length. The other type is a tapered beam in which the cross-section height and width with the same taper ratio is linearly reduced simultaneously. Each crack is modeled as two sub-elements connected by a rotational spring, and the method can evaluate the effect of cracking on the desired number of eigenfrequencies using a minimum number of subdivisions. Among the power series available for the solutions, the roots of the differential equation are computed using the Frobenius method. The computed results confirm the accuracy of the method and are compared with previously reported results. The effectiveness of the proposed methods is demonstrated by examining specific examples, and the effects of cracking and axial loading are carefully examined by a comparison of the single and double tapered beam results.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.11 no.2
• /
• pp.33-42
• /
• 2003

In this paper, we propose an enhancement of the ultrasonic image for non-destructive inspection of aircraft composite materials. The ultrasonic images are corrupted by a speckle noise which has the characteristic of granular pattern noise and is in all types of coherent imaging systems, the signal independent and multiplicative noise. In this paper, we derive a filter, called the AWLF(Adaptive Window Log Filter), from the nature of the speckle. The filter is made of the MEAN Filter in the edge region and Log Filter in the flat or noise region. To make a distinction between edge and flat region, we calculate the inclination around the local window instead of computing the local statistics of pixels such as local mean ${\bar{M}}$ and standard deviation ${\sigma}_s$. According to the obtained region, edge region is performed by the mean filter and flat region by the Log filter. Performance of the proposed filter is evaluated by the Enhanced Factor$(F_e)$ and the Speckle Index(SI).

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.193-196
• /
• 2010

In this paper, we propose a method to classify the types of vehicle as full, medium, or small size. The proposed method is composed of three steps. First, after obtaining vehicle contour from template candidate image, edge distance template is created by distance transform of the vehicle's contour. Second, the vehicle type of input image is classified as the type of template which has minimal edge distance with input image. The edge distance value means the measurement of distance between input image and template at each pixel which is part of vehicle contour. Experimental results demonstrate that our method presented a good performance of 80% about test images.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.6
• /
• pp.786-792
• /
• 2010

This paper presents a real-time lane detection method which can accurately find the lane-mark boundaries in complex road environment. Unlike many existing methods that pay much attention on the post-processing stage to fit lane-mark position among a great deal of outliers, the proposed method aims at removing those outliers as much as possible at feature extraction stage, so that the searching space at post-processing stage can be greatly reduced. To achieve this goal, a grid-based morphology operation is firstly used to generate the regions of interest (ROI) dynamically, in which a directional edge-linking algorithm with directional edge-gap closing is proposed to link edge-pixels into edge-links which lie in the valid directions, these directional edge-links are then grouped into pairs by checking the valid lane-mark width at certain height of the image. Finally, lane-mark colors are checked inside edge-link pairs in the YUV color space, and lane-mark types are estimated employing a Bayesian probability model. Experimental results show that the proposed method is effective in identifying lane-mark edges among heavy clutter edges in complex road environment, and the whole algorithm can achieve an accuracy rate around 92% at an average speed of 10ms/frame at the image size of $320{\times}240$.

• Journal of the Korean Ceramic Society
• /
• v.24 no.5
• /
• pp.461-469
• /
• 1987

Single crystals of Mn-Zn Ferrite were grown by slow cooling method using Na2B4O7 as flux agent. The effects of flux content and cooling rate on the types of crystals, and the relation between supersaturation and growth mechanism were studied. As a result, the types of grown crystals occurred as plate, hopper and octahedral crystals. The occurrence of these crystal types was dependent on flux content. The habit was found to correlate with the growth rate and supersaturation. The lateral growth of a dendritic crystal is related to the twin layer. The growth of crystals from borax melts mainly occurred by the layer-spreading growth following corner and edge nucleation caused by high supersaturation in the melt. Especially, the plate crystals were produced on top of the melts. The hopper and octahedral crystals occurred at lower supersaturation than the plate crystals.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.05a
• /
• pp.35-38
• /
• 2002

Real defects in composite structures were detected by using laser measuring system. Four types of specimens, that is, a composite laminate, a honeycomb structure, a free-edge delamination and an adhesive joint, were used to study the applicability of ESPI and Shearography to composite structures. Thermal loading method, which can easily induce the surface deformation of specimen, was used to detect defects. Experimental results show that defects in composite structures can be easily detected by ESPI and Shearography. Moreover, it shows that ESPI and Shearography can be usefully applied to the detection of defects in various kinds of composite structures.

• The Journal of the Korean dental association
• /
• v.22 no.10 s.185
• /
• pp.869-877
• /
• 1984

An objective examination of 123 subjects aged from 19 to 23 was made from a clinical standpoints to determine the natural occurrence in anterior tooth contact in centric occlusion, and tooth contact in protrusive occlusion, left and right lateral excursions, and temporomandibular dysfunction. 1. In centric occlusion, maxillary 6 anterior contact type was frequently observe (30.08%) compared with other types of contact (incisor contact: 19.47%, no contact: 17.70%, canine and incisor contact: 15.04%, canines contact: 12.39%, unilateral canine contact: 5.31%) (P<0.01) 2. In protrusive position (edge to edge bite), maxillary central incisors contact was predominant (86.7%). (P<0.01) 3. In lateral excursion, there was not any significant difference between canine guided occlusion (47.79%) and group function occlusion (total 51.32%, AG:9.29%, PG:13.27%, G:28.76%). 4. Temporomandibular joint dysfunction was observed in 12.4% of 123 subjects.