• Journal of environmental and Sanitary engineering
• /
• v.5 no.1
• /
• pp.1.1-14
• /
• 1990

This study was conducted to investigate the contents of heavy metals in soils of the Kumho river basin, by analyzing soils according to the distance from edge of the river and to the soil layers. The contents of heavy metals in soils showed highly in its downstream. Namely there was shown a remarkably high contents of these heavy metals in the Kum-ho bridge areas where Kongdan stream joins Dalseo stream, such as 39.52ppm for zinc, 35.92ppm for copper, 97.90ppm for iron, 102.45ppm for manganese, 13.92ppm for lead, respectively, and 0.48ppm for cadmium. However, the heavy metals contents in soils around Kangchang bridge tended to gradually decrease in its contents, probably because its main soils consisting of sand. Based on their soil layers, the average contents of these heavy metals in the surface soils were higher than one of the subsurface soil. Its contents according to the distance from the river edge indicated some difference every individual area. Nevertheless, its contents showed lower contents in the area far away from the edge. And its contents tended to again increase in the outside bank. In addition, a remarkable positive correlation is shorten between individual heavy metals, except correlation between iron and lead. Also cadmium just shows reverses correlation in the statistics. With respect to comparison between soil layers, there was a remarkable positive correlation between surface layers and subsurface layers. Considering the above results, it seems that the pollution of river bed's soil is in proportion to it of stream.

• The Korean Journal of Mycology
• /
• v.30 no.2
• /
• pp.95-98
• /
• 2002

This study was carried out to evaluate annual growth of fairy ring of Tricholoma matsutake. The edge growth of active mycelial zone of fairy ring during $1999{\sim}2000$ and the distance between sporocarp-fruiting positions of four years ($1997{\sim}2000$) and the edge of fairy ring of 2000 were measured. The fairy ring of T. matsutake moved outward about 11.3 cm annually ($1999{\sim}2000$) in the 65 years old P. densiflora stand, and the growth was coincided with the average distance of sporocarp-fruiting positions for four years ($1997{\sim}2000$). In addition, the sporocarp-fruiting positions were about 13.8 cm apart from the edge of active mycelial zone in year of 2000. Therefore, the sporocarp-fruiting position in this year was within the mycelial region one year ago. It is strongly recommended that the sporocarp of T. matsutake should be harvested apart about 50 cm from sporocarp in order to protect the fairy ring.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.1
• /
• pp.32-41
• /
• 2006

In this study, the thrust generation by simultaneous flapping airfoils in tandem configuration is parametrically studied with respect to flapping frequency, amplitude and relative location. Navier-Stokes solver with overset grid topology is employed to calculate the unsteady flowfields. The computation results indicate that when the two airfoils stroke in-phase - flapping phase lag is zero - the maximum propulsive efficiency and thrust can be obtained for most frequency and amplitude range. At a flapping amplitude of 0.2 chord and a reduced frequency of 0.75, the propulsive efficiency of aft airfoil is enhanced by about 37 % compared with that of forward airfoil. However, if flapping frequency exceeds some critical value, the strength of the leading edge vortex of aft airfoil is fortified by the trailing edge vortex of the forward airfoil, resulting in poor propulsive efficiency. It is also found that out-of-phase flapping has relatively low propulsive efficiency and thrust since vortical wake of the forward airfoil interacts with the leading edge vortex of aft airfoil in the unfavorable fashion. The total thrust and propulsive efficiency are shown to decrease with the horizontal miss distance of the aft airfoil. On the contrary, the vertical miss distance has little effect on the overall aerodynamic performance.

• Journal of the Korean Society of Radiology
• /
• v.17 no.4
• /
• pp.523-529
• /
• 2023

In order to achieve excellent spatial resolution, very small scintillation pixels are used in detectors of positron emission tomography for small animals. However, by using these very small scintillation pixels, scintillation pixels at the edge of the array may overlap in a flood image. To solve this problem, a light guide capable of changing the distribution of light was used. Depending on the material of the light guide, the light spreading tendency is different, and accordingly, the presence or absence of overlapping is different depending on the material of the light guide used. In this study, instead of the conventional glass light guide, a detector using the same material as the scintillation pixel was designed. A scintillator light guide has a higher refractive index than a glass light guide, so the light spread is different. Flood images were acquired to evaluate the degree of separation of the scintillation pixels at the edge of the detector using the two light guides. The degree of separation was evaluated by calculating the distance between the center and the spatial resolution of the image of two scintillation pixels at the edge of the obtained flood image. As a result, when the scintillator light guide was used, better spatial resolution was shown, and the distance between centers of scintillation pixels was wider. When a detector is constructed using a scintillator light guide instead of a conventional glass light guide, it is possible to use a smaller scintillation pixel, thereby securing better spatial resolution.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.6
• /
• pp.1175-1184
• /
• 2015

A depth map is an image which contains 3D distance information. Generally, it is difficult to acquire a high resolution (HD), noise-removed, good quality depth map directly from the camera. Therefore, many researches have been focused on acquisition of the high resolution and the good quality depth map by up-sampling and pre/post image processing of the low resolution depth map. However, many researches are lack of effective up-sampling for the edge region which has huge impact on image perceptual-quality. In this paper, we propose an up-sampling method, based on joint bilateral filter, which improves up-sampling of the edge region and visual quality of synthetic images by adopting different weights for the edge parts that is sensitive to human perception characteristics. The proposed method has gains in terms of PSNR and subjective video quality compared to previous researches.

• Korean Journal of Applied Biomechanics
• /
• v.30 no.1
• /
• pp.17-25
• /
• 2020

Objective: The purpose of this study is to provide a better understanding of long turn mechanism by describing long turns after kinematic analysis and provide skiers and winter sports instructors with data through which they are able to analyze right postures for turns in skiing in a systematic, rational and scientific manner. Method: For this, a mean difference of kinematic variables (the center of gravity (CG) displacement of distance, trajectory, velocity, angle) was verified against a total of 12 skiers (skilled and unskilled, 6 persons each), regarding motions from the up-start to down-end points for long turns. Results: First, concerning the horizontal displacement of CG during a turn in skiing, skilled skiers were positioned on the right side at the upstart and edge-change points at a long turn. There was no difference in anteroposterior and vertical displacements. Second, in terms of CG-trajectory differences, skilled skiers revealed a significant difference during a long turn. Third, regarding skiing velocity, skilled skiers were fast at the edge-change and maximum inclination points in long turns. Fourth, there was no difference in a hip joint in terms of a lower limb joint angle. In a knee joint, a large angle was found at the up-start point among skilled skiers when they made a long turn. Conclusion: In overall, when skilled and unskilled skiers were compared, to make a good turn, it is required to turn according to the radius of turn by reducing weight, concerning the CG displacement. Regarding the CG-trajectory differences, the edge angle should be adjusted via proper inclination angulation. In addition, a skier should be more leaned toward the inside of a turn when they make a long turn. In terms of skiing velocity, it is needed to reduce friction on snow through the edging and pivoting of the radius or turn according to curvature and controlling ski pressure. Regarding a lower limb joint angle, it is important to make an up move by increasing ankle and knee angles instead of keeping the upper body straight during an up motion.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.12
• /
• pp.55-62
• /
• 1998

Matching two images is an essential step for many computer vision applications. A new approach to the scale and rotation invariant scene matching, using linear features, is presented. Scene or model images are described by a set of linear features approximating edge information, which can be obtained by the conventional edge detection, thinning, and piecewise linear approximation. A set of candidate parameters are hypothesized by mapping the angular difference and a new distance measure to the Hough space and by detecting maximally consistent points. These hypotheses are verified by a fast linear feature matching algorithm composed of a single-step relaxation and a Hough technique. The proposed method is shown to be much faster than the conventional one where the relaxation process is repeated until convergence, while providing matching performance robust to the random alteration of the linear features, without a priori information on the geometrical transformation parameters.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.36 no.1
• /
• pp.62-69
• /
• 2008

This study was conducted in order to recommend forest-based wildlife protection areas in Chung-nam Province using several basic habitat conditions. The conditions used in this study were the forest patch size with the potential to keep wildlife animals safe, the distance from water sources, and the availability of food for wildlife. The fractal dimension index was also used to find the edge line dynamics, which can influence on habitat conditions for edge species. The natural conservation management indices including a forest map (indicating the level of forest age), a slope map, and an elevation map were used to find the forest patches with enough space for wildlife to live on. Water resources and their buffer areas were considered as factors to protect the space as an ecological corridor. Deciduous trees and trees mixed with deciduous trees and conifers were chosen to provide wildlife animals their food. In total, 525 forest patches were chosen and recommended for the wildlife protection area. Five of these forest patches were recommended as wildlife protection areas managed by the provincial government. The other 520 forest patches were recommended to protect local wildlife animals and be managed by each county or city. These forest patches were located around the Geum-buk and Geum-nam mountains, and the forest patches are important resources as habitats to keep wildlife in the area. An ecological network consists of these separate forest patches with the ecological integration. A fractal dimension index was used to divide forest patches into several categories in order to find how patches are shaped. The forest patches with longer edges or more irregular shapes have a much higher possibility of being inhabited by various types of edge species. Through comparison of the wildlife protection areas recommended in this study to the current wildlife protection areas, we recognized that the current wildlife protection areas need boundary adjustments in order for wildlife animals to survive by themselves with water sources and food.

• Journal of Environmental Impact Assessment
• /
• v.20 no.2
• /
• pp.151-162
• /
• 2011

The purpose of this study is suggest to restoration model of Pinus thunbergii in Saha-gu, Busan Metropolitan City. The result of this study is summarized as follows; As the results of this study, vegetation restoration model is presented by separating community planting and edge planting. The community planting species of tree layer were Pinus thunbergii and Quercus acutissima and Quercus dentata and Quercus serrata and Quercus alienna and Quercus variabilis. The community planting species of subtree layer were Platycarya strobilacea and Prunus sargentii and Styrax japonica and Eurya japonica and Morus bombycis. The community planting species of shrub layer are Ulmus pavifolia and Ulmus davidiana and Lindera obtusiloba and Elaeagnus macrophylla and Mallotus japonicus and Ligustrum obtusifolium and Sorbus alnifolia and Rhus trichocarpa and Zanthoxylum schinifolium and Rosa wichuraiana and Rhus chinensis and Viburnum erosum and Rhododendron mucronulatum and Rhododendron yedoense and Indigofera pseudotinctoria. And the planting species of edge vegetation are Japanese Angelica and Symplocos chinensis and Pittosporum tobira and Lespedeza maximowiczii and Lespedeza bicolor and Rubus coreanus and Rubus idaeus and Vitis thunbergii and Ampelopsis brevipedunculata and Rosa multiflora. Considering the population of individuals up to layers in each $400m^2$ area, it was composed of 24 in tree layer, 35 in subtree layer, 410 in shrub layer and 34% herb layer in the Pinus thunbergii community. And the average of breast-high area and canopy area was $10,852cm^2$ in tree layer, in subtree layer $1,546cm^2$, in shrub layer $1,158,660cm^2$. The shortest distance between trees was calculated as 2.0m in tree layer, 1.9m in subtree layer.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.13 no.2
• /
• pp.80-94
• /
• 2010

The purpose of this study is suggest to restoration model of Pinus thunbergii in Saha-gu, Busan. The result of this study is summarized as follows. As the results of this study, vegetation restoration model is presented by separating community planting and edge planting. In community planting, as a group of canopy, there are 6 species; Pinus thunbergii, Quercus acutissima, Quercus dentata, Quercus serrata, Quercus alienna, Quercus variabilis. As a group of understory, there are 5 species; Platycarya strobilacea, Prunus sargentii, Styrax japonica, Eurya japonica, Morus bombycis. Also as a group of shrub, there were 15 kinds of species; Ulmus pavifolia, Ulmus davidiana, Lindera obtusiloba, Elaeagnus macrophylla, Mallotus japonicus, Ligustrum obtusifolium, Sorbus alnifolia, Rhus trichocarpa, Zanthoxylum schinifolium, Rosa wichuraiana, Rhus chinensis, Viburnum erosum, Rhododendron mucronulatum, Rhododendron yedoense, Indigofera pseudotinctoria. And as a group of edge vegetation, there were 10 kinds of species; Japanese Angelica, Symplocos chinensis, Pittosporum tobira, Lespedeza maximowiczii, Lespedeza bicolor, Rubus coreanus, Rubus idaeus, Vitis thunbergii, Ampelopsis brevipedunculata, Rosa multiflora. Vegetation restoration models of Pinus thunbergii community were calculated the units $400m^2$ for the average populations of the woody layer is 24 in canopy layer, 35 in understory layer, 410 in shrub layer, 34% herbaceous layer ground cover. And the average of breast-high area and canopy area is $10,852cm^2$ in canopy layer, in understory layer $1,546cm^2$, in shrub layer $1,158,660cm^2$. The shortest distance between trees is calculated as 2.0m in canopy layer, 1.9m in understory layer.