• Journal of Korea Multimedia Society
• /
• v.8 no.3
• /
• pp.313-321
• /
• 2005

Digital halftoning is a process to produce a binary image so that the original image and its binary counterpart appear similar when observed from a distance. Among digital halftoning methods, error diffusion is a procedure for generating high quality bilevel images from continuous-tone images but blurs the edge information in the bilevel images. To solve this problem, we propose the improved error diffusion using local spatial information of the original images. Based on the fact that the human vision perceives not a pixel but local mean of input image, we compute edge enhancement information(EEI) by appling the ratio of a pixel and its adjacent pixels to local mean. The weights applied to local means is computed using the ratio of local activity measure(LAM) to the difference between input pixels of 3$\times$3 blocks and theirs mean. LAM is the measure of luminance changes in local regions and is obtained by adding the square of the difference between input pixels of 3$\times$3 blocks and theirs mean. We add the value to a input pixel of quantizer to enhance edge. The performance of the proposed method is compared with conventional methods by measuring the edge correlation. The halftone images by using the proposed method show better quality due to the enhanced edge. And the detailed edge is preserved in the halftone images by using the proposed method. Also the proposed method improves the quality of halftone images because unpleasant patterns for human visual system are reduced.

• Journal of Oral Medicine and Pain
• /
• v.23 no.4
• /
• pp.379-385
• /
• 1998

A patient with TMJ osteoarthritis and anterior open bite was treated with an intermaxillary traction device. Pretreatment examination revelaed a pain in both TMJ during mouth opening, moderate tendernesso f left sternocleidomastoid and right trapezius muscles. Anterior open Bite was aobserved with interincisal distance of 2mm. Tomograms and MRI showed anterior disc displacement withouit reductoin of both temporomandibular joints, and the condyles were flattened and slightly eroded. A pair of full-coverage occlusal appliances was made on both maxillary and mandibular dentition, with pivoting fulcrum on the site of the second moalr. Traction force was gained by the intermaxillary orthodontic elastics which were hooked by orthodontic brackets on the labial surfaces of the upper and lower anterior and premolar teeth. After 8 weeks of traction treatment, the joint pain was subsided completely and the anterior open bite was closed to get an edge to edge relationship of anterior teeth.

• Journal of Oral Medicine and Pain
• /
• v.23 no.4
• /
• pp.369-377
• /
• 1998

A patient with TMJ osteoarthritis and anterior open bite was treated with an intermaxillary traction device. Pretreatment examination revelaed a pain in both TMJ during mouth opening, moderate tendernesso f left sternocleidomastoid and right trapezius muscles. Anterior open Bite was aobserved with interincisal distance of 2mm. Tomograms and MRI showed anterior disc displacement withouit reductoin of both temporomandibular joints, and the condyles were flattened and slightly eroded. A pair of full-coverage occlusal appliances was made on both maxillary and mandibular dentition, with pivoting fulcrum on the site of the second moalr. Traction force was gained by the intermaxillary orthodontic elastics which were hooked by orthodontic brackets on the labial surfaces of the upper and lower anterior and premolar teeth. After 8 weeks of traction treatment, the joint pain was subsided completely and the anterior open bite was closed to get an edge to edge relationship of anterior teeth.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.1
• /
• pp.320-324
• /
• 2015

Mutual coupling between antenna elements of a linear microstrip patch antenna array positioned along the H-plane including the effect of edge reflections is investigated. Simple formulas are presented for the estimation of the grounded dielectric substrate size with minimum mutual coupling. The substrate sizes calculated by these formulas are in good agreement with those obtained by the full-wave simulation and experimental measurement. The substrate size with minimum mutual coupling is a function of the effective dielectric constant for surface waves and the distance between the antenna centers. The substrate size with minimum mutual coupling decreases as the effective dielectric constant for surface waves on a finite grounded dielectric substrate increases.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.3
• /
• pp.57-68
• /
• 1993

Air Wiping technique is widely used because of easy and efficient coating control in present CGL. Coaring weight is decided by nozzle header pressure, strip line speed and distance between strip and nozzle. Coating defects are results from unbalance of these factors and coating equipment calibration inaccuracy. Therefore, this study is mainly dealing with the cause of coating defects such as edge overcoating and coating deviation. The coptimum working condition is suggested by formulated coating model using collected working data. We developed two demension analysis program for air flow in nozzle and calculated dynamic pressure and air velocity with this program. The productivity and coating guality are improved by applying the result of this reserach.

• Korean Journal of Mathematics
• /
• v.23 no.4
• /
• pp.607-618
• /
• 2015

An L(2; 1)-labeling of a graph G is a function f from the vertex set V (G) to the set of all non-negative integers such that ${\mid}f(u)-f(v){\mid}{\geq}2$ if d(u, v) = 1 and ${\mid}f(u)-f(v){\mid}{\geq}1$ if d(u, v) = 2. The ${\lambda}$-number of G, denoted ${\lambda}(G)$, is the smallest number k such that G admits an L(2, 1)-labeling with $k=\max\{f(u){\mid}u{\in}V(G)\}$. In this paper, we consider the square of a cycle and provide exact value for its ${\lambda}$-number. In addition, we also completely determine its edge span.

• Journal of Chest Surgery
• /
• v.25 no.10
• /
• pp.1157-1160
• /
• 1992

Aortic valve repair with the use of tailored autologous pericardial extension to the native cusp was performed in one patient with rheumatic aortic valve incompetence. The patient was a 10-year-old girl with Grade II aortic regurgitation and tiny postoperative recannalization of the patent ductus arteriosus. The left aortic coronary cusp appeared to be a little thickened and a cicatrical shortening of the distance between the free edge of the cusp and its annular attachment. A semilunar shaped patch of autologous pericardium, treated with glutaraldehyde solution[6 minutes in 0.6% solution] was sutured along the free edge of the left coronry cusp. Postoperative recovery was uneventful. Echocardiography 8 months later showed Grade I aortic regurgitation. She is now conducting as usual life.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.12
• /
• pp.72-76
• /
• 1996

A CMP system is newly proposed and analyzed by a home-made computer progarm. The proposed system is possibly to lower bull's eye effects such that the planarity of a wafer surface using a CMP system can be drasitcally improved. The optimum conditions for a design of the proposed system are verified using the home-made simulation program. For the proposed CMP system with a 12" diameter of platen, the optimum design conditons are the 0.09", 0.10", 0.12", and 0.14", clearance from the platern edge for wafer diameters of 5", 6", 8", and 12", respectively. These clear distance such as 0.09", 0.10", 0.12", and 0.14" are optimum lengths of the sample wafers extended ffrom the platen edge. In other words, shorter orbital lengths result in lowering of Bull's eye effects.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.12
• /
• pp.1115-1120
• /
• 2003

In this paper, we investigated the position dependent stress distribution of indium-tin-oxide (ITO) film on Polycarbonate (PC) substrate by external bending force. It was found that there are the maximum crack density at the center position and decreasing crack density as goes to the edge, In accordance with crack distribution, it was observed that the change of electrical resistivity of ITO islands is maximum at the center and decrease as goes to the edge. From the result that crack density is increasing at same island position as face plate distance (L) decreases, it is evident that the more stress is imposed on same island position as L decreases.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.13 no.4
• /
• pp.195-204
• /
• 2018

Lane keeping assist and departure prevention system are the key functions of ADAS. In this paper, we propose lane detection method which uses Gaussian function based RANSAC. The proposed method consists mainly of IPM (inverse perspective mapping), Canny edge detector, and Gaussian function based RANSAC (Random Sample Consensus). The RANSAC uses Gaussian function to extract the parameters of straight or curved lane. The proposed RANSAC is different from the conventional one, in the following two aspects. One is the selection of sample with different probability depending on the distance between sample and camera. Another is the inlier sample score that assigns higher weights to samples near to camera. Through simulations, we show that the proposed method can achieve good performance in various of environments.