• 제목/요약/키워드: Edge AI

검색결과 120건 처리시간 0.025초

마이크로리터 부피의 에탄올 수용액 농도 검출을 위한 고감도 마이크로스트립 패치 센서 안테나 (High-Sensitivity Microstrip Patch Sensor Antenna for Detecting Concentration of Ethanol-Water Solution in Microliter Volume)

  • 여준호;이종익
    • 한국항행학회논문지
    • /
    • 제26권6호
    • /
    • pp.510-515
    • /
    • 2022
  • 본 논문에서는 마이크로리터 부피의 에탄올 수용액 농도를 검출하기 위한 마이크로스트립 패치 센서 안테나를 제안하였다. 비유전율 변화에 대한 감도를 높이기 위해 패치의 방사 모서리에 직사각형 슬롯을 추가하였다. 높은 비유전율과 높은 손실 탄젠트를 가지는 극성 액체인 에탄올 수용액을 패치에 놓으면 발생하는 낮은 입력 저항을 개선하기 위해 1/4 파장 임피던스 변환기를 50 오옴 급전선과 패치 사이에 추가하여 0.76 mm 두께의 RF-35 기판에 안테나를 제작하였다. 원통형 용기를 아크릴로 제작하여 15 마이크로리터 부피의 에탄올 수용액을 에탄올 농도 0% ~ 100%까지 20% 농도 간격으로 만들어 실험하였다. 실험 결과, 에탄올 수용액의 에탄올 농도가 0%에서 100%로 증가할 때 공진 주파수가 1.947 GHz에서 2.509 GHz로 증가하여 농도검출 센서로서의 성능을 입증하였다.

WELD REPAIR OF GAS TURBINE HOT END COMPONENTS

  • Chaturvedi, M.C.;Yu, X.H.;Richards, N.L.
    • 대한용접접합학회:학술대회논문집
    • /
    • 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
    • /
    • pp.235-243
    • /
    • 2002
  • Ni-base superalloys are used extensively in industry, both in aeroengines and land based turbines. About 60% by weight of most modern gas turbine engine structural components are made of Ni-base superalloys. To satisfy practical demands, the efficiency of gas turbine engines has been steadily and systematically increased by design modifications to handle higher turbine inlet or firing temperatures. However, the increase in operating temperatures has lead to a decrease in the life of components and increase in costs of replacement. Moreover, around 80% of the large frame size industrial/utility gas turbines operating in the world today were installed in the mid-sixties to early seventies and are now 25 to 30 years old. Consequently, there are greater opportunities now to repair and refurbish the older models. Basically, there are two major factors influencing the weldability of the cast alloys: strain-age cracking and liquation cracking. Susceptibility to strain-age cracking is due to the total Ti plus AI content of the alloy; Liquation cracking is due either to the presence of low melting constituents or constitutional liquation of constituents. Though Rene 41 superalloy has 4.5wt.% total Ti and Al content and falls just below the safe limit proposed by Prager et al., controlled grain size and special heat treatments are needed to obtain crack-free welds. Varying heat treatments and filler materials were used in a laboratory study, then the actual welding of service parts was carried out to verity the possibility of crack-tree weld of components fabricated from Rene 41 superalloy. The microstructural observations indicated that there were two kinds of carbides in the FCC matrix. MC carbides were located along the grain boundaries, while M$_{23}$C$_{6}$ carbide was located both inter and intra granularly. Two kinds of filler materials, Rene 41 and Hastelloy X were used to gas tungsten arc weld a patch into the sheet metal, along with varying pre-weld heat treatments. The microstructure, hardness and tensile tests were determined. The service distressed parts were categorized into three classes: with large cracks, with medium cracks and with small or no visible cracks. No significant difference in microstructure among the specimens was observed. Specimens were cut from the corner and the straight edge of the patch repair, away from the corner. The only cracks present were found to be associated with inadequate surface preparation to remove oxidation. Guidelines for oxide removal and the welding procedures developed in the research enabled crack-free welds to be produced.d.

  • PDF

Expression of Ang-2/Tie-2 and PI3K/AKT in Colorectal Cancer

  • Zhang, Ji-Hong;Wang, Li-Hua;Li, Xiang-Jun;Wang, Ai-Ping;Reng, Li-Qun;Xia, Feng-Guo;Yang, Zhi-Ping;Jiang, Jing;Wang, Xiao-Dan;Wen, Chun-Yang
    • Asian Pacific Journal of Cancer Prevention
    • /
    • 제15권20호
    • /
    • pp.8651-8656
    • /
    • 2014
  • Purpose: To study the expression of angiogenin-2 (Ang-2) and its receptor Tie-2 in colorectal cancer and discuss the possible mechanisms behind this process. Materials and Methods: Using the streptavidin-peroxidase (SP) immunohistochemical method, paraffin sections from 100 colorectal cancer samples and 10 samples from tumor-adjacent normal tissue (> 2 cm from the edge of the gross tumor) were tested for protein expression of Ang-2, Tie-2, PI3K, and AKT. Reverse transcription-polymerase chain reaction and Western blots were further used to measure expression of the 4 genes and proteins in 20 freshly-resected colorectal cancer samples and tumor-adjacent normal tissues. Results: In colorectal cancer tissues, the expression of the Ang-2, Tie-2, PI3K, and AKT genes and their proteins was significantly higher than in tumor-adjacent normal tissues. Protein expression in poorly-differentiated adenocarcinoma was higher than that in well and moderately differentiated adenocarcinoma. According to Duke's classification, the protein expression in Stages C and D was significantly higher than that in Stages A and B. In the group with lymphatic metastasis, the protein expression was higher than that without lymphatic metastasis. Conclusions: In colorectal cancer, the expression of the Ang-2, Tie-2, PI3K, and AKT genes and their proteins is markedly higher than those in tumor-adjacent normal tissues. No correlation was observed between protein expression and gender, location, or histologic type. Correlations did exist between protein expression and differentiation level, stage of Duke's classification, and lymphatic metastasis; in colorectal cancer tissues with lower differentiation levels, higher stages of Duke's classification, and lymphatic metastasis, the expression of all 4 proteins was higher. The study of their expression patterns and relationships with aggression and metastasis will provide a valuable experimental foundation for assessing prognosis and targeted therapy of colorectal cancer.

OPC UA를 활용한 이기종 로봇의 실시간 디지털 트윈 설계 및 구현 (Design and Implementation of Real-time Digital Twin in Heterogeneous Robots using OPC UA)

  • 김지형
    • 한국인터넷방송통신학회논문지
    • /
    • 제23권4호
    • /
    • pp.189-196
    • /
    • 2023
  • 4차 산업혁명을 주도하는 기술로서 IoT, 빅데이터, 인공지능, CPS 등이 발전하면서 산업 현장에서 생산성과 효율성을 향상시키기 위한 디지털 트윈의 중요성이 부각되고 있다. 디지털 트윈은 실제 물리적 객체들의 디지털 복제로서, 객체의 속성과 상태를 유지하며 작동하는 가상 모델이다. CPS는 사이버 세계와 물리 세계의 상호작용을 위한 시스템으로, 디지털 트윈은 CPS의 고급형 기술로 볼 수 있다. 디지털 트윈은 AI, XR, 5G 등 다양한 요소 기술의 등장으로 구현 속도가 가속화되었다. 센서 기술의 발전과 IoT, 인공지능, 빅데이터, 클라우드 등의 관련 기술 발전으로 디지털 트윈 시장이 성장하고 있다. 이에 따라 기업들은 비즈니스 인텔리전스와 관련된 솔루션을 도입하여 프로세스 최적화, 비용 효율성, 생산성을 향상시키는 경향이 있다. 본 연구에서는 디지털 트윈 기술과 CPS를 결합하여 이기종 로봇의 실시간 3D 디지털 트윈을 구축하는 것이 목표이다. 이를 위해 유비씨의 FLEXING CPS와 FLEXING EDGE를 활용하여 데이터 수집과 관리를 수행한다. 프로젝트 구성원은 프로토콜 설정, 데이터 수집 및 전달, 3D 디지털 트윈 시뮬레이션을 담당한다. 이를 통해 CPS와 디지털 트윈을 통합한 기술의 가능성을 확인하고, 산업 현장에서 생산성과 효율성을 향상시킬 수 있다.

육군 정보공유체계에 사회관계망 분석을 적용하기 위한방안: 사례 연구 (Approaches to Applying Social Network Analysis to the Army's Information Sharing System: A Case Study)

  • 박건우
    • 문화기술의 융합
    • /
    • 제9권5호
    • /
    • pp.597-603
    • /
    • 2023
  • 군사 작전의 패러다임은 정보기술의 발전으로 플랫폼 중심전에서 네트워크 중심전, 그리고 정보 중심전으로 진화해왔다. 최근 몇 년간 빅 데이터, 인공지능, 사물인터넷(IoT)과 같은 첨단 기술의 발전으로 인해 군사 작전은 인공지능 기반의 지식 중심전(KCW)으로 진화하고 있다. 이에 따라 군은 신뢰성 있는 C4I (Command, Control, Communication, Computer, Intelligence) 시스템 구축을 위해 첨단 정보통신기술(ICT)의 통합에 큰 비중을 두고 있다. 본 연구는 C4I 시스템의 전투 능력 향상, 네트워크 기반 환경에서의 최적 활용, 정보 흐름의 효율적인 부하분산, 원활한 의사소통, 지식공유의 효과적인 구현 등을 분석하고 평가하기 위해 데이터 마이닝 기법을 적용할 필요성을 강조한다. 데이터 마이닝은 현대 빅 데이터 분석의 핵심 기술로, 본 연구는 데이터 마이닝을 활용하여 실제 사례를 분석하고 군의 지휘 통제체계의 효율성을 극대화하는 실용적인 전략을 제안하였다. 연구 결과는 C4I 시스템의 성능을 더 깊게 이해하고 현대 군사 작전에 지식 중심전을 강화하는 데 유용한 통찰을 제공할 것으로 기대한다.

Incremental Image Noise Reduction in Coronary CT Angiography Using a Deep Learning-Based Technique with Iterative Reconstruction

  • Jung Hee Hong;Eun-Ah Park;Whal Lee;Chulkyun Ahn;Jong-Hyo Kim
    • Korean Journal of Radiology
    • /
    • 제21권10호
    • /
    • pp.1165-1177
    • /
    • 2020
  • Objective: To assess the feasibility of applying a deep learning-based denoising technique to coronary CT angiography (CCTA) along with iterative reconstruction for additional noise reduction. Materials and Methods: We retrospectively enrolled 82 consecutive patients (male:female = 60:22; mean age, 67.0 ± 10.8 years) who had undergone both CCTA and invasive coronary artery angiography from March 2017 to June 2018. All included patients underwent CCTA with iterative reconstruction (ADMIRE level 3, Siemens Healthineers). We developed a deep learning based denoising technique (ClariCT.AI, ClariPI), which was based on a modified U-net type convolutional neural net model designed to predict the possible occurrence of low-dose noise in the originals. Denoised images were obtained by subtracting the predicted noise from the originals. Image noise, CT attenuation, signal-to-noise ratio (SNR), and contrast-to-noise ratio (CNR) were objectively calculated. The edge rise distance (ERD) was measured as an indicator of image sharpness. Two blinded readers subjectively graded the image quality using a 5-point scale. Diagnostic performance of the CCTA was evaluated based on the presence or absence of significant stenosis (≥ 50% lumen reduction). Results: Objective image qualities (original vs. denoised: image noise, 67.22 ± 25.74 vs. 52.64 ± 27.40; SNR [left main], 21.91 ± 6.38 vs. 30.35 ± 10.46; CNR [left main], 23.24 ± 6.52 vs. 31.93 ± 10.72; all p < 0.001) and subjective image quality (2.45 ± 0.62 vs. 3.65 ± 0.60, p < 0.001) improved significantly in the denoised images. The average ERDs of the denoised images were significantly smaller than those of originals (0.98 ± 0.08 vs. 0.09 ± 0.08, p < 0.001). With regard to diagnostic accuracy, no significant differences were observed among paired comparisons. Conclusion: Application of the deep learning technique along with iterative reconstruction can enhance the noise reduction performance with a significant improvement in objective and subjective image qualities of CCTA images.

THEORETICAL STUDY ON OBSERVED COLOR-MAGNITUDE DIAGRAMS

  • Lee, See-Woo
    • 천문학회지
    • /
    • 제12권1호
    • /
    • pp.41-70
    • /
    • 1979
  • From $B\ddot{o}hm$-Vitense's atmospheric model calculations, the relations, [$T_e$, (B-V)] and [B.C, (B-V)] with respect to heavy element abundance were obtained. Using these relations and evolutionary model calculations of Rood, and Sweigart and Gross, analytic expressions for some physical parameters relating to the C-M diagrams of globular clusters were derived, and they were applied to 21 globular clusters with observed transition periods of RR Lyrae variables. More than 20 different parameters were examined for each globular cluster. The derived ranges of some basic parameters are as follows; $Y=0.21{\sim}0.33,\;Z=1.5{\times}10^{-4}{\sim}4.5{\times}10^{-3},\;age,\;t=9.5{\sim}19{\times}10^9$ years, mass for red giants, $m_{RG}=0.74m_{\odot}{\sim}0.91m_{\odot}$, mass for RR Lyrae stars, $m_{RR}=0.59m_{\odot}{\sim}0.75m_{\odot}$, the visual magnitude difference between the turnoff point and the horizontal branch (HB), ${\Delta}V_{to}=3.1{\sim}3.4(<{\Delta}V_{to}>=3.32)$, the color of the blue edge of RR Lyrae gap, $(B-V)_{BE}=0.17{\sim}0.21=(<(B-V)_{BE}>=0.18),\;[\frac{m}{L}]_{RR}=-1.7{\sim}-1.9$, mass difference of $m_{RR}$ relative to $m_{RG},(m_{RG}-m_{RR})/m_{RG}=0.0{\sim}0.39$. It was found that the ranges of derived parameters agree reasonably well with the observed ones and those estimated by others. Some important results obtained herein can be summarized as follows; (i) There are considerable variations in the initial helium abundance and in age of globular clusters. (ii) The radial gradient of heavy element abundance does exist for globular clusters as shown by Janes for field stars and open clusters. (iii) The helium abundance seems to have been increased with age by massive star evolution after a considerable amount (Y>0.2) of helium had been attained by the Big-Bang nucleosynthesis, but there is not seen a radial gradient of helium abundance. (iv) A considerable amount of heavy elements ($Z{\sim}10{-3}$) might have been formed in the inner halo ($r_{GC}$<10 kpc) from the earliest galactic co1lapse, and then the heavy element abundance has been slowly enriched towards the galactic center and disk, establishing the radial gradient of heavy element abundance. (v) The final galactic disk formation might have taken much longer by about a half of the galactic age than the halo formation, supporting a slow, inhomogeneous co1lapse model of Larson. (vi) Of the three principal parameters controlling the morphology of C-M diagrams, it was found that the first parameter is heavy clement abundance, the second age and the third helium abundance. (vii) The globular clusters can be divided into three different groups, AI, BI and CII according to Z, Y an d age as well as Dickens' HB types. BI group clusters of HB types 4 and 5 like M 3 and NGC 7006 are the oldest and have the lowest helium abundance of the three groups. And also they appear in the inner halo. On the other hand, the youngest AI clusters have the highest Z and Y, and appear in the innermost halo region and in the disk. (viii) From the result of the clean separations of the clusters into three groups, a three dimensional classification with three parameters, Z, Y and age is prsented. (ix) The anomalous C-M diagrams can be expalined in terms of the three principal parameters. That is, the anomaly of NGC 362 and NGC 7006 is accounted for by the smaller age of the order of $1{\sim}2{\times}10^9$ years rather than by the helium abundance difference, compared with M 3. (x) The difference in two Oosterhoff types I and II can be explained in terms of the mean mass difference of RR Lyrae variables rather than in terms of the helium abundance difference as suggested by Stobie. The mean mass of the variables in Oosterhoff type I clusters is smaller by $0.074m_{\odot}$ which is exactly consistent with Rood's estimate. Since it was found that the mean mass of RR Lyrae stars increases with decreasing Z, the two Oosterhoff types can be explained substantially by the metal abundance difference; the type II has Z<$3.4{\times}10^{-4}$, and the type I has higher Z than the type II.

  • PDF

포스트 코로나 시대 고고유산 교육의 가치와 지속가능성을 위한 전략 (Strategies for Increasing the Value and Sustainability of Archaeological Education in the Post-COVID-19 Era)

  • 김은경
    • 헤리티지:역사와 과학
    • /
    • 제55권2호
    • /
    • pp.82-100
    • /
    • 2022
  • 코로나19 팬데믹이라는 위기 상황과 4차 산업혁명시대를 경험하게 되면서 고고유산 교육 역시 새로운 국면을 맞이하게 되었다. '비대면', '비접촉'이 일상이 된 현 상황과 각종 디지털기술이 발달하고 있는 시대를 맞이함에 따라 직접 경험하고, 조작적 체험이 주를 이루는 고고유산 교육은 여러모로 많은 변화가 발생하였다. 이 글은 포스트코로나 시대의 트렌드에 부응하는 한편, 4차 산업혁명시대에 필요한 고고유산 교육의 발전 방안과 지속가능한 전략을 모색해 본 것이다. 고고유산 교육은 4차 산업혁명시대에 필요한 역량은 물론 개인들의 정서적 만족감과 행복감을 고취시키는데 매우 적합한 교육 형태이다. 그중에서도 현 시대의 맥락을 반영한 창의적 인재양성 및 문제해결력, 자기효능감을 향상시킬 수 있는 교육의 형태로 고고유산 메이커교육이 주목된다. 이러한 메이커교육은 구성주의를 기반한 교육으로 진행될 필요가 있고, 다양한 연령별 특징을 고려하여 구체적인 학습목표 및 효과를 설정하여 설계되어야 한다. 또한 고고유산 역시 VR, AR, 클라우드, 드론 영상 기술을 적용한 다양한 ICT 활용 콘텐츠들이 개발 및 확대되고 있다. 그중에서도 온택트로 진행되는 고고유산 디지털 교육은 비대면이라는 상황 속에서도 쌍방향 소통이 가능한 커뮤니티 활성화 방안을 모색해야 한다. 아울러 온택트 교육은 교육이라는 측면을 고려해야 하므로 문화적 문해를 성장시키기 위한 목적이 추가적으로 설정되어야 한다. 이러한 고고유산 콘텐츠 개발은 온택트 교육에 최적화된 학술성을 담지한 스토리자원이 확보되어야 하는데, '문화콜라주'의 입장에서 다양한 융합적 콘텐츠를 제작하는 동시에 학습자의 흥미와 학습 능력, 학습 목적을 고려한 AI기능이 추가될 필요가 있다고 생각한다. 또한 온라인으로 진행되는 고고유산 콘텐츠 교육은 추후 실물을 접할 수 있는 동기부여나 현장학습을 고려한 선행학습, 보완학습으로 진행되어야 한다. 결국 고고유산 온택트 교육은 현재의 트렌드에 부응하는 최첨단 기술을 활용하여 진행되겠지만, 그와 연동하여 발견의 학습, 질문-탐구형 학습 모두가 가능한 구성주의학습을 위한 지속적인 노력이 필요하다.

이물 객체 탐지 성능 개선을 위한 딥러닝 네트워크 기반 저품질 영상 개선 기법 개발 (Development of deep learning network based low-quality image enhancement techniques for improving foreign object detection performance)

  • 엄기열;민병석
    • 인터넷정보학회논문지
    • /
    • 제25권1호
    • /
    • pp.99-107
    • /
    • 2024
  • 경제성장과 산업 발전에 따라 반도체 제품부터 SMT 제품, 전기 배터리 제품에 이르기 까지 많은 전자통신 부품들의 제조과정에서 발생하는 철, 알루미늄, 플라스틱 등의 이물질로 인해 제품이 제대로 동작하지 않거나, 전기 배터리의 경우 화재를 발생하는 문제까지 심각한 문제로 이어질 가능성이 있다. 이러한 문제를 해결하기 위해 초음파나 X-ray를 이용한 비파괴 방법으로 제품 내부에 이물질이 있는지 판단하여 문제의 발생을 차단하고 있으나, X-ray 영상을 취득하여 이물질이 있는지 판정하는 데에도 여러 한계점이 존재한다. 특히. 크기가 작거나 밀도가 낮은 이물질들은 X-Ray장비로 촬영을 하여도 보이지 않는 문제점이 있고, 잡음 등으로 인해 이물들이 잘 안 보이는 경우가 있으며, 특히 높은 생산성을 가지기 위해서는 빠른 검사속도가 필요한데, 이 경우 X-ray 촬영시간이 짧아지게 되면 신호 대비 잡음비율(SNR)이 낮아지면서 이물 탐지 성능이 크게 저하되는 문제를 가진다. 따라서, 본 논문에서는 저화질로 인해 이물질을 탐지하기 어려운 한계를 극복하기 위한 5단계 방안을 제안한다. 첫번째로, Global 히스토그램 최적화를 통해 X-Ray영상의 대비를 향상시키고, 두 번째로 고주파 영역 신호의 구분력을 강화하기 위하여 Local contrast기법을 적용하며, 세 번째로 Edge 선명도 향상을 위해 Unsharp masking을 통해 경계선을 강화하여 객체가 잘 구분되도록 한다, 네 번째로, 잡음 제거 및 영상향상을 위해 Resdual Dense Block(RDB)의 초고해상화 방법을 제안하며, 마지막으로 Yolov5 알고리즘을 이용하여 이물질을 학습한 후 탐지한다. 본 연구에서 제안하는 방식을 이용하여 실험한 결과, 저밀도 영상 대비 정밀도 등의 평가기준에서 10%이상의 성능이 향상된다.

ICT기술을 활용한 곤충스마트팩토리팜의 현황과 미래 (Current status and future of insect smart factory farm using ICT technology)

  • 석영식
    • 식품과학과 산업
    • /
    • 제55권2호
    • /
    • pp.188-202
    • /
    • 2022
  • 최근 곤충산업은 애완곤충, 천적 등 산업에서 사료, 식용, 약용곤충으로 그 활용범위가 확대되면서 곤충 원료의 품질관리에 대한 요구가 커지고 곤충 제품의 안전성 확보에 관심이 높아지고 있다. 전세계 곤충산업 시장은 많은 소규모 농가형 기업과 소수의 대기업으로 구성되어 있으며 전통적인 수작업 사육에서 고도로 자동화되고 기술적으로 진보된 플랜트형 사육 등 다양한 기술 수준의 사육형태가 존재한다. 산업규모가 확대되는 과정에서 사육환경의 설계는 온습도, 공기질 조절과 병원체 및 기타 오염 물질의 전파를 방지하는 것은 중요한 성공 요인이 되며 사육에서 부화, 사육, 가공에 이르기까지 생산의 안전성을 유지하기 위해서 통일된 운영시스템 아래 통제된 환경이 필요하다. 따라서 곤충의 생육과 사육환경의 빅데이터화 된 데이터베이스를 기반으로 외부 환경 변화에도 안정적인 사육환경 유지가 가능하고 곤충성장에 맞추어 사육환경을 제어하며 노동력 감소와 생산성 향상을 이루기 위한 ICT 기반 곤충 스마트팩토리팜의 설계 및 운용알고리즘을 개발하는 것은 곤충산업 발전의 필수 선결조건이 되고 있다. 특히 유럽 상업용 곤충사육시설은 상당한 투자자의 관심을 받아 곤충 회사가 대규모 생산시설로 건설하고 있는데 이는 EU가 2017년 7월 물고기양식 사료원료로 곤충 단백질의 사용을 승인한 후 가능해졌으며 이를 기반으로 곤충산업의 식용, 의료 등 다른 분야도 첨단기술을 접목하는 현상이 가속화되었다. 외국 곤충산업은 주로 전세계 식품 생산량의 30%에 이르는 소비 전 폐기물이라고 불리는 식품회사의 생산과잉 원료 등을 업사이클링을 통해 재활용생태계를 형성하는데 반해 우리나라는 가정 및 가게에서 발생하는 음식물폐기물 또는 농산물 가공부산물을 주로 이용한다는 점에서 사료 수집과 영양성분 유지, 위생 등 지속가능한 산업생태계를 이루는 데 어려움을 겪고 있다. 또한, 각 곤충 종은 고유하고 특정 사육기술을 요구하고 있다는 점을 감안할 때 곤충사육자는 각기 다른 종별 접근 방식을 채택해야 하는데 대부분의 곤충기업은 여전히 소규모로 운영되며 특히 농가형 기업의 경우 지식과 경험이 도제식으로 전승되는 경우가 많아 표준화되고 규격화된 사육기술이 유지되기 어려운 반면, 일부 곤충 기업은 대규모 사육시설에 스마트 통합 제어시스템을 도입하여 먹이주기, 물주기, 취급, 수확, 청소 시스템, 가공, 품질관리, 포장 및 보관과 같은 곤충 생산과 관련된 요소가 최적화된 사육 환경과 사육프로세스로 표준화되어가는 모습을 보이고 있으며 심지어 일부 유럽기업은 AI기술로 구동되는 완전 자율 모듈식 곤충시스템으로 사육 유지관리를 하고 있는 사례도 등장하기 시작하였다. 향후 전세계 곤충산업은 공급업체로부터 알이나 작은 유충을 구입하고 곤충을 성숙시키기까지 애벌레의 비육 즉 생산원료에 중점을 두는 시스템과 알을 낳고 수확하고 유충의 초기 전처리에 이르기까지 전체 생산 과정을 다루는 시스템, 곤충 유충 생산의 모든 단계와 제분, 지방 제거 및 단백질 또는 지방 분획 등 추가 가공 단계를 다루는 대규모 생산시스템 등으로 점점 세분화할 것으로 본다. 우리나라에서도 인공지능 및 ICT 첨단기술을 활용한 곤충스마트팩토리팜 연구 및 개발 등이 가속화되고 있어 곤충이 기존 사료, 식품 뿐만 아니라 천연 플라스틱 또는 천연성형소재 등 2차산업의 탄소제로 소재로 활용할 수 있도록 특정 종 육종과정 단축이나 기능성 강화를 위한 사육제어가 가능하도록 곧 곤충 스마트팩토리팜 한국형 맞춤사육시스템이 등장할 수 있을 것으로 보이며, 특히 곤충 제품의 지속 가능성을 높이기 위해 사료 및 자원 사용에 대한 통합 소프트웨어 접근 방식을 개발하는 것에 중점을 두고 진행되고 있다.