• Clean Technology
• /
• v.27 no.1
• /
• pp.1-8
• /
• 2021

Due to the negative impacts of microplastics (MPs) on the ecosystem, the investigation of its occurrence and its treatment from sewage and wastewater treatment plants (WWTPs) have received a lot of attention in the recent years. Most MPs are precipitated and removed with the sludge during the treatment process. Proper sludge management is immensely necessary to avoid MP exposure in the environment. However, the domestic research on this aspect is limited. This study reviews appropriate sludge management approaches to decrease environmental MP exposure. This can be achieved through investigating sludge generation and treatment, regulation laws and government policy trends with an emphasis on WWTPs. The ratio of sludge in sewage treatment plants has been observed to be highest in recycling followed by incineration and landfills. Recycling is the highest in fuel followed by construction materials and composting. For WWTPs, the highest ratio is in recycling followed by fuel and landfills, and recycling is confirmed in the following order: incineration > after composting > after solidification > earthworm breeding. Treatment approaches that can increase the exposure of MPs to the ecosystem are considered to be used in landfills and agricultural fields. However, this method is not appropriate given the insufficient capacity of domestic landfills and the sufficient supply of existing chemical and animal manure fertilizers. Instead, it would be rational in terms of environmental preservation to expand the use of fuel and energy in connection with the new and renewable energy policy, and to actively seek the use of sub-materials for construction materials. In order to secure the basic data for the effectiveness of future planning and revision of related laws, it is required to perform an in-depth investigation of the sludge supply and demand status along with the environmental and economic effects.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.16 no.6
• /
• pp.69-84
• /
• 2021

As industrial structural changes in the 4th Industrial Revolution have recently led to the need for fostering high-tech industries and high-tech manufacturing industries have been showing high value-added creation, the importance of high-tech manufacturing ventures has increased a lot as well. As a result of this, the government is actively supporting and fostering them. However, it appears that high-tech manufacturing ventures seem to have a lot of difficulty in securing competitive advantages due to the lack of internal core competencies and experience in the rapidly changing international economic conditions. In order for high-tech manufacturing ventures to strengthen internal core competencies, external collaborations with other companies or institutions which have diverse experience, technology skills and abundant resources are actively promoted. Accordingly, based on resource-based theory and transaction cost theory, the authors analyzed the effects of the high-tech manufacturing ventures'external collaborations on internal core competencies and management performance in this study. In order to verify the hypothesis of this study, the 2020 data on"The Research on the Precision Status of Ventures'compiled by the Ministry of SMEs and Startups since 1999 were utilized. According to the results of this study, the experience of external collaborations had a positive impact on the internal core competencies and non-financial management performance, while there was no direct impact on financial management performance. Moreover, the relationship between the experience of external collaborations and management performance is mediated by the internal core competencies. Additionally, it was found that the internal core competencies positively affected both non-financial and financial management performances, and non-financial management performance again had a significant impact on the financial management performance. Finally, the experience of external collaborations had a positive impact on both development, manufacturing, and marketing factors forming the internal core competencies. However, the impacts of individual factors were different in the management performance. Development and marketing factors were shown to have a significant impact on both non-financial and financial management performance, while the manufacturing factor had a significant impact only on financial management performance.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.50 no.1
• /
• pp.1-19
• /
• 2022

The Geumgang Pine (Pinus densiflora) Forest in Sogwang-ri, Uljin has traditionally been a pine tree protection area (prohibited forest) for timber production purposes, and is now designated and managed as a protected area for forest genetic resource conservation by the Korea Forest Service. This study, we analyzed topographical characteristics, existing vegetation, tree age, and plant community structure, and proposed a sustainable management method for the Geumgang Pine (Pinus densiflora) Forest in Sogwang-ri, Uljin for timber havesting purposes. The topographical characteristics of the target area were 36.7% ridges and 38.7% valleys; the ratio of ridges to valleys was similar, and the slopes formed 24.7% of the total area. The types of pine forest communities are divided into six types based on the progress of pine forest renewal, the competition with other species such as deciduous broadleaf trees, and the formation of layered structures. It has been confirmed that the age of the large-diameter pine trees (40~60cm in diameter) is approximately 60~70 years, which is relatively low. As a result of the analysis of the relative importance percentage and layered structure, differences depended on the progress of the pine forest renewal project, and not only the maintenance of the pine forest, but also the creation of a secondary growth forest, the density adjustment of pine trees, and the active management of competitive trees. The average basal area by the community was 12,642.1~25,424.4cm² for the tree layer and 1.8~1,956.5cm² for the low tree layer based on a quadrat of 400m². The difference in the basal area appeared to depend on the size and number of trees forming the tree layer and the degree of pine forest renewal (the degree of time elapsed after thinning pine trees). The average number of species that appeared in each community was 8.7-20.3; there were many species located in valleys, and the type competes with deciduous broadleaf trees due to the lack of management. The diversity of species ranged from 0.6915-1.0942, and was evaluated as low compared to pine communities in central temperate zones. In this paper, we determined the management goals of Geumgang Pine (Pinus densiflora) Forest in Sogwang-ri, Uljin to produce timber with high economic value, and suggested efficient vegetation management for continuous afforestation, the establishment of a timber production system, and improvement of wood production as a management direction.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.40 no.3
• /
• pp.1-9
• /
• 2022

This study compared and reviewed the recognition determinants by applying the OECMs criteria, focusing on old big trees, plant of natural monument that are natural heritage under the national heritage system of the Cultural Heritage Administration, and the results are as follows. First, among the protected areas designated and managed by government agencies according to each protection purpose, it is necessary to actively introduce new conservation measures, OECMs, to fulfill the Biodiversity strategy for 2030 while the land area is already saturated. Second, the OECMs are geographically defined areas(CBD, 2018), not currently recognized as a protected areas, governed and managed in a way that achieves positived sustained and effective contribution to in situ conservation of biodiversity. Since the selection of term, the scope of application criteria, and the context of interpretation are inevitably different, it is necessary to separately legislate and establish related laws of the OECMs suitable for each country's situation. Third, as a result of reviewing the OECMs criteria for plant of natural monument, the final 58 potential resources were recognized. Important elements among the OECMs criteria are that buffer zones should be spaced apart from designated zones to secure a certain area, and that economic activities through commercial production should not occur and meet biodiversity standards. Among the potential candidates, 23 areas were analyzed to be geographically isolated and independent, such as Forest of Oriental Arborvitae in Do-dong, Daegu, and forest types such as Carstor Aralia of Gungchon-ri, Samcheok and Forest of Common Camellias in Maryang-ri, Seocheon. As a result of reviewing the application of OECMs criteria for plant of natural monument, it was confirmed that the functions as a traditional uses were specialized among the values of biodiversity, and ecosystem services and cultural and spiritual values were inherited through Korea's unique culture of old big trees and Dangsan ritual. In terms of biodiversity criteria, it can be used as an important factor in connecting human and natural ecosystem networks without the discovery of new species.

• Women's Studies Review
• /
• v.27 no.1
• /
• pp.3-36
• /
• 2010

This paper is based on the certain point that 'the indigenous', which have long been occupied by the Asian patriarchy or the local communities, now calls for the repositioning in the feminist context. 'The indigenous', in one part, generally refer to the matured long-standing traditions and practices of certain regional, or local communities, as a mode of a place specific way of endowing the world with integral meaning. In the narrow definition, it points to the particular form of placed based knowledge for survival, for example, the useful knowledge of a population who have lived experiences of the environment. In the other part, 'the indigenous' could be criticized in the gender perspectives because it has been served as an ideological tool for patriarchy and sexism, which have undermined women's body and subjectivity in the name of the Asian traditional community. That's why the feminists with sensitivity to the discourses of it, may perceive it very differently, still hesitating dealing with the problem. However, even if there are tendencies that the conservatives romanticize local traditions and essentialize 'the indigenous', as it were, it does not exist 'out there'. Then, it could be scrutinized in the contemporary context which, especially, needs to seek the possibility towards the alternatively post - develope mental knowledge system. In the face of global economic crisis which might be resulted from the instrumentalized or fragmented knowledge production system, it's holistic conceptions that human, society, and nature should not be isolated from each other. is able to give an insightful thinking. It will work in the restraint condition that we reconceptualize the indigenous knowledge not as an unchanging artefact of a timeless culture, but as a dynamic, living and culturally meaningful system towards the ecofeminstic indigenous knowledge. And then, indigenous renaissance phenomena which empower non-western culture and knowledge system and generate increased consciousness of cultural membership. Thus, this paper argues that the indigenous knowledges which have been underestimated in the western-centered knowledge-power relations, could be reconstructed as a potential resources of ecological civility transnationally which reconnect individuals and societies with nature.

• Journal of Technology Innovation
• /
• v.31 no.3
• /
• pp.39-73
• /
• 2023

The field of Management of Technology(MOT) emerged in response to the need for research management within U.S. public research institutions during the 1960s. Since its inception, it has proliferated significantly, being practiced in more than 809 institutions globally and over 19 institutions in Korea, encompassing both research and educational endeavors. Particularly noteworthy is the substantial investment of government resources, primarily channeled through the Ministry of Industry since 2007, which has expeditiously established a comprehensive framework for cultivating graduate-level MOT expertise, marked by both quantitative and qualitative advancements. The educational curriculum in the realm of Korean MOT deviates from foreign counterparts through distinctive pathways, exemplified by its emphasis on industry practice-oriented educational programs, standardization and isomorphism across different schools, as well as its interconnectedness with proximate academic disciplines. This research systematically undertakes an analysis of the curriculum in Korean MOT graduate schools, thereby ascertaining its intrinsic identity and distinct attributes. In this endeavor, a comprehensive examination of eleven principal MOT textbooks(three in Korean and eight in English) is conducted to delineate the primary content of the curriculum across seven thematic domains. Moreover, the study deliberates on its differentiation from neighboring academic disciplines and the definitional attributes of MOT. Subsequently, this analysis also encompasses nine Korean MOT graduate programs, projecting the seven thematic domains onto their respective curricula. The findings illuminate that within the context of Korean graduate programs, a substantial proportion of the curriculum, amounting to 62.5%, is dedicated to facets encompassing the operational aspects of technology management within corporate contexts, technology management specific to varying industries and technologies, and collaborative endeavors between academia and industry in the form of projects and seminars. Evidently, the Korean approach to technology management education is notably geared towards the cultivation of adept practitioners capable of executing technology management functions at a mid-tier managerial level, aligned with the exigencies of regional industries. Grounded in the analysis of technology management curricula, this study extrapolates implications for the future trajectory of MOT education in Korea, encompassing a consideration of the stages of industrial development. It underscores the necessity to augment the educational curricula pertaining conceptual foundation of technology and innovation, strategic perspectives of technology and innovation, and the socio-economic context of technology management.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.19 no.1
• /
• pp.55-73
• /
• 2024

Unicorn companies are attracting attention around the world as they are recognized for their high corporate value in a short period of time as an innovative business models. Their growth process presents good lessons for the startup ecosystem and have a positive impact on national economic development and job creation. However, previous studies related to unicorn companies are focused on 'event studies' and 'case studies' such as characteristics of founders, environmental factors, business models and success/failure cases of companies already recognized as unicorns rather than a multifaceted approach. The occurrence of unicorn companies and Macroscopic analysis of related factors is lacking. Against this background, this study are considering the characteristics of unicorns examined through previous research and the current status unicorns with a high proportion of technology companies, the purpose was to analyze the impact of the country's technological competitiveness, such as 'technology human resource index', 'R&D index', and 'technology infrastructure index', on the increase in unicorn companies. For statistical analysis, data published by various international organizations, the Bank of Korea, and Statistics Korea from 2017 to 2020 and unicorn company data compiled by CB Insights were used as panel data for 44 countries to be tested by multiple regression analysis. As a result of the study, it was confirmed that the number of science majors had a positive (+) effect on the increase of unicorn companies in the case of technology human resource index, and in the case of R&D index, the total amount of R&D investment had a positive (+) effect on the increase of unicorn companies, while the number of Triad Patents Families and the number of scientific and technological papers published had a negative (-) effect on the increase of unicorn companies. Finally, in the case of technology infrastructure index, it was confirmed that the number of the world's 500th-ranked universities had a positive (+) effect on the increase of unicorn companies. This study is the first to reveal the causal relationship between national technological competitiveness and unicorn company growth based on country-specific and time-series empirical data, which were insufficiently covered in previous studies. and compared to the UN's ranking of the global industrial competitiveness index and the OECD's total R&D investment by country, Korea is considered to have technological and growth potential, while the number of unicorn companies driving growth as leaders of the innovative economy is relatively small, so the research results can be used when establishing policies to discover and foster unicorn companies in the future.

• Korean small business review
• /
• v.32 no.1
• /
• pp.65-87
• /
• 2010

With the advent of knowledge-based society, the revitalization of technological innovation type SMEs, termed "inno-biz" hereafter, has been globally recognized as a government policymakers' primary concern in strengthening national competitiveness, and much effort is being put into establishing polices of boosting the start-ups and innovation capability of SMEs. Especially, in that the inno-biz enables national economy to get vitalized by widening world markets with its superior technology, and thus, taking the initiative of extremely competitive world markets, its growth and development has greater significance. In the case of Korea, the government has been maintaining the policies since the late 1990s of stimulating the growth of SMEs as well as building various infrastructures to foster the start-ups of the SMEs such as venture businesses with high technology. In addition, since the enactment of "Innovation Promotion Law for SMEs" in 2001, the government has been accelerating the policies of prioritizing the growth and development of inno-biz. So, for the sound growth and development of Korean inno-biz, this paper intends to offer effective management strategies for SMEs and suggest proper policies for the government, by researching into the effect of technological innovation capability and technology commercialization capability as the primary business resources on business performance in Korean SMEs in the light of market information orientation. The research is carried out on Korean companies characterized as inno-biz. On the basis of OSLO manual and prior studies, the research categorizes their status. R&D capability, technology accumulation capability and technological innovation system are categorized into technological innovation capability; product development capability, manufacturing capability and marketing capability into technology commercialization capability; and increase in product competitiveness and merits for new technology and/or product development into business performance. Then the effect of each component on business performance is substantially analyzed. In addition, the mediation effect of technological innovation and technology commercialization capability on business performance is observed by the use of the market information orientation as a parameter. The following hypotheses are proposed. H1 : Technology innovation capability will positively influence business performance. H1-1 : R&D capability will positively influence product competitiveness. H1-2 : R&D capability will positively influence merits for new technology and/or product development into business performance. H1-3 : Technology accumulation capability will positively influence product competitiveness. H1-4 : Technology accumulation capability will positively influence merits for new technology and/or product development into business performance. H1-5 : Technological innovation system will positively influence product competitiveness. H1-6 : Technological innovation system will positively influence merits for new technology and/or product development into business performance. H2 : Technology commercializing capability will positively influence business performance. H2-1 : Product development capability will positively influence product competitiveness. H2-2 : Product development capability will positively influence merits for new technology and/or product development into business performance. H2-3 : Manufacturing capability will positively influence product competitiveness. H2-4 : Manufacturing capability will positively influence merits for new technology and/or product development into business performance. H2-5 : Marketing capability will positively influence product competitiveness. H2-6 : Marketing capability will positively influence merits for new technology and/or product development into business performance. H3 : Technology innovation capability will positively influence market information orientation. H3-1 : R&D capability will positively influence information generation. H3-2 : R&D capability will positively influence information diffusion. H3-3 : R&D capability will positively influence information response. H3-4 : Technology accumulation capability will positively influence information generation. H3-5 : Technology accumulation capability will positively influence information diffusion. H3-6 : Technology accumulation capability will positively influence information response. H3-7 : Technological innovation system will positively influence information generation. H3-8 : Technological innovation system will positively influence information diffusion. H3-9 : Technological innovation system will positively influence information response. H4 : Technology commercialization capability will positively influence market information orientation. H4-1 : Product development capability will positively influence information generation. H4-2 : Product development capability will positively influence information diffusion. H4-3 : Product development capability will positively influence information response. H4-4 : Manufacturing capability will positively influence information generation. H4-5 : Manufacturing capability will positively influence information diffusion. H4-6 : Manufacturing capability will positively influence information response. H4-7 : Marketing capability will positively influence information generation. H4-8 : Marketing capability will positively influence information diffusion. H4-9 : Marketing capability will positively influence information response. H5 : Market information orientation will positively influence business performance. H5-1 : Information generation will positively influence product competitiveness. H5-2 : Information generation will positively influence merits for new technology and/or product development into business performance. H5-3 : Information diffusion will positively influence product competitiveness. H5-4 : Information diffusion will positively influence merits for new technology and/or product development into business performance. H5-5 : Information response will positively influence product competitiveness. H5-6 : Information response will positively influence merits for new technology and/or product development into business performance. H6 : Market information orientation will mediate the relationship between technology innovation capability and business performance. H7 : Market information orientation will mediate the relationship between technology commercializing capability and business performance. The followings are the research results : First, as for the effect of technological innovation on business performance, the technology accumulation capability and technological innovating system have a positive effect on increase in product competitiveness and merits for new technology and/or product development, while R&D capability has little effect on business performance. Second, as for the effect of technology commercialization capability on business performance, the effect of manufacturing capability is relatively greater than that of merits for new technology and/or product development. Third, the mediation effect of market information orientation is identified to exist partially in information generation, information diffusion and information response. Judging from these results, the following analysis can be made : On Increase in product competitiveness, directly related to successful technology commercialization of technology, management capability including technological innovation system, manufacturing capability and marketing capability has a relatively strong effect. On merits for new technology and/or product development, on the other hand, capability in technological aspect including R&D capability, technology accumulation capability and product development capability has relatively strong effect. Besides, in the cast of market information orientation, the level of information diffusion within an organization plays and important role in new technology and/or product development. Also, for commercial success like increase in product competitiveness, the level of information response is primarily required. Accordingly, the following policies are suggested : First, as the effect of technological innovation capability and technology commercialization capability on business performance differs among SMEs; in order for SMEs to secure competitiveness, the government has to establish microscopic policies for SMEs which meet their needs and characteristics. Especially, the SMEs lacking in capital and labor are required to map out management strategies of focusing their resources primarily on their strengths. And the government needs to set up policies for SMEs, not from its macro-scaled standpoint, but from the selective and concentrative one that meets the needs and characteristics of respective SMEs. Second, systematic infrastructures are urgently required which lead technological success to commercial success. Namely, as technological merits at respective SME levels do not always guarantee commercial success, the government should make and effort to build systematic infrastructures including encouragement of M&A or technology trade, systematic support for protecting intellectual property, furtherance of business incubating and industrial clusters for strengthening academic-industrial network, and revitalization of technology financing, in order to make successful commercialization from technological success. Finally, the effort to innovate technology, R&D, for example, is essential to future national competitiveness, but its result is often prolonged. So the government needs continuous concern and funding for basic science, in order to maximize technological innovation capability. Indeed the government needs to examine continuously whether technological innovation capability or technological success leads satisfactorily to commercial success in market economic system. It is because, when the transition fails, it should be left to the government.

• The Korean Journal of Air & Space Law and Policy
• /
• v.27 no.2
• /
• pp.211-241
• /
• 2012

The Draft International Code of Conduct for Outer Space Activities officially proposed by the European Union on the occasion of the 55th Session of the United Nations Peaceful Uses of the Outer Space last June 2012 in Vienna, Austria is to fill the lacunae of the relevant norms to be applied to the human activities in the outer space and thus has the merit our attention. The missing elements of the norms span from the prohibition of an arms race, safety and security of the space objects including the measures to reduce the space debris to the exchange of information of space activities among space-faring nations. The EU's initiatives, when implemented, cover or will eventually prepare for the forum to deal with such issues of interests of the international community. The EU's initiatives begun at the end of 2008 included the unofficial contacts with major space powers including in particular the USA of which position is believed to have been reflected in the Draft with the aim to have it adopted in 2013. Although the Code is made up of soft law rather than hard law for the subscribing countries, the USA seems to be afraid of the eventuality whereby its strategic advantages in the outer space will be affected by the prohibiting norms, possibly to be pursued by the Code from its current non-binding character, of placing weapons in the outer space. It is with this trepidation that the USA has been opposing to the adoption of the United Nations Assembly Resolutions on the prevention of an arms race in the outer space (PAROS) and in the same context to the setting-up of a working group on the arms race in the outer space in the frame of the Conference on Disarmament. China and Russia who together put forward a draft Treaty on Prevention of the Placement of Weapons in Outer Space and of the Threat or Use of Force against Outer Space Objects (PPWT) in 2008 would not feel comfortable either because the EU initiatives will steal the lime light. Consequently their reactions are understandably passive towards the Draft Code while the reaction of the USA to the PPWT was a clear cut "No". With the above background, the future of the EU Code is uncertain. Nevertheless, the purpose of the Code to reduce the space debris, to allow exchange of the information on the space activities, and to protect the space objects through safety and security, all to maximize the principle of the peaceful use and exploration of the outer space is the laudable efforts on the part of EU. When the detailed negotiations will be held, some problems including the cost to be incurred by setting up an office for the clerical works could be discussed for both efficient and economic mechanism. For example, the new clerical works envisaged in the Draft Code could be discharged by the current UN OOSA (Office for Outer Space Affairs) with minimal additional resources. The EU's initiatives are another meaningful contribution following one due to it in adopting the Kyoto Protocol of 1997 to the UNFCCC (UN Framework Convention on the Climate Change) and deserve the praise from the thoughtful international community.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.21 no.4
• /
• pp.99-107
• /
• 1979

In order to investigate the utilization of industrial waste and briquette ash for concrete production, briquette ash was used as fine aggregate for mortar production and three different kinds mortars were produced by mixing carbide and bottom aches with cement. These products were compared with mortar, produced by standard sand, in the respects of compressive, tensil and bending strengths. Further study on the economic aspect of utilization of briquette ash is needed but the results obtained from our preliminary study are summarized as follows : 1. The compressive strengths at the age of seven days of mortars, made of one to two ratios of cement to briquette ash, (cement+carbide ash) to briquette ash and(cement+bottom ash) to briquette ash were 70%, 61% and 58%, respectively, of the mortar made of standard sand. The compressive strengths of those mortars at the age of 28 days were 56%, 49% and 48% of the mortar made standard sand. 2. The compressive strengths at the age of seven days of the mortar made of one to two ratios of cement to briquette ash, (cement+carbide ash) to briquette ash and (cement+bottom ash) to briquette ash were 84%, 73%, and 70% of the mortar which was produced according to Korean Standard Value. The compressive strengths of those mortars at the age of 28 days were 85%, 73% and 73% of the mortar of the Korean Standard value. 3. The tensil strengths at the age of seven days of the mortars made of one to two ratios of cement to briquette ash, (cement+carbide ash) to briquette ash, and (cement+bottom ash) to briquette ash were 64%, 36%, and 36%, respectively, of the mortar of standard sand. The tensil strengths of those mortars at the age of 28 days were 70%, 47%, and 39%, respectively, of the standard mortar. The mortars made of one to two ratios of cement to briquette ash at the age of seven and 28 days were higher than the mortars of Korean Standard. The other mortars were 61 to 62% at the age of seven days and 75 to 90% at the age of 28 days of the Korean Standard mortar, respectively. 4. The bending strengths at the age of seven days of mortar made of one to two ratios of cement to briquette ash, (cement+carbide ash) to briquette ash, and (cement+bottom ash) to briquette ash were 46%, 53% and 50% of the mortar of standard sand. The bending strengths of those mortars at the age of 28 days were 90%, 77% and 69%, respectively of the mortar of standard sand. 5. The mortar of briquette ash which was lower in strengths compared with the mortar of cement have shown possibility of its secondary products of cement and concrete. The uses of briquette ash and industrial waste as construction materials would contribute toward solving various pollution problems caused by industrial wastes and saving labor costs needed to cleaning up. Furthermore, the effective use of briquette ash would greatly save the aggregate resources.