• 한국산학기술학회논문지
• /
• 제17권7호
• /
• pp.648-655
• /
• 2016

FTA 이행이 가속화될수록 기 체결된 FTA 대상국별 농산물 양허 내용, 농산물 교역 등을 분석하여 국내 농업에 미치는 영향을 사후 평가하는 것이 중요한 과제로 등장되고 있다. 한 EU FTA는 우리나라가 체결한 거대 FTA 중 하나로, 2016년 7월에 이행 5년 차로 통상절차법에 따라 농업에 대한 사후영향평가에 대한 연구수요를 대비하는 데, 본 연구의 목적이 있다. 또한, 이러한 평가를 통해 수정 및 보완이 필요한 부분에 대한 정책방향이 제시되어야 농업계와 비농업계의 상반된 주장을 보다 객관적으로 평가할 수 있다. 현재 일반적인 기 체결 FTA에 대한 사후 경제적 영향평가는 발효시점을 기준으로 전후를 비교하여 무역수지가 변화하였는가를 평가하는 것이나, 이는 순수한 FTA 효과라 할 수 없으며, 환율, 국제거시지표의 변화, 수출입국의 기상이변 및 병해충 발생 등 수급변화가 모두 혼재한 상황으로 객관적인 기 체결 FTA에 대한 경제적 영향 평가를 할 수 없었다. 그러나 이번 연구로 시도된 동태적 사후영향평가방법으로 한 EU 발효 후 4년간의 전체 농업GDP 누적 감소액은 2,178억 원으로 계측되었다. 가장 큰 영향을 받은 품목은 돼지를 중심으로 축산물이고, 그 다음으로 곡물, 채소 순으로 분석되었다. 또한 이번 연구로 시도된 동태적 사후영향평가방법론으로 향후 진행될 사후정책평가연구에 기여를 할 것으로 기대한다.

• 한국태양에너지학회 논문집
• /
• 제27권3호
• /
• pp.175-179
• /
• 2007

This experimental demonstration has successfully shown that it is possible to use direct sunlight for the illumination of deeper building zones using the material for light path system(light duct). Three kinds of reflectors which were 95% Silver vaporizing fixed, 85% Anodized and 85% Hot melted applied to evaluate and compare their performances each others. Also, these three kind of reflectors were compared in view point of economics. The most high performance was obtained in 95% Silver vaporizing fixed reflector hater than another reflectors of 85% Anodized reflector and 85% Hot melted reflector even though more high production cost in 95% Silver vaporizing fixed reflector. The rest two reflectors of 85% Anodized and 85% Hot melted $10{sim}15%$ less performance than 95% Silver vaporizing fixed reflector but their production cost were low than the production cost of 95% Silver vaporizing fixed reflector which identified very weak and light yellow color in the light.

• 대한기계학회논문집B
• /
• 제27권10호
• /
• pp.1457-1463
• /
• 2003

In this paper, the response surface method using three-dimensional Navier-Stokes analysis to optimize the shape of a multi-blade centrifugal fan, is described. For numerical analysis, Reynolds-averaged Navier-Stokes equations with standard k - c turbulence model are transformed into non-orthogonal curvilinear coordinate system, and are discretized with finite volume approximations. Due to the large number of blades in this centrifugal fan, the flow inside of the fan is regarded as steady flow by introducing the impeller force models for economic calculations. Linear Upwind Differencing Scheme(LUDS) is used to approximate the convection terms in the governing equations. SIMPLEC algorithm is used as a velocity-pressure correction procedure. Design variables, location of cur off, radius of cut off, expansion angle of scroll and width of impeller were selected to optimize the shapes of scroll and blades. Data points for response evaluations were selected by D-optimal design, and linear programming method was used for the optimization on the response surface. As a main result of the optimization, the efficiency was successfully improved. It was found that the optimization process provides reliable design of this kind of fans with reasonable computing time.

• 한국항해항만학회지
• /
• 제39권5호
• /
• pp.423-429
• /
• 2015

The expansion on the scale of international trade and rapid economic growth in Northeast Asia have caused intense competition among global companies for securing international logistics center in Northeast Asia. Analyzing location competitiveness for international logistics center in Northeast Asia, this paper aims to extract implications for enhancing locational competitiveness. Employing the relative importance among location selection factors extracted from AHP analysis in prior study, we evaluated the major five port-cities in Northeast Asia including Busan, Gwangyang, Shanghai, Qingdao and Tokyo. In the evaluations, Shanghai (3.926) ranked as the first, followed by Busan (3.859), Qingdao (3.555), Tokyo (3.013) and Gwangyang (2.915). Furthermore, the causal relationships between determinants for location choice decision (logistics factor, cost factor, market factor, service factor and environmental factor) and dependent variables (competitiveness of international logistics center, potentiality to growth, present intention to move into and future plan to move into) were analyzed to provide implications. Results provide useful insights for further improvements, and helps strategic agenda for future development of port-cities.

• 한국산림과학회지
• /
• 제84권4호
• /
• pp.456-464
• /
• 1995

본 연구는 산림 휴양객의 휴양경험에서 얻는 사회 심리적 이익을 규명하고 수량화 하며 또한 산림 휴양지의 각 속성들이 이들 휴양경험과 어떠한 관계를 갖는가를 알아보기 위하여 수행되었다. 426명의 월악산 국립공원 방문객을 대상으로 직접 설문에 의하여 1995년 5월과 6월에 거쳐 자료가 수집되었다. 자료의 분석결과 9개의 자원 속성과 12개의 사회 심리적 휴양이익이 규명되었다. 또한 이들 자원 속성 변수와 휴양 이익간에는 큰 연관 관계를 가지고 있었다. 본 연구에서 얻은 결과는 휴양자원의 설계 및 관리에 큰 도움을 가져올 것으로 사료되며 특히 휴양자원의 목록화, 관리 기법의 선택, 그리고 휴양자원의 가치 평가에 있어서 통합된 개념으로서의 가치를 인식하는데 큰 역할을 할 것이다.

• 응용통계연구
• /
• 제20권2호
• /
• pp.229-244
• /
• 2007

국내외에서 소지역 추정에 관한 많은 연구가 진행되고 있다. 보조 자료가 충분히 있는 경우 모형기반 추정법을 사용하는 것이 일반적이며 이 중에서 계층적 베이지안(Hierarchical Bayesian: HB) 추정법이 가장 좋은 것으로 알려져 있다. 그러나 보조 자료가 충분하지 않은 경우에는 모형 기반 추정법의 사용은 제한적이다. 최근 충분한 보조 자료가 없는 경우 공간 정보를 보조 자료로 사용하는 방법이 제안되었다. 본 논문에서는 공간통계량과 베이즈 접근방법을 활용한 모형기반의 소지역 통계량들을 모형 검진방법(Diagnostic method)들을 이용하여 비교 분석하였다. 분석에 사용된 자료는 2005년도 경제활동인구 조사이며 소지역(시,군,구)통계를 추정하여 비교하였다.

• 한국유체기계학회 논문집
• /
• 제7권3호
• /
• pp.32-38
• /
• 2004

Shape of a multi-blades centrifugal fan is optimized by response surface method based on three-dimensional Navier-Stokes analysis. For numerical analysis, Reynolds-averaged Navier-Stokes equations with standard $k-{epsilon}$ turbulence model are transformed into non-orthogonal curvilinear coordinate system, and are discretized with finite volume approximations. Due to the large number of blades in this centrifugal fan, the flow inside of the fan is regarded as steady flow by introducing the impeller force models for economic calculations. Optimizations with and without constraints are carried out. Design variables, location of cur off, radius of cut off, expansion angle of scroll and width of impeller were selected to optimize the shapes of scroll and blades. Data points for response evaluations were selected by D-optimal design, and linear programming method was used for the optimization on the response surface. As a main result of the optimization, the efficiency was successfully improved. The correlation of efficiency with relative size of inactive zone at the exit of impeller is discussed as well as with average momentum fluxes in the scroll.

• 대한인간공학회지
• /
• 제16권3호
• /
• pp.49-60
• /
• 1997

Although the tasks are being mechanized or automated today, many tasks are still performed manually in several industrial settings. Manual materials handling and improper sorking postures are known to be a major cause of low back injuries, which are one of the major problems in the economic and public health aspects. In this study, two machine repair shops of a manufacturing company in Pohang were recommended by the company health care center to investigate the potential risk factors that may cause low back injuries. Five machine repair tasks were selected from each machine repair shop, which are accountable for relatively high complaints of low back pain. The purpose of this study is to quantitatively evaluate the hazards of the tasks, and finally to recommend the improved methods and guidelines for safe work practices. In order to accomplish this goal, the questionnaire study and ergonomic evaluations were carried out and the results were analyzed. For most of the tasks under study, workers were found to be exposed to relatively high biomechanical stresses in low back, mainly due to the heaby objects handled and the improper working postures.

• International Journal of Contents
• /
• 제10권1호
• /
• pp.47-53
• /
• 2014

The paper considers the challenges involved in measuring the similarities between time series, such as time shifts and the mixture of frequencies. To improve recognition accuracy, we investigate an improved linear dynamical system for discovering prominent features by exploiting the evolving dynamics and correlations in a time series, as the quality of unsupervised pattern recognition relies strongly on the extracted features. The proposed approach yields a set of compact extracted features that boosts the accuracy and reliability of clustering for time series data. Experimental evaluations are carried out on time series applications from the scientific, socio-economic, and business domains. The results show that our method exhibits improved clustering performance compared to conventional methods. In addition, the computation time of the proposed approach increases linearly with the length of the time series.

• 한국환경과학회지
• /
• 제23권6호
• /
• pp.1111-1120
• /
• 2014

Ulsan made its contributions to modern Korea as an industrial city. In the 1960s, Ulsan was appointed as a special industrial zone. After that, industrial complexes were built without environmental considerations so Ulsan was once called "the polluted city". However, in the early 2000s, the main concern of Ulsan's policies was gradually shifted from the economic growth to the environmental issues. In order to enhance the environmental quality and to make the Ulsan more environmentally friendly eco-city where human and nature coexist, Ulsan city declared "The Eco-polis Ulsan" in 2004 based on "The Master Plan for Eco-polis Ulsan" which included the eco-industrial park as an action plan. This study aims at defining the concepts of eco-city and policies to build Ulsan-style eco-city as environmentally friendly city and proposing Ulsan as a role model to cities and towns of developing countries. In addition, Ulsan's EIP project which will be implemented for 15 years from 2005, is elaborated including regulatory issues and technologies to be applied.