• Journal of Sensor Science and Technology
• /
• v.31 no.6
• /
• pp.361-365
• /
• 2022

Advanced packaging demands are driven by the need for dense integration systems. Consequently, stacked packaging technology has been proposed instead of reducing the ultra-fine patterns to secure economic feasibility. This study proposed an effective packaging process technology for semiconductor devices using a 9-inch dicing die attach film (DDAF), wherein the die attach and dicing films were combined. The process involved three steps: tape lamination, dicing, and bonding. Following the grinding of a silicon wafer, the tape lamination process was conducted, and the DDAF was arranged. Subsequently, a silicon wafer attached to the DDAF was separated into dies employing a blade dicing process with a two-step cut. Thereafter, one separated die was bonded with the other die as a substrate at 130 ℃ for 2 s under a pressure of 2 kgf and the chip was hardened at 120 ℃ for 30 min under a pressure of 10 kPa to remove air bubbles within the DAF. Finally, a curing process was conducted at 175 ℃ for 2 h at atmospheric pressure. Upon completing the manufacturing processes, external inspections, cross-sectional analyses, and thermal stability evaluations were conducted to confirm the optimality of the proposed technology for application of the DDAF. In particular, the shear strength test was evaluated to obtain an average of 9,905 Pa from 17 samples. Consequently, a 3D integration packaging process using DDAF is expected to be utilized as an advanced packaging technology with high reliability.

• Korean Journal of Materials Research
• /
• v.32 no.10
• /
• pp.429-434
• /
• 2022

There is ongoing research to develop lithium ion batteries as sustainable energy sources. Because of safety problems, solid state batteries, where electrolytes are replaced with solids, are attracting attention. Sulfide electrolytes, with a high ion conductivity of 10^-3 S/cm or more, have the highest potential performance, but the price of the main materials is high. This study investigated lithium hydride materials, which offer economic advantages and low density. To analyze the change in ion conductivity in polymer electrolyte composites, PVDF, a representative polymer substance was used at a certain mass ratio. XRD, SEM, and BET were performed for metallurgical analyses of the materials, and ion conductivity was calculated through the EIS method. In addition, thermal conductivity was measured to analyze thermal stability, which is a major parameter of lithium ion batteries. As a result, the ion conductivity of LiH was found to be 10^-6 S/cm, and the ion conductivity further decreased as the PVDF ratio increased when the composite was formed.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.1189-1194
• /
• 2009

A gutter-shaped U grating is a facility that is installed at the sides of a road to provide pedestrians with a rainwater-free road. The previous studies on this facility focused mainly on the progress of the efforts that are being made to improve its performance and interception efficiency so as to prevent damages in regional areas due to the heavy rains caused by climate change. The studies on its maintenance, however, are still inadequate. Therefore, this study was conducted to analyze and compare the life cycle costs and performance evaluations of the steel and magic gratings, which are installed in apartments. The results of the study show that the replacement period and rate of gratings differ depending on where they are installed. The initial capital investment cost of a magic grating installed at a road where many vehicles pass is quite high, but in terms of its maintenance and entire-life-cycle costs, its total expenses are lower than those of a steel grating. The results of this study are expected to serve as preliminary data for the selection of an adequate grating that is suitable for particular places in the design phase of construction projects.

• Steel and Composite Structures
• /
• v.45 no.1
• /
• pp.1-21
• /
• 2022

In the structural analysis of steel frames, joints are generally considered as rigid or hinged considering their moment transfer ability. However, the first studies conducted with the beginning of the 20th century showed that the joints do not actually fit these two definitions. In reality, a joint behaves between these two extreme points and is called semi-rigid. Including the actual state of the joint in the structural analysis provides significant economic advantages, so the subject is an intense field of study today. However, it does not find enough application area in practice. For this reason, a large-scale literature published from the first studies on the subject to the present has been examined within the scope of the study. Three important points have been identified in order to examine a joint realistically; modelling the load-displacement relationship, performing the structural analysis and how to design. Joint modelling methods were grouped under 7 main headings as analytical, empirical, mechanical, numerical, informational, hybrid and experimental. In addition to the moment-rotation, other important external load effects like axial force, shear and torsion were considered. Various evaluations were made to expand the practical application area of semi-rigid connections by examining analysis methods and design approaches. Dynamic behaviour was also included in the study, and besides column-beam connections, other important connection types such as beam-beam, column-beam-cross, base connection were also examined in this paper.

• Korean Chemical Engineering Research
• /
• v.47 no.6
• /
• pp.781-787
• /
• 2009

This report investigates the economic proprieties of commercial 50,000 barrel per day direct/indirect coal liquefaction(DCL/ICL) plants to produce commercial-grade diesel and naphtha liquids. The scope of the study includes capital and operating cost estimates, sensitivity analyses and a comparative financial analyses. Based on plant capacity of 50,000BPD, employing Illinois #6 bituminous coal as feed coal, the total capital cost appeared $3,994,858,000(DCL) and $4,962,263,000(ICL). Also, the internal rate of return of DCL/ICL appeared 13.27% and 12.68% on the base condition respectively. In this case, coal price and sale price of products were the most influence factors. And ICL's payback period(6.8 years) was longer than DCL's(6.6 years). According to sensitivity analyses, the important factors on both DCL/ICL processes were product sale price, feed coal price and the capital cost in order.

• Management & Information Systems Review
• /
• v.32 no.3
• /
• pp.25-41
• /
• 2013

This study was designed to suggest the effective CSR strategies for MNCs operating in Chinese market. For this purpose, it compares the multi-years results for the evaluation on CSR activities of Multinational and Chinese firms. It also conducts questionnaire survey in an attempt at developing measures of Chinese publics' perception on the four dimensions of CSR defined by Research Center of Chinese Academy of Social Sciences - responsibility management, economic responsibility, social responsibility, and environmental responsibility. The findings of empirical analyses indicate that the CSR activities of MNCs much fall in all four dimensions compared with them of Chinese firms. Among four dimensions, MNCs have had bad evaluations especially on economic responsibility and social responsibility that are considered more important than the others to Chinese. Those findings imply that the MNCs has so far failed to implement effective CSR activities in China. In order to offset their liabilities of foreignness and compensate for their disadvantages in the lack of governmental supports, MNCs should intensify the CSR in economic and social responsibilities.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.10
• /
• pp.493-502
• /
• 2019

Recently, the installation of renewable energy including PV systems in distribution systems has increased energetically to cope with climate change and energy shortages according to the government's policy of renewable energy 3020. On the other hand, the electrical performance and lifespan of PV modules installed outdoors can be decreased considerably due to a range of deterioration phenomena depending on the ambient environmental factors. To overcome these problems, replacement of degraded PV modules with new ones is increased before the lifespan guaranteed by the makers of PV modules. Therefore, this paper proposes a disposal diagnosis algorithm to evaluate the time interval of the optimal replacement for PV modules according to performance degradation rate of PV modules. In addition, this study modeled an economic evaluation, which is composed of the cost and benefit of PV systems. From the simulation results based on the proposed modeling and algorithm to consider the performance degradation rate specifically, the replacement approach was found to have the best B/C ratio in 10th year with a 3[%] degradation rate and the disposal diagnosis algorithm of PV modules are useful and practical tools for economic evaluations of the replacement of PV modules.

• The Journal of Health Technology Assessment
• /
• v.6 no.2
• /
• pp.148-155
• /
• 2018

Objectives: Rotavirus is one of the main causes of severe diarrhea in children under five. Two types of rotavirus vaccines [$Rotarix^{(R)}$ (RV1) and $Rotateq^{(R)}$ (RV5)] have been introduced and its administration was optional in South Korea. A systematic review (SR) on economic evaluation (EE) of RV was conducted to examine whether the introduction of rotavirus vaccine to national vaccine program (NIP) is cost-effective. Methods: Previous SR studies of EE for RV were searched in August 2017 through databases such as MEDLINE and EMBASE. Additional search was performed to include literatures published after or unincluded in the previous SR studies. Among the 11 SR studies identified, 2 studies were reviewed via inclusion/exclusion criteria. A previous SR study including 104 original articles was selected by A MeaSurement Tool to Assess systematic Reviews. Among the 36 original articles identified through additional search, 10 were selected, resulting in 114 studies included in our analysis. Results: RV1-only, RV5-only, and evaluating-both studies account for about 44%, 22%, and 33%, respectively. Among RV1-only, RV5-only, or evaluating-both studies, 90%, 64%, or 68% of the studies concluded RV as being cost-effective, respectively. RV5-only studies were usually executed in high-income countries (68%), whereas RV1-only studies were executed mostly in lower (32%) and upper (26%) middle-income countries. When classifying studies by their funding sources, RV1-only studies (82%; 28 of 34 studies specifying funding sources) were chiefly supported by non-profit organization, and 100% of these studies were concluded as being cost-effective. RV5-only studies were mostly supported by profit organization (68%; 13 of 19 studies specifying sources), and 92% of these studies concluded as being cost-effective. Conclusion: By reviewing global EE studies for RV, we have learned that about 70% of these studies was shown to be cost-effective and RV1 appeared to be more cost-effective than RV5.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.279-290
• /
• 2021

This study evaluated the economic feasibility of facility farms according to the introduction of the ultra-high density pot cultivation (UHDPC) for mango. The basic model was selected as a representative farmhouse case in the Jeonnam region, and seven scenarios for conventional crops were tested. The economic feasibility of crop switching was analyzed through partial budget analysis (PBA). The PBA analysis results were supplemented by adding a sensitivity analysis and a break-even point (BEP) analysis. As a result of the analyses, it was found that crop conversion was economical because the increase in the profit coefficient was greater than the increase in the loss coefficient due to the introduction of mango for all conventional crops. The economics of introducing mango was more sensitive to changes in gross income than to changes in cost items. The results show the detailed conditions of crop selection according to the conditions and preferences of individual farms by presenting the direction of increase and decrease by budget item and information on the amount of increase or decrease. In particular, the BEP analysis result, which is about half of the farms case, is significant in that it presents the minimum target value according to production and market risks.

• Journal of the Korean association of regional geographers
• /
• v.23 no.3
• /
• pp.437-449
• /
• 2017

As a new duty of universities, contributions to localities and regions are magnified as an important issue and overseas universities are creating it as the index to use self evaluations and public relations actively. The universities in Korea are expanding resources usage of university and proceeding various businesses to enhance co-operation with local government, civic groups and companies lately. However, it is still in an embryo. This study is aiming to analyze cases of foreign universities and the socio-economic impacts of university on the region and discover evaluation index based on the results to be applied to the universities in Korea. This study had considered the evaluation of local effect by the university conducted by the Higher Education Funding Council for England(HEFCE) which is the representative case to analyze the impacts of university on the region at the level of government and independent organizations. The applicable common index had been extracted for universities in Korea from case studies on University of Rochester in the US and University of Birmingham in the UK considered as a representative university in North America and Europe respectively which are publishing a white paper on local and regional impacts of the university by using various index. As a result, 24 items in six areas(economic influence, research, education, art & cultural services, regional development, and the field of university specialization) had been deducted as the evaluation index which represents the local and regional impacts of university. This index could be secured through holding materials of each university and 'Higher Education in KOREA' as university information disclosure service and it might be applied to the universities in Korea.