• Magazine of the Korean Society of Agricultural Engineers
• /
• v.28 no.2
• /
• pp.63-73
• /
• 1986

The model was developed by applying the principles of Bacot and Vidal to measure the behavior of deformation of the reinforced earth wall, and various tasts were performed by using the plastic fabric filter and the galvanized steel plate as a strip. The results obtained are as follows; 1. When the reinforced earth wall is deformed by the load, the strip is completely reinforced by the backfill materials and changed to the rigid block state, under the state of failure which permits sliding only, the next theoretical equation is formed. (H/L) . tan$\theta$ [cosO-sinOtanO] =2sinO[tan($\theta$ +0) +tanO] 2.The degree of the mutual reinforcement of the backfill material and the strip depend on the physical characteristics of the each material especially the angle of shearing resistance of the backfill material is desirable over 20$^{\circ}$ and, if it is over 400, its function could be a maximum. 3.The distribution of the maximum tensile strain of the reinforcement is changing with the height of reinforced earth wall, and when the height from bottom of the reinforced earth wall is 1.85 to 3. 35m, the maximum tensile strain appears at 2m from the skin element. The maximum tensile strain is increased by the depth of the reinforced earth wall from surface, and increased with the lapse of time after construction. 4.The failure surface of the reinforced earth wall by the concrete skin was about 60$^{\circ}$and the failure behavior of the reinforced earth wall in which the fabric filter was buried was slow, and so the pore pressure could be decreased. 5.It is possible to construct the fabric retained earth wall by the plastic fabric filter only. And the reinforcing effect between the steel plate and the plastic fabric filter is not largely different. however, in the aspect of the economic durability, the plastic fabric filter is more advantageous. 6.The reinforcing action mainly depends on the width and the length of the reinforcing materials, if possible, the full width is advantageous to enlarge the contact area with backfill. but considering the economic aspect, it is neccessary to develop the method controlling the space of the strip.

• Economic and Environmental Geology
• /
• v.29 no.5
• /
• pp.575-587
• /
• 1996

The purpose of this study is to develop geostatistical methods for selection of prospective areas of polymetallic nodule deposits in KODOS (Korea Deep Ocean Study) area of the North-East Pacific Ocean. In this study $110{\times}165$ grid system was used, and each node represents the center of an estimated block of $1km{\times}1km$. The ordinary kriging was applied to SeaBeam2000 data in order to evaluate the bathymetry. A structural analysis (variogram) of the bathymetry data was carried out for constructing digital terrain model (DTM) and the maximum slopes of the bathymetry were calculated by DTM data. The above method can be used to solve the problem that is resulted from the lack of theory of a change of support model for the maximum slope of the bathymetry. The ordinary kriging and the indicator kriging were used to evaluate the nodule abundance, and the different two kriging methods were compared to evaluate the accuracy for the estimation of the nodule abundance. It has been shown that indicator kriging was better estimation tool than the ordinary kriging. The overlay map is presented for the selection of potentially minable sites by combining the two indicator maps of the nodule abundance and the maximum slope of bathymetry. This overlay map could be utilized to establish follow-up survey and to investigate the potentially minable sites in the KODOS area.

• Economic and Environmental Geology
• /
• v.37 no.5
• /
• pp.543-554
• /
• 2004

Analysis of multi-channel seismic reflection and well data serves to detail the structural evolution of the northern Okinawa Trough, southern offshore Korea. The overall structural style of the area is characterized by a series of half grabens and tilted fault blocks bounded by basement-involved listric normal faults. Most half grabens and tilted fault blocks developed in the direction of NNE-SSW, parallel to the axis of the Okinawa Trough. Orientation and distribution of the listric faults also suggest the development of transfer faults in NW-SE direction. The rifting phase of the northern Okinawa Trough have been established on the basis of structural and stratigraphic analyses of depositional sequences and their seismic expressions. Major phase of rifting probably started in the Late Miocene and the most active rifting occurred during the Early Pliocene. The rifting produced a series of half grabens and tilted fault blocks bounded by listric normal faults. It appears that the rifting activity has become weaker since the Late Pliocene, but the Pleistocene sediments faulted by listric faults bounding tilted fault blocks suggest that the rifting activity is probably still in progress.

• Journal of Technology Innovation
• /
• v.20 no.2
• /
• pp.135-159
• /
• 2012

To the analysis and discussion whether to conceptualization between the basis and LCM(Life cycle management) of patentability decisions and evergreening through research on patent application strategies and litigation cases. The Stakeholders have said that the LCM and evergreening strategies are an innovative effort to develop new pharmaceuticals, while others say that it is an effort to block generic pharmaceuticals from entering the market and permanently dominate the market by generic pharmaceuticals manufacturers or health economic perspectives. To achieve the goal of research, to discuss for conceptualization LCM and Evergreening strategies through patent application strategies for 14 pharmaceuticals for APIs and case studies for litigations. As a results, the LCM is getting patent rights for the results of research at the initial R&D stage and as such this shall be regarded as part of an effort for technology innovation. However, Evergreening is granting patent rights for the results by making high permission barrier to prevent the market entry of generic pharmaceuticals in the late development period during the pharmaceuticals development process or after their launch. This may lead to the problem of getting weak in health economic aspects and consumer welfare aspects by lowering the market accessibility of cheap generic pharmaceuticals.

• Economic and Environmental Geology
• /
• v.36 no.6
• /
• pp.491-499
• /
• 2003

The Okinawa Trough is a rift basin formed by extension. Analysis of multichannel seismic reflection profiles from the northwestern margin of the northern Okinawa Trough reveal that the trough is characterized by a series of tilted fault blocks bounded by listric normal faults and half-grabens developed between blocks, showing typical rifted structures. The trough display three kinds of sedimentary sequences with different seismic reflection characteristics: prerift, synrift and postrift sediments. The prerift sequence develops parallel to the dip direction of tilted fault blocks. The synrift sediments, mostly deposited in the half-grabens between tilted fault blocks, are generally well characterized by divergence of the reflectors towards the blocks indicating contemporaneous deposition during tilting. The postrift sediments are featured by continuous and parallel reflectors. The width of the half-graben and the throw-displacement rate of the basin bounding fault are closely connected. The throw-displacement rate is the maximum when the rifting event is the most active and the width of the half-graben is proportional to the rate.

• Design & Manufacturing
• /
• v.10 no.1
• /
• pp.41-45
• /
• 2016

Electrical equipment in factories, buildings, etc. with the development of the industry has become a large capacity. By the development, electric load also become diversified and there is also highly functional requirements being electrical equipment. Particularly in the small and medium-sized circuit breakers, tend to preferentially consider the economy stands out and improvements in safety, ease of mounting and connection through the modularity of the basic dimensions compact and cost to block expansion of the scope of the development of capacity, etc. The product having a competitive has been strongly required. In order to implement the circuit breakers of breaking capacity and compact at the same time taking into account the economic development of this technology applied to the current-limiting mechanism is essential budget or the current limiting mechanism is currently available mechanisms applicable to small and medium-sized frame (frame) can not do it. In this paper, at the same time satisfying the economic efficiency, by minimizing the load force of the moving contactor (moving contactor) to be applied to small and medium frame other hand to secure the economical efficiency without using high speed contact parting acceleration of the moving contactor conventional current-limiting mechanism, and to develop a current-limiting mechanism that can be satisfied with the same or higher performance to meet the needs of the market.

• The Journal of Engineering Geology
• /
• v.5 no.2
• /
• pp.167-179
• /
• 1995

The only three elements such as RQD, N -value and Es were used as a quantitative standard for the design of supporr pattern determidetion on subway line 8th in Seoul. Because the support pattern that was obtained by these elements could not he determined on the basis of the quantitative of geology and the orientations and properties of discontinuity planes, there have been some problems in determining the economic support pattern and tunnel stability. Therefore, in an attempt to determine the stable and economic support pattern with more quantitative elements, more flerrible rock mass classification with geologic conditions was performed by using RMR at 1745 sections and Q-system at 374 sections within Seongnam block on subway line 8th. Then, rusults by these two methods were compared with standard support pattern of the subway line 8th. Moreover, relationships between geology, geologic structures and topography to rock mass grades were studied. According to the rusult of this study, it is judged that the standard support pattern designed with PD-4 or PS - 4 should have been subdivided into 4~6 support patterns. Some sections where geologic structures such as faults and joints are developed tend to have rock mass grades. And they also have low rock mass grades near valley. On thr other hand, they show intermediate grades at piedmont area and the greatest ones at high mountains.

• Economic and Environmental Geology
• /
• v.29 no.6
• /
• pp.753-765
• /
• 1996

It is a well known fact that the remanent magnetization direction of the Tertiary rocks is deflected significantly clockwise (about $50^{\circ}$) in the Tertiary basins of the southeastern part of Korean peninsula. This fact has been interpreted as an evidence of north-south spreading of the East Sea (Sea of Japan) and dextral strike-slip motion of the Yangsan fault. As deflection (rotation) of remanent magnetizations is frequently reported from various regions of the world in the vicinities of strike-slip fault, such phenomena are to be expected in the Yangsan fault region also. It was the purpose of this study to clarify whether such premise is right or not. A total of 445 independently oriented core samples were collected from Cretaceous rocks of various lithology (sedimentary rocks, andesites and I-type granites) in the Yangsan fault area. In spite of through AF and thermal demagnetization experiments, no sign of remanent magnetization deflection was found. Instead, palaeomagnetic poles calculated from formation-mean ChRM directions are very similar to those of contemporary (Barremian, and late Cretaceous-Tertiary) sedimentary and plutonic rocks in the other parts of $Ky{\check{o}}ngsang$ basin as well as those of China. Therefore, possibility of tilting of granite plutons and horizontal block rotation of study area is excluded. It is also concluded that the Yangsan fault did not take any significant role in the Cenozoic tectonic evolution of southeast Korea and the East Sea region. The boundary between rotated and unrotated region of remanent magnetization is not the Yangsan fault line, but must lie further east of it.

• The Korean Journal of Food & Health Convergence
• /
• v.6 no.2
• /
• pp.17-21
• /
• 2020

The response of honeybee (Apis mellifera L.) pollination on canola yield with reference to most suitable number of bee hive need per unit area of crops in order to meet optimum pollination needs and better economic yields by comparing number of hives and yield components an experiment was conducted at Beekeeping and Hill Fruit Pests Research, Station Rawalpindi during 2017-18 in complete randomized block design with two sets of four treatments for comparison: 1 hive acre^-1, 2 hives acre^-1, 3 hives acre^-1 and 0 hive acre^-1. The hives were kept inside the experimental area. Parameters were assessed: pollination density, pollinator's diversity, agronomic and economic yield. In case of pollination density, the cumulative mean abundance bee species revealed that at 1200 hours, Apis mellifera was the most abundant and frequent visitor with a mean population of 8.69 bees/plant followed by A. dorsata (0.72), Syrphid fly (0.2) and other pollinators. Minimum bee population was observed during 1400 hours, mainly due to the closure of flowers and partially due to high temperature (>35℃). Pollinator diversity revealed that A. mellifera was the most dominant pollinator of Brassica crop with highest abundance (71%). A. dosata ranked 2^nd (16%) followed by A. florea (6%) respectively.

• Journal of Animal Science and Technology
• /
• v.63 no.5
• /
• pp.1098-1113
• /
• 2021

Maturation process of alfalfa (Medicago sativa L.) could be prevented by the reduction of lignin content in terms of conventional breeding or transgenic technology. Alfalfa could exhibit higher leaf/stem ratio, with a concern of yield loss. The objective of this study was to compare forage yield and nutritive value of low lignin alfalfa and two reference varieties subjecting to two harvest intervals and three seeding rates. The experimental design was a randomized complete block in a split-split plot arrangement with four replicates, where harvest intervals (28-day and 35-day) were assigned to whole plots, seeding rates were subplots, and varieties were sub-subplots. The weighted mean nutritive value was applied to two production years of 2016 and 2017. Hi-Gest 360 (low lignin alfalfa) provided similar yield potential and increased nutritive value compared to two reference varieties. Over a two-year production period, alfalfa harvested at every 28-day interval provided more economic returns than those at 35-day interval. For the seeding year and first production year, five cuts made by the 28-day interval produced more yield than four cuts by the 35-day interval. Due to limited rainfall in May 2017, a sharp drop of the first cutting overturned the advantage of the five-cut system. Shorter intervals between harvests generally increased crude protein (CP) concentrations. The differences of relative feed value (RFV) between two harvest intervals tended to be great during the first and second cuttings. Overall, harvest interval had a large effect on nutritive value and a more significant effect on alfalfa dry matter yield than variety selection. Seeding rate did not affect alfalfa yield and nutritive value.