• 자원리싸이클링
• /
• 제30권1호
• /
• pp.83-91
• /
• 2021

조강 생산 시 발생되는 슬래그는 대부분 서냉 방식에 의해 처리되고 있다. 하지만 슬래그 중 일부는 속경성 광물을 포함하고 있음에도 불구하고, 서냉 방식에 의해 그 반응성을 상실하게 된다. 이에 본 연구에서는 제강환원슬래그를 SAT공법에 의하여 공기 급냉하여 선별 및 분급 후 분쇄한 CAC의 활용성 확대를 목적으로 석고 종류 및 혼입율에 따른 CAC의 특성에 관하여 고찰하였다. 그 결과, CAC는 3시간에서는 석고 용해도, 1일 이후에는 석고 함량비에 따라 특성이 나타나는 것을 확인하였다. 반수, 무수석고의 적정 혼입율은 30% 이내, 이수석고는 35% 이상인 것을 확인하였으며, 이수석고의 혼입율 및 특성 확인을 통하여 부산이수석고의 적용 가능성을 확인하였다.

• 산업경영시스템학회지
• /
• 제42권1호
• /
• pp.115-128
• /
• 2019

Small and Medium-sized Enterprises (SMEs) are being faced with rapid changes in their business environments due to evolution of technologies and innovation in societal eco-systems. Particularly, dynamic interactions between such environments and enterprise activities have become significant, so technology planning, which is a process of identifying appropriate directions regarding product and technology development, has received much attention to cope with such dynamics proactively. However, SMEs typically have limits in performing independent, strategical and systematical technology planning activities due to the lack of human, material and financial resources. This paper proposes the development of a product roadmapping method so that SMEs carry out efficient technology planning activities with interconnections of external business environments. The present work provides product roadmap templates that directly accommodate the influence of business environments on the product's system and its associated super/sub-systems with the use of external environment analysis techniques including TRIZ methodology, PEST and 5Forces analysis. These templates are useful to efficiently forecast the directions of product's development and evolution, which arise from changes in external environments. Consequently, the present work enables SMEs to flexibly cope with the era of the next R&D generation, which pursues value creation through mutual interconnection between business environments and technology development.

• 농업과학연구
• /
• 제46권1호
• /
• pp.93-102
• /
• 2019

The materials of artificial soils in the production process of container seedlings have a great influence on plant growth. Peat moss, vermiculite, and perlite have been used as major components of artificial soils for many years; however, they could decrease carbon fixation carried out by the soil and cause environmental problems such as a change in the water quality. Thus, environmental friendly materials to replace them must be developed. The purpose of this study was to verify the optimum additive materials of artificial soils and their mixed ratios for the growth and seedling quality index (SQI) of Quercus serrata. Rice husk, mushroom sawdust, and pine bark were each used as an additive material and mixed into the growth medium at 10% and 20% of the total volume. There was no significant difference in the height growth of Q. serrata. The 20% mushroom sawdust decreased the root collar diameter by 23.4% compared to the control. The total dry weight was highest with the 10% rice husk and was significantly lower by 10.3% for the 20% mushroom sawdust compared to the control. Additionally, the SQI for all the treatments showed no tendency to increase compared with the control. Thus, this study showed the possibility of recycling biomaterials from agriculture and forest for seedling production. This method could reduce environmental problems and help eco-friendly nurseries to achieve a carbon negative impact by the recycling of by-products.

• 디지털융복합연구
• /
• 제16권11호
• /
• pp.471-476
• /
• 2018

이 논문은 한 가정에서 나타난 가족관계의 형성과 분열과정의 원인과 결과, 관계회복에 대한 의미를 파악하는 데 목적을 두고 있다. 분석 작품으로는 2018년 상반기 가장 높은 시청률을 보인 드라마<황금빛 내 인생>을 선정하였다. 연구방법은 이 드라마에서 나타난 한 가정을 중심으로 베이비부머세대와 에코부머세대, 그 이후 세대를 통해 분석하였다. 그 결과로는 가족관계에 대한 세대 간의 부담과 갈등, 그리고 책임감은 가부장적인 일방적인 관계였다. 이러한 관계는 부담감으로 얽혀있는 관계를 끊어버리고 해체하였다. 가족 간의 관계단절은 가족의 굴레에서 벗어나 개인의 주체성을 회복하는데 중요한 역할을 하였으며, 해체된 관계단절의 회복은 개인의 자존감과 정체성이 먼저 정립된 후 이루어지는 쌍방향성 관계에서 가능한 것으로 나타났다.

• 한국재료학회지
• /
• 제29권1호
• /
• pp.1-6
• /
• 2019

Recent industrialization has led to a high demand for the use of fossil fuels. Therefore, the need for producing hydrogen and its utilization is essential for a sustainable society. For an eco-friendly future technology, photoelectrochemical water splitting using solar energy has proven promising amongst many other candidates. With this technique, semiconductors can be used as photocatalysts to generate electrons by light absorption, resulting in the reduction of hydrogen ions. The photocatalysts must be chemically stable, economically inexpensive and be able to utilize a wide range of light. From this perspective, cuprous oxide($Cu_2O$) is a promising p-type semiconductor because of its appropriate band gap. However, a major hindrance to the use of $Cu_2O$ is its instability at the potential in which hydrogen ion is reduced. In this study, gold is used as a bottom electrode during electrodeposition to obtain a preferential growth along the (111) plane of $Cu_2O$ while imperfections of the $Cu_2O$ thin films are removed. This study investigates the photoelectrochemical properties of $Cu_2O$. However, severe photo-induced corrosion impedes the use of $Cu_2O$ as a photoelectrode. Two candidates, $TiO_2$ and $SnO_2$, are selected for the passivation layer on $Cu_2O$ by by considering the Pourbaix-diagram. $TiO_2$ and $SnO_2$ passivation layers are deposited by atomic layer deposition(ALD) and a sputtering process, respectively. The investigation of the photoelectrochemical properties confirmed that $SnO_2$ is a good passivation layer for $Cu_2O$.

• 한국결정성장학회지
• /
• 제29권2호
• /
• pp.77-81
• /
• 2019

최근 환경오염에 관한 문제가 대두됨에 따라서 친환경 수처리 공법에 관한 다양한 방법들이 논의되고 있다. 현재 시장을 주도하고 있는 고분자 멤브레인은 저가이나, 내화학성 및 내구성 측면에서 많은 문제점을 안고 있다. 이에 따라 친환경적이며 내구성, 내화학성이 뛰어난 세라믹 멤브레인의 기공 구조, 크기 및 표면 처리를 통하여 고효율의 수처리용 세라믹 멤브레인을 제작하였다. $ZrO_2$ 및 $TiO_2$의 균일한 코팅막 형성을 통하여 멤브레인의 기공 크기를 조절 하였다. 테입케스팅, 졸겔 공정법을 활용하여 멤브레인 표면에 성공적으로 나노기공을 가지는 세라믹 코팅막을 형성하였다. 세라믹 멤브레인의 미세조직 분석, 코팅막의 기공의 크기 분석을 진행하였으며 이에 대한 수처리 특성 변화를 관측하였다.

• 한국융합학회논문지
• /
• 제12권1호
• /
• pp.105-110
• /
• 2021

의료기관에서 최근 많이 사용되고 있는 친환경 소재 방사선 차폐체는 시트 형태로 제작되어 Apron의 재료로 활용되고 있다. 친환경 Apron의 차폐성능은 납당량을 기준으로 제시되고 있으며, 납당량은 0.25~0.50mmPb로 제시되고 있다. 납이 주재료 사용되는 차폐체인 경우 납의 우수한 가공성으로 인해 두께로 차폐성능을 조절할 수 있다. 그러나 친환경 차폐시트는 차폐재료의 함량, 베이스 재료인 고분자 물질의 물성, 공정과정의 기술적 차이에 따라 차폐성능이 변화되어 두께 기준의 차폐성능을 제어하기가 어렵다. 본 연구에서는 이러한 문제점을 해결하고자 두께를 기준으로 차폐시트를 제작하여 차폐성능을 평가, 비교하였다. 동일한 시트 제작공정을 제시하여 두께를 제어할 수 있는 캘린더 공정의 압연 기술을 적용하였고 여러층의 적층 구조와 단일 구조로 제작된 두 시트의 두께별 차폐성능을 비교하여 5%대의 차이를 관찰하였다. 그 결과 여러 층으로 차폐한 적층 구조 차폐시트가 더 효과적임을 증명하는 동시에 두께 중심의 차폐성능의 가능성을 제시하였다.

• 한국표면공학회지
• /
• 제55권6호
• /
• pp.460-468
• /
• 2022

Due to its high electrical conductivity, low contact resistance, good weldability and high corrosion resi-stance, gold is widely used in electronic components such as connectors and printed circuit boards (PCB). Gold ion salts currently used in gold plating are largely cyan-based salts and non-cyanic salts. The cya-nide bath can be used for both high and low hardness, but the non-cyanide bath can be used for low hardness plating. Potassium gold cyanide (KAu(CN)₂) as a cyanide type and sodium gold sulfite (Na₃[Au(SO)₃]₂) salt as a non-cyanide type are most widely used. Although the cyan bath has excellent performance in plating, potassium gold cyanide (KAu(CN)₂) used in the cyan bath is classified as a poison and a toxic substance and has strong toxicity, which tends to damage the positive photoresist film and make it difficult to form a straight side-wall. There is a need to supplement this. Therefore, it is intended to supplement this with an eco-friendly process using sodium sulfite sodium salt that does not contain cyan. Therefore, the main goal is to form a gold plating layer with a controllable hardness using a non-cyanide gold plating solution. In this study, the composition of a non-cyanide gold plating solution that maintains hardness even after annealing is generated through gold-palladium alloying by adding thallium, a crystal regulator among electrolysis factors affecting the structure and hardness, and changes in plating layer structure and crystallinity before and after annealing the correlation with the hardness.

• 한국해양공학회지
• /
• 제35권1호
• /
• pp.50-58
• /
• 2021

The demand for eco-friendly energy is expected to increase due to the recently strengthened environmental regulations. In particular, the flow inside the pipe used in a cargo handling system (CHS) or fuel gas supply system (FGSS) of hydrogen transport ships and hydrogen-powered ships exhibits a very complex pattern of multiphase-thermal flow, including the boiling phenomenon and high accuracy analysis is required concerning safety. In this study, a feasibility study applying the boiling model was conducted to analyze the multiphase-thermal flow in the pipe considering the phase change. Two types of boiling models were employed and compared to implement the subcooled boiling phenomenon in nucleate boiling numerically. One was the "Rohsenow boiling model", which is the most commonly used one among the VOF (Volume-of-Fluid) boiling models under the Eulerian-Eulerian framework. The other was the "wall boiling model", which is suitable for nucleate boiling among the Eulerian multiphase models. Moreover, a comparative study was conducted by combining the nucleate site density and bubble departure diameter model that could influence the accuracy of the wall boiling model. A comparison of the Rohsenow boiling and the wall boiling models showed that the wall boiling model relatively well represented the process of bubble formation and development, even though more computation time was consumed. Among the combination of models used in the wall boiling model, the simulation results were affected significantly by the bubble departure diameter model, which had a very close relationship with the grid size. The present results are expected to provide useful information for identifying the characteristics of various parameters of the boiling model used in CFD simulations of multiphase-thermalflow, including phase change and selecting the appropriate parameters.

• 식물분류학회지
• /
• 제50권4호
• /
• pp.385-394
• /
• 2020

To elucidate the molecular phylogeny of Neottia japonica, which is a terrestrial orchid distributed in East Asia, the internal transcribed spacer (ITS) of nuclear DNA and the matK of chloroplast DNA were used. A total 22 species of 69 accessions for ITS and 21 species of 114 accessions for matK phylogeny were analyzed with the maximum parsimony and Bayesian methods. In addition, we sought to establish a correlation between the distribution, morphology of the auricles and genetic association of N. japonica with phylogenetic data. The phylogenetic results suggest that N. japonica is monophyletic and a sister to N. suzukii in terms of the ITS phylogeny, while it is paraphyletic with N. suzukii in terms of the matK phylogeny. N. japonica and N. suzukii show similar morphologies of the lip and column, they both flower in April, and they are both distributed sympatrically in Taiwan. Therefore, it appears to be clear that N. japonica and N. suzukii are close taxa within Neottia, although there is incongruence between the nrDNA and cpDNA phylogenies of N. japonica. The incongruence between the two datasets may have various causes, meaning that further studies are needed to confirm the evolutionary process of N. japonica. The phylogenetic status of N. kiusiana, which was not included in previous studies, was as a sister to N. nidus-avis. Meanwhile, the ITS and matK phylogenies are unsuitable for identifying genetic associations with the characteristic of auricles. The phylogenetic topologies of Korean, Taiwanese and mainland Chinese individuals suggest that the populations of N. japonica in Korea originated from China's mainland and island areas. The characterization of regional gene differences could provide useful preliminary data for future studies.