• Journal of the Korea Convergence Society
• /
• v.12 no.5
• /
• pp.191-196
• /
• 2021

This paper proposes to strengthen the technological capabilities of small and medium enterprises on the establishment of a component standardization system and the localization of parts, which is the basis of the marine wind industry. The wind industry is a natural energy industry that countries around the world are paying attention to, and continues to invest and research and development. In particular, most companies are focusing on research and investment in component development, the smallest unit. Therefore, it is believed that we should focus on the three most fundamental and underlying wind industry, an eco-friendly energy industry that could determine the fate of the nation in the future. First, an understanding of the roadmap for standardization should be prioritized. Second, it is necessary to establish a domestic standardization of international standards according to domestic conditions. Third, localization of high value-added single products and components should be achieved by lowering dependence on overseas imports. In the future, it is hoped that the wind industry, centered on small and medium-sized enterprises, will become a solid-based national industry and be completed as a national infrastructure leading the global wind market.

• Clean Technology
• /
• v.28 no.4
• /
• pp.278-284
• /
• 2022

This study presents an excellent planar heater based on low-dimensional composites. By optimizing the ratio of 1D carbon nanotubes (CNT) and 2D MXene (Ti₃C₂T_X), it is possible to create a planar heater that has superior electrical conductivity and high heat generation characteristics. Low-dimensional composites were prepared by mixing CNT paste and MXene solution with eco-friendly waterborne polyurethane (WPU). In order to find the optimal mixing ratio for the MXene-CNT-WPU composites, samples with MXene to CNT weight ratios of 3:1, 1:1, 1:3, 1:7, and 1:14 were investigated. In addition to these different weight ratios, 5 wt% WPU was equally applied to each sample. It was confirmed that the higher the weight ratio of CNT, the lower the sheet resistance and the higher the heating temperature. In particular, when the MXene-CNT-WPU planar heater was fabricated by mixing MXene and CNT at a weight ratio of 1:7 and 1:14, the heating temperature was higher than the heating temperature of a CNT-WPU planar heater. These characteristics are due to the optimized mixture of the 1D materials (CNT) and the 2D materials (MXene) causing the formation of a flat surface and a dense network structure. The low-dimensional composites manufactured with the optimized mixing ratios found in this study are expected to be applied in flexible electronic devices.

• Korean Chemical Engineering Research
• /
• v.61 no.2
• /
• pp.175-188
• /
• 2023

Global interest in hydrogen energy is increasing as an eco-friendly future energy that can replace fossil fuels. Accordingly, a next-generation hydrogen production technology using microorganisms, nuclear power, etc. is being developed, while a lot of time and effort are still required to overcome the cost of hydrogen production based on fossil fuels. As a way to minimize greenhouse gas emissions in the hydrocarbon-based hydrogen production process, methane direct decomposition technology has recently attracted attention. In order to improve the economic feasibility of the process, the simultaneous production of value-added carbon materials with hydrogen can be one of the most essential aspects. For that purpose, various studies on catalysis related to the quality and yield of high-value carbon materials such as carbon nanotubes (CNTs). In terms of process technology, a number of the research and development of fluidized-bed reactors capable of continuous production and improved gas-solid contact efficiency has been attempted. Recently, methane direct decomposition technology using a fluidized bed has been developed to the extent that it can produce 270 kg/day of hydrogen and 1000 kg/day of carbon. Plus, with the development of catalyst regeneration, separation and recirculation technologies, the process efficiency can be further improved. This review paper investigates the recent development of catalysts and fluidized bed reactor for methane direct pyrolysis to identify the key challenges and opportunities.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.1
• /
• pp.55-61
• /
• 2023

This study aims to develop CLSM fill material for emergency restoration using landfill coal ash. As a result of examining physical properties such as particle size distribution and fines content of landfill coal ash, bottom ash, fly ash, and general soil were mixed, and SP was found to have a density of 2.03 and a residual particle pass rate of 7.8 %. CLSM materials that secure fluidity in unit quantities without using chemical admixtures such as glidants and water reducing agents have a high risk of material separation due to bleeding. As a result of this experiment, it was found that the bleeding ratio did not satisfy the standard in the case of the specimen with a large amount of fly ash and a lot of addition of mixing water. As a result of the compressive strength test, the strength development of 0.5 MPa or more for 4 hours was found to be satisfactory for the specimens using hemihydrate gypsum with a unit binder amount of 200 or more, and the remaining gypsum showed poor strength development. Although it is judged that landfill coal ash can be used as a CLSM material, it is necessary to identify and apply the physical and chemical characteristics of coal ash buried in the ash treatment plant of each power generation company.

• Journal of Internet of Things and Convergence
• /
• v.10 no.1
• /
• pp.1-6
• /
• 2024

In order to increase the use of electric vehicles (EVs) and minimize grid strain, microgrid using renewable energy must take an important role. Microgrid may use fossil fuels such as small diesel power, but in many cases, they can be supplied with energy from renewable energy, which is an eco-friendly energy source. However, renewable energy such as solar and wind power have variable output characteristics. Therefore, in order to meet the charging and discharging energy demands of electric vehicles and at the same time supply load power stably, it is necessary to review the configuration of electric vehicle charging infrastructure that utilizes diesel power or electric vehicle-to-grid (V2G) as a parallel energy source in the microgrid. Against this background, this study modelized a microgrid that can stably supply power to loads using solar power, wind power, diesel power, and V2G. The proposed microgrid uses solar power and wind power generation as the primary supply energy source to respond to power demand, and determines the operation type of the load's electric vehicles and the rotation speed of the load synchronous machine to provide stable power from diesel power for insufficient generations. In order to verify the system performance of the proposed model, we studied the stable operation plan of the microgrid by simulating it with MATLAB /Simulink.

• Journal of Venture Innovation
• /
• v.6 no.3
• /
• pp.95-109
• /
• 2023

In light of the world grappling with diverse environmental issues due to climate change, the prominence of the 'pre-cycling' movement has grown. This movement strives to curtail or eliminate waste generation even before product purchases, garnering more attention than conventional eco-friendly practices. Consequently, this study employs experiments to delve into effective message strategies for promoting pre-cycling behaviors, which serve as preventive measures against the escalating environmental challenges posed by worsening waste problems. This study investigated the effects of message framing and temporal distance on pre-cycling behavioral intention. In terms of message frame, suggestive messages increased pre-cycling behavioral intention more than coercive messages, and temporal distance had no direct effect on pre-cycling behavioral intention. Assertive messages were associated with higher pre-cycling behavioral intentions when the target was interpreted as near future and suggestive messages were interpreted as distant future. Although temporal distance did not directly affect pre-cycling behavioral intention, it positively influenced consumers' pro-environmental behavioral intention by reducing their antipathy toward assertive messages. The implications of this study extend to the realm of management, offering insights into steering consumer behavior in response to pro-environmental messages.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.6
• /
• pp.1143-1150
• /
• 2023

The global climate crisis and the implementation of low-carbon policies have led to a growing interest in renewable energy and a growing number of related industries. Among them, solar power is attracting attention as a representative eco-friendly energy that does not deplete and does not emit pollutants or greenhouse gases. As a result, the supplement of solar power facility is increasing all over the world. However, solar power is easily affected by the environment such as geography and weather, so accurate solar power forecast is important for stable operation and efficient management. However, it is very hard to predict the exact amount of solar power using statistical methods. In addition, the conventional prediction methods have focused on only short- or long-term prediction, which causes to take long time to obtain various prediction models with different prediction horizons. Therefore, this study utilizes a many-to-many structure of a recurrent neural network (RNN) to integrate short-term and long-term predictions of solar power generation. We compare various RNN-based very short- and long-term prediction methods for solar power in terms of MSE and R² values.

• Journal of Service Research and Studies
• /
• v.14 no.2
• /
• pp.117-137
• /
• 2024

ESG has become a necessity for all companies, and major Korean banks are actively practicing ESG management. Banks are playing a role in providing ESG finance as intermediaries in the supply of funds. Recently, they have launched ESG digital banking products that offer preferential interest rates for eco-friendly activities in combination with digital technologies. However, indiscriminate provision of preferential interest rates can adversely affect profitability of banks, and they may face the problem of 'Greenwashing' if they do not contribute to improving environmental awareness. Therefore, this study selected ESG digital savings products linked to electricity savings as the subject of the study, and empirically analyzed consumers' environmental awareness and savings behavior through actual data of consumers (N=2,478). The main findings of this study are as follows First, the analysis of the consumer status of ESG digital banking products shows that the 30-50s are the main consumer base, and the MZ generation shows relatively high performance in achieving preferential interest rates through electricity saving practices. Second, consumers' environmental awareness has a significant impact on achieving the goals of ESG banking products. ESG banking products can contribute to environmental awareness while fulfilling the basic function of saving. Third, environmental awareness did not drive consumers' savings contribution behavior, suggesting the need for continued consumer engagement. Based on environmental awareness and the theory of saving behavior, this study provides a theoretical explanation in ESG financial products. The results suggest that the appropriateness of the preferential interest rate design of ESG financial products is important.

• Korean Journal of Environment and Ecology
• /
• v.30 no.5
• /
• pp.837-847
• /
• 2016

In this study, the bird fauna of Sihwa Lake in Gyeonggi Province were investigated from 2009 to 2014 to identify the effect of the restored intertidal zone on bird community. Based upon the analysis of the habitat status and distribution change of water birds in the intertidal zone, the following conclusions were obtained. The number of water bird individuals increased by approx. 40 thousand after the restoration. Most of water bird species increased, but diving ducks decreased. Analysis of the number of individuals of water birds before and after the intertidal zone restoration showed that there was a significant increase in the number of shorebird individuals. There is a habitat use pattern change in the southern tideland intertidal zone that includes the largest area of widened intertidal zone and the inland waters of the intertidal zone. This is related to the change of benthic ecosystem which is the food source of birds. The benthic ecosystem in restoring Sihwa Lake has been stabilized with a decrease in opportunistic species and consistent increase in equilibrium species that are sensitive to pollution. As a result, the environmental conditions for shorebirds have been improved. The restoration of intertidal zone affected the habitat use and distribution patterns of water birds in a short period of time. Compared to before restoration, all the water birds now use the wide area of the intertidal zone with no partiality and it is confirmed that the restoration greatly affected the distribution of shorebirds and swan & geese. This study was conduced to identify the effects of an artificial restoration of intertidal zone due to tidal power generation of bird species. In terms of maintaining and improving biodiversity, the intertidal zone restoration was recognized to be important and still shows positive results. This study is expected to provide a direction when an alternative is required to maintain and improve biodiversity in a similar situation in the future.

• Korean Journal of Ecology and Environment
• /
• v.56 no.1
• /
• pp.36-44
• /
• 2023

Environmental DNA (eDNA) can exist in both intracellular and extracellular forms in natural ecosystems. When targeting harmful cyanobacteria, extracellular eDNA indicates the presence of traces of cyanobacteria, while intracellular eDNA indicates the potential for cyanobacteria to occur. However, identifying the "actual" potential for harmful cyanobacteria to occur is difficult using the existing sediment eDNA analysis method, which uses silica beads and cannot distinguish between these two forms of eDNA. This study analyzes the applicability of a density gradient centrifugation method (Ludox method) that can selectively analyze intracellular eDNA in sediment to overcome the limitations of conventional sediment eDNA analysis. PCR was used to amplify the extracted eDNA based on the two different methods, and the relative amount of gene amplification was compared using electrophoresis and Image J application. While the conventional bead beating method uses sediment as it is to extract eDNA, it is unknown whether the mic gene amplified from eDNA exists in the cyanobacterial cell or only outside of the cell. However, since the Ludox method concentrates the intracellular eDNA of the sediment through filtration and density gradient, only the mic gene present in the cyanobacteria cells could be amplified. Furthermore, the bead beating method can analyze up to 1 g of sediment at a time, whereas the Ludox method can analyze 5 g to 30 g at a time. This gram of sediments makes it possible to search for even a small amount of mic gene that cannot be searched by conventional bead beating method. In this study, the Ludox method secured sufficient intracellular gene concentration and clearly distinguished intracellular and extracellular eDNA, enabling more accurate and detailed potential analysis. By using the Ludox method for environmental RNA expression and next-generation sequencing (NGS) of harmful cyanobacteria in the sediment, it will be possible to analyze the potential more realistically.