• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.5
• /
• pp.171-182
• /
• 2019

Bicycles are a pollution-free means of transportation. In addition to leisure, the use of bicycles is increasing as alternative eco-friendly transportation. Accordingly, bicycle accidents are also increasing. The purpose of this study is to implement bicycle black box technology to identify situation when a bicycle accident occurs. Currently, bicycle black box products are mainly based on video cameras, and are commercially available by adding various functions mainly on high resolution cameras and are sold at high prices. If a bicycle accident occurs, quantitative data on the accident location at the time of the accident and the state of the bicycle at the time of the accident is required. In this study, IMU sensor used to obtain acceleration and slope, and time and coordinates are obtained. In addition, real-time acceleration and tilt data while is stored in memory card and by using Bluetooth transmit to the smart phone owned by the in real time to prevent accidents and to monitor status.

• Journal of the Korean Society of Safety
• /
• v.34 no.1
• /
• pp.27-33
• /
• 2019

Combustion characteristics of gasoline/ethanol fuel were investigated both numerically and experimentally for vehicle fire safety. The numerical simulation was performed on the well-stirred reactor (WSR) to simulate the homogeneous gasoline engine and to clarify the effect of ethanol addition in the gasoline fuel. The simulating cases with three independent variables, i.e. ethanol mole fraction, equivalence ratio and residence time, were designed to predict and optimized systematically based on the response surface method (RSM). The results of stoichiometric gasoline surrogate show that the auto-ignition temperature increases but NOx yields decrease with increasing ethanol mole fraction. This implies that the bioethanol added gasoline is an eco-friendly fuel on engine running condition. However, unburned hydrocarbon is increased dramatically with increasing ethanol content, which results from the incomplete combustion and hence need to adjust combustion itself rather than an after-treatment system. For more tangible understanding of gasoline/ethanol fuel on pollutant emissions, experimental measurements of combustion products were performed in gasoline/ethanol pool fires in the cup burner. The results show that soot yield by gravimetric sampling was decreased dramatically as ethanol was added, but NOx emission was almost comparable regardless of ethanol mole fraction. For soot morphology by TEM sampling, the incipient soot such as a liquid like PAHs was observed clearly on the soot of higher ethanol containing gasoline, and the soot might be matured under the undiluted gasoline fuel.

• Journal of Microbiology and Biotechnology
• /
• v.29 no.1
• /
• pp.79-90
• /
• 2019

Lichens are generally known as self-sufficient, symbiotic life-forms between fungi and algae/cyanobacteria, and they also provide shelter for a wide range of beneficial bacteria. Currently, bacterial-derived biodegradable polyhydroxyalkanoate (PHA) is grabbing the attention of many researchers as a promising alternative to non-degradable plastics. This study was conducted to develop a new method of PHA production using unexplored lichen-associated bacteria, which can simultaneously degrade two ubiquitous industrial toxins, anthracene and naphthalene. Here, 49 lichen-associated bacteria were isolated and tested for PHA synthesis. During the GC-MS analysis, a potential strain of EL19 was found to be a 3-hydroxyhexanoate (3-HHx) accumulator and identified as Pseudomonas sp. based on the 16S rRNA sequencing. GC analysis revealed that EL19 was capable of accumulating 30.62% and 19.63% of 3-HHx from naphthalene and anthracene, respectively, resulting in significant degradation of 98% and 96% of naphthalene and anthracene, respectively, within seven days. Moreover, the highly expressed phaC gene verified the genetic basis of $PHA_{mcl}$ production under nitrogen starvation conditions. Thus, this study strongly supports the hypothesis that lichen-associated bacteria can detoxify naphthalene and anthracene, store energy for extreme conditions, and probably help the associated lichen to live in extreme conditions. So far, this is the first investigation of lichen-associated bacteria that might utilize harmful toxins as feasible supplements and convert anthracene and naphthalene into eco-friendly 3-HHx. Implementation of the developed method would reduce the production cost of $PHA_{mcl}$ while removing harmful waste products from the environment.

• The Research Journal of the Costume Culture
• /
• v.29 no.5
• /
• pp.679-693
• /
• 2021

The aim of this study was first to expand participation types in the field of beauty design by examining activities in the field, and second, to seek practical methods for addressing the important issue of social responsibility amid the current pandemic situation. Accordingly, social responsibility in design was examined through a review of previous studies. The features of practice domains and design performance fields were examined comparatively. As a result, it was found that social practices take place in various sectors, with sensibility toward the environment being escalated to a new level in the cosmetics industry. In terms of cosmetics enterprise practices, collecting, recycling, manufacturing, and retail networking has been established to reuse up to 95% of waste resources. Furthermore, ethical responsibility and participation concerning product and service waste resources are recommended, resulting in the supply of eco-friendly products in a virtuous cycle. In terms of systematic policy, even component transformation (such as organic certification and excluding toxic substances) is being carried out. However, it was difficult to identify such responsible activities in Korea; thus, systematic practice is needed. Designers take part in talent donation activities, and it was the sector they prefer the most. However, it is necessary to conduct studies on limitations such as venues equipped with cosmetics procedure equipment and public cosmetics sanitation and make systematic improvement, such that activities can be led with initiative from passive participation.

• Journal of Animal Science and Technology
• /
• v.63 no.2
• /
• pp.354-366
• /
• 2021

Limited data about the effects of various factors on forage quality and β-carotene content of rye produced in Korea are available, so this study investigated the effects of two preservation methods. Samples were collected from rye harvested every 5 days between April 25 and May 31, and comparisons were done among rye silage wilted for different periods of time and hay of three growth stages of rye. For the silage, dry matter (DM), acid detergent fiber (ADF), and neutral detergent fiber (NDF) contents increased with advanced maturity of rye, whereas crude protein, in vitro dry matter digestibility (IVDMD), total digestible nutrients (TDN), relative feed value (RFV), and DM loss decreased (p < 0.0001). Wilting increased the DM content and pH value significantly (p < 0.0001). Silage harvested at the heading stage had the lowest pH value (4.45), propionic acid (0.83 g/kg DM), butyric acid (0 g/kg DM), and fungi and yeast populations (3.70 Log CFU/g of fresh matter [FM]); conversely, it had the highest lactic acid (9.7 g/kg DM), lactic acid bacteria (LAB) (6.87 Log CFU/g of FM), total microorganisms (TM) (7.33 Log CFU/g of FM), and Flieg's score (70) (p < 0.0001). Wilting elevated LAB and TM populations, but it had no consistent effect on other fermentation products. Both delayed harvest and prolonged wilting decreased β-carotene content. Rye silage harvested around May 9 (heading stage) with 24 h of wilting was preferred for highland, Pyeongchang. For rye hay, advanced maturity decreased DM loss, IVDMD, TDN, and RFV, but it increased DM, ADF, and NDF significantly (p < 0.05). β-carotene was decreased by delay of hay-making. Consequently, to attain lower DM loss and higher hay quality, the harvest date of May 9 (heading stage) is recommended.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.27 no.3
• /
• pp.175-180
• /
• 2021

Although it has recently been regulated for use as an eco-friendly policy in Korea, the use of EPS (Expanded Polystyrene) cooling boxes, which are used as cold chain delivery insulation boxes for fresh agricultural and livestock products, is also increasing rapidly as e-commerce logistics such as delivery have increased rapidly due to COVID-19. Studies were conducted to optimize the EPS cooling container through internal air heat flow of CFD (Computational Fluid Dynamics) analysis and FEM (Finite Element Method) random vibration analysis using domestic PSD (Power Spectral Density) profile of the EPS cooling box to which the refrigerant is applied in this study. In the analysis of the internal air heat flow by the refrigerant in the EPS cooling box, the application of vertical protrusions inside was excellent in volume heat flow and internal air temperature distribution. In addition, as a result of random vibration analysis, the internal vertical protrusion gives the rigid effect of the cooling box, so that displacement and stress generation due to vibration during transport are smaller than that of a general cooling container without protrusion. By utilizing the resonance point (frequency) of the EPS cooling box derived by the Model analysis of ANSYS Software, it can be applied to the insulation and cushion packaging design of the EPS product line, which is widely used as insulation and cushion materials.

• Korean Journal of Organic Agriculture
• /
• v.29 no.1
• /
• pp.125-136
• /
• 2021

In this study, a meta-analysis was performed to determine the correlation between the expression of tight junction protein in the intestine and the productivity of broiler chickens. A total of 9 papers were selected in which the result values consisted of the mean and standard deviation value, and the standardized mean difference was calculated to compare the mean of the control and treatment groups. A meta-regression test was conducted to determine the effect of each type of tight junction protein. The TJPs observed in each study were claudin1, claudin2, claudin3, occludin, ZO1, ZO2, etc., and the indicators to indicate the productivity of broilers were body weight gain (BWG), feed intake (FI), and feed conversion rate (FCR), average daily feed intake (ADFI), average daily gain (ADG), and feed/gain ratio (FPG). Although there are differences depending on the type of TJP, it was found that the change in expression level had a close effect on the productivity of broilers. In particular, occludin significantly correlated with body weight gain, feed intake, and feed conversion rate. Based on the results of this study, a study on a method to effectively increase the expression level of TJP is expected to contribute to improving the productivity of broilers and producing safe livestock products.

• Journal of Marine Bioscience and Biotechnology
• /
• v.14 no.2
• /
• pp.133-142
• /
• 2022

The increased production and consumption of polyethylene terephthalate (PET)-based products over the past several decades has resulted in the discharge of countless tons of PET waste into the marine environment. PET microparticles resulting from the physical erosion of general PET wastes end up in the ocean and pose a threat to the marine biosphere and human health, necessitating the development of new technologies for recycling and upcycling. Notably, enzyme-mediated PET degradation is an appealing option due to its eco-friendly and energy-saving characteristics. PETase, a PET-hydrolyzing enzyme originating from Ideonella sakaiensis, is one of the most thoroughly researched biological catalysts. However, the industrial application of PETase-mediated PET recycling is limited due to the low stability and poor reusability of the enzyme. Here we developed the whole-cell catalyst (WCC) in which functional PETase is attached to the outer membrane of Escherichia coli. Immunoassays are used to identify the surface-expressed PETase, and we demonstrated that the WCC degraded PET microparticles most efficiently at 30℃ and pH 9 without agitation. Furthermore, the WCC increased the PET-degrading activity in a concentration-dependent manner, surpassing the limited activity of soluble PETase above 100 nM. Finally, we demonstrated that the WCC could be recycled up to three times.

• Textile Coloration and Finishing
• /
• v.33 no.4
• /
• pp.202-209
• /
• 2021

Natural dyes are more expensive than synthetic dyes and the dyeing process, which is mainly immersion of dye, is complicated. For this reason, relatively small-scale production methods were predominant. However, awareness and interest in environmental sustainability is rising globally, and the use of synthetic dyes causes various environmental problems such as wastewater and CO₂ emission, so the consumption of natural dyes is increasing. In addition, interest in digital textile printing, an eco-friendly dyeing method that can produce products of various designs and uses less water, is growing. In this study, natural indigo dye (Indigofera tinctoria) was used as a raw material for Digital Textile Printing ink, and ¹⁴C (Biocarbon) present in it was measured to confirm whether it was derived from natural ingredients. The performance was confirmed by testing the pH, viscosity, electrical conductivity, surface tension, and particle size analysis of natural indigo ink. In addition, the performance of natural indigo DTP ink and printing fabric was evaluated by inspecting the change in color fastness and corresponding index substances before and after digital printing with natural indigo DTP ink on textiles. Through this, the possibility of commercialization of DTP ink and printing fabric using natural indigo was confirmed.

• The Journal of Engineering Geology
• /
• v.32 no.4
• /
• pp.661-670
• /
• 2022

In recent years, extreme rainfall and rainy seasons caused by climate change have caused river flooding and flooding damage, and it is urgent to solve economic and environmental problems in the city center due to the increase in the number of peak homes. The gap block, called the fitting block, is designed to facilitate rainwater pitching by forming a gap between the block and the block by forming a concave part and a protrusion of the block differently without the use of an existing spacer. In this study, for the production of such a gap block, the existing cement content was reduced and aramid fibers and exploration fibers, which are industrial by-products such as Goroslag fine powder and reinforcing fibers, were applied.