• 한국기후변화학회지
• /
• 제8권1호
• /
• pp.41-50
• /
• 2017

As serious consequences of climate change became indisputable, vehicles based on fossil fuel has to be shifted toward more sustainable way to drastically reduce carbon emissions. Eco-friendly vehicles contribute mitigating climate change through reducing the greenhouse gas emissions. The goal of this research is to find ways to promote the eco-friendly vehicle industry in Korea. In order to achieve this goal, surveys are collected from the professionals of eco-friendly vehicle industry, and analyzed through Delphi method. Results show that the first thing is to promote the eco-friendly vehicle market by introducing the economic incentives. The second thing is to allow more emission credit for eco-friendly vehicle manufacturers. The third thing is to build more concrete infrastructure for the eco-friendly vehicles. The increase of the number of the electric or hydrogen charging system would be one of the good examples of the infrastructure. The fourth thing is that the government supports the research & development of eco-friendly vehicles. The fifth is to regulate that the government agency is mandatory to use the eco-friendly vehicles. The sixth thing is to provide the low-carbon certification for eco-friendly vehicles. The seventh thing is to support advertising the eco-friendly vehicles. The results from this research can be used as a guideline to make policies to stimulate the eco-friendly vehicle industry in Korea.

• Journal of information and communication convergence engineering
• /
• 제21권3호
• /
• pp.233-238
• /
• 2023

This study presents a method for identifying partial discharge defects in an eco-friendly gas insulated system using a backpropagation algorithm. Four partial discharge (PD) electrode systems, namely, a free-moving particle, protrusion on the conductor, protrusion on the enclosure, and voids, were designed to simulate PD defects that can occur during the operation of eco-friendly gas-insulated switchgear. The PD signals were measured using an ultrahigh-frequency sensor as a nonconventional method based on IEC 62478. To identify the types of PD defects, the PD parameters of single PD pulses in the time and frequency domains and the phase-resolved partial discharge patterns were extracted, and a back-propagation algorithm in the artificial neural network was designed using a virtual instrument based on LabVIEW. The backpropagation algorithm proposed in this paper has an accuracy rate of over 90% for identifying the types of PD defects, and the result is expected to be used as a reference database for asset management and maintenance work for eco-friendly gas-insulated power equipment.

• 한국기계가공학회지
• /
• 제21권9호
• /
• pp.42-49
• /
• 2022

An underground electric switch is a high-voltage switch used in distribution network systems for a reliable power supply. Many studies are being conducted to expand the switch to use an eco-friendly gas using dry air instead of SF6 gas to reduce greenhouse gas emissions. In this study, a flow analysis model was established to improve the performance of an eco-friendly gas switch. The results were compared and reviewed through experiments. For the optimal arc grid design applied to the switch, the flow characteristics based on the flow path configuration and the changes in arcing time for each configuration were compared. Flow analysis can predict the switch flow distribution, and a comparative review of the flow path configurations of various methods is possible.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1219_1220
• /
• 2009

In recent years, the companies of electric power equipment for MV, HV class trend to develop that the eco-friendly insulated(solid, eco-gas, air etc.) switchgear replace with existent SF6 gas insulated switchgear by environmental problems such as global warming and soon. This paper introduces the Solid Insulated Switchgear(SIS) which is the epoxy of eco-friendly insulation material. The characteristic of SIS to introduce in this paper is as following. 1) Eco-friendly. (SF6 gas free) 2) The structure of flexible system. (Expansion) 3) The optimum design. (The Analysis of electrical & mechanical) 4) An Interface treatment between epoxy and insert. (Molding technology) This paper described about some technology for development of SIS.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 추계 학술논문 발표대회
• /
• pp.106-107
• /
• 2019

Recently, maintenance of old facilities has emerged as a major issue. In particular, the demand for road cutting and excavation is increasing due to the aging of underground facilities such as water supply, sewage and city gas. In addition, the development of eco-friendly equipment is required due to the environmental problems of noise and dust. Therefore, this study intends to analyze the performance in terms of productivity of the eco-friendly road cutter developed as part of the development of eco-friendly equipment, and to derive improvements.

• 한국군사과학기술학회지
• /
• 제13권2호
• /
• pp.275-282
• /
• 2010

The improved properties of surface layer can be achieved by so-called "new salt bath nitriding(NSBN)", which has been developed by a domestic company. This process based upon modified traditional salt bath nitriding process, increased hardenability with minimum toughness deterioration. This process also offers not only less white layer surfaces but also more eco-friendly one. That is, NSBN is the new eco-friendly surface treatment technology removing harmful $CN^-$ and toxic gas. According to the research of applying NSBN to Cr-Mo-V steel which has been used in defense industry, showed the improved result of wear resistance and surface hardening than non-coated condition. In further, we expect NSBN to curtail expenses and productivity improvement applied to the various defense industry parts.

• 한국수소및신에너지학회논문집
• /
• 제31권1호
• /
• pp.57-64
• /
• 2020

The water-gas shift reaction for the compact reformer was carried out at a gas hourly space velocity of 72,152 h^-1 over the Cu-Nb-CeO₂ catalysts prepared by co-precipitation method. In order to investigate the effect of Nb₂O₅ promotion over a Cu-CeO₂ catalyst, the Nb₂O₅ loading amount was systematically changed from 0 to 5 wt.%. Among the prepared catalysts, the Cu-Nb-CeO₂ (1%) catalyst showed the highest catalytic activity (CO conversion=61% at 400℃) as well as 100% CO₂ selectivity. The high activity and stability of Cu-Nb-CeO₂ (1%) catalyst are correlated to high Brunauer-Emmett-Teller surface area, small metallic Cu crystallite size, and enhanced redox property.

• 한국추진공학회지
• /
• 제21권2호
• /
• pp.26-31
• /
• 2017

고체 추진제의 환경적 문제는 고체 로켓에서 중요한 이슈로 부각되고 있다. 예를 들어 고체추진제의 산화제인 ammonium perchlorate (AP)는 염산과 같은 독성 가스와 대기 오염을 발생시켜 환경적 문제를 야기한다. 산화제 중 N-guanylurea dinitramide (GuDN)는 높은 성능과 압력 지수를 가지고 있으며, 가스발생기 추진제에서 연소하는 동안 친환경적인 연기를 배출하는 성질을 가지고 있기 때문에 환경친화적으로 효과적인 후보 물질이다. 본 논문에서는 가스발생기 추진제로서 특성에 대하여 이론적 분석, 추진제 제조공정성, 추진제 경도 특성 및 연소특성에 대하여 연구하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.289-290
• /
• 2008

The purpose of this paper is to analyze AC Breakdown of solid/air composite insulation depending on the thickness and the pressure of dry air for eco-friendly insulation. SF6 gas has been widely used in electric equipment as gas insulation because of high dielectric strength and arc extinguishing performance. However, because SF6 gas is one of the green house effect gases, alternative insulation such as SF6 mixture, extremely low temperature gas, vacuum, liquid and solid insulating are being investigated.

• 열처리공학회지
• /
• 제36권1호
• /
• pp.40-46
• /
• 2023

Controlled nitriding is a technology that controls the nitriding potential based on the gas partial pressure received through an IOT-based sensor. Controlled nitriding is characterized by easy control of the phase of the nitride compound and excellent reproducibility of quality. In particular, it is possible to form a compound layer of excellent quality with fewer pores on the surface. However, despite these advantages, the application of controlled nitriding still needs to be improved in Korea. This paper explains the characteristics of controlled nitriding and describes the future direction and the problems of controlled nitriding in Korea.