• Environmental and Resource Economics Review
• /
• v.31 no.2
• /
• pp.291-317
• /
• 2022

This study tried to analyze the factors affecting consumers' vehicle selection for the spread of eco-friendly vehicles. We used the energy census data for this purpose, and although the energy census collects useful information from a large number of samples, it has been limitedly used to create simple statistics in many cases. Based on 2,771 transport sector microdata from the 2017 Energy Census, we collected vehicle price, fuel efficiency, and number of vehicle models, which are alternative characteristic variables that change according to consumers' choice, and converted and analyzed data to enable conjoint analysis. The analysis results in two-folds. First, it was confirmed that the official fuel efficiency of a vehicle and the fuel cost, which is affected by changes in the relative price of each fuel, are important variables in selecting an eco-friendly vehicle. In order to achieve the goal of spread of eco-friendly vehicles, it is necessary to develop technologies to improve fuel efficiency and set appropriate electric rates for charging electric vehicles. Second, an increase in the number of vehicle models through the expansion of the eco-friendly car industry and market also affects consumers' choice of eco-friendly vehicles, so efforts to expand the supply of eco-friendly vehicles will be an important factor. In addition, it is also significant that this study showed that the use of the energy census can be diversified by deriving meaningful policy implications using the results of the energy census periodically conducted in the country without a separate survey.

• Environmental Engineering Research
• /
• v.20 no.3
• /
• pp.212-222
• /
• 2015

Experiments were conducted on the immobilization of eight heavy metals (HMs) (Zn, Cu, Mn, Fe, Ni, Pb, Cd, and Cr) during 20-day rotary drum composting of water hyacinth. The Tessier sequential extraction procedure was used to investigate the fractionation of HMs. The eco-toxicity risk of HMs was assessed by risk assessment code (RAC). In the results, the bioavailability factor (BAF) for different HMs presented in the following order: Mn > Zn = Fe > Cu > Cr > Cd = Pb > Ni. The total concentration of Pb was higher than that of Zn, Cu, Mn, Cd and Cr; however, its BAF was the lowest among these HMs. These results confirmed that the eco-toxicity of HMs depends on bioavailable fractions rather than on the total concentration. The greatest reduction in bioavailability and eco-toxicity risk of HMs occurred in lime 1% and 2% as compared to control and lime 3%. The eco-toxicity risk of Fe, Ni, Pb, Cd and Cr was reduced from low risk to zero risk by rotary drum composting. These studies demonstrated the high efficiency of the rotary drum for degrading compost materials and for reducing the bioavailability and eco-toxicity risk of HMs during the composting process.

• Fashion & Textile Research Journal
• /
• v.12 no.5
• /
• pp.555-563
• /
• 2010

This research has attempted for a categorization by contemplating on concepts and characteristics of eco fashion design through analysis of precedent studies and to study the design characteristics, images, and internal values through keyword and design codes which appeared in the precedent studies. The subject of analysis was mostly focused on the theses published in international and domestic academic journals from 1990s to September 2009. The design characteristics of each eco fashion design were analyzed by classifying by form, detail, color, fabric and pattern. Method of analysis did content analysis. The results of the research can be summarized as follows. First of all, types of eco fashion design were human-ecology design, natural-ecology design, and social-ecology design. Secondly, the human-ecology design was presented a natural and comfortable form, color of the nature, and functional and new materials. The natural-ecology design was presented a natural silhouette, natural colors, and natural fiber. The social-ecology design were used a loose silhouette and over-size forms, natural colors, and recycled materials and bio fabric. Thirdly, the images per type of eco fashion design were Zen, sportive, natural, and modern image. And the internal values were presented efficiency, health-orientation, naturalness, and continuity.

• Journal of Korean Society for Atmospheric Environment
• /
• v.26 no.6
• /
• pp.690-696
• /
• 2010

Abatement of perfluorocompounds (PFCs) used in semiconductor and display industries has received an attention due to the increasingly stricter regulation on their emission. In order to meet this circumstance, we have developed a radio frequency (RF) driven plasma reactor with multiple annular shaped electrodes, characterized by an easy installment between a processing chamber and a vacuum pump. Abatement experiment has been performed with respect to $CF_4$, a representative PFCs widely used in the plasma etching process, by varying the power, $CF_4$ and $O_2$ flow rates, $CF_4$ concentration, and pressure. The influence of these variables on the $CF_4$ abatement was analyzed and discussed in terms of the destruction & removal efficiency (DRE), measured with a Fourier transform infrared (FTIR) spectrometer. The results revealed that DRE was enhanced with the increase in the discharge power and pressure, but dropped with the $CF_4$ flow rate and concentration. The addition of small quantity of $O_2$ lead to the improvement of DRE, which, however, leveled off and then decreased with $O_2$ flow rate.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.16 no.2
• /
• pp.57-65
• /
• 2008

Wastewater containing strong organic matter is very difficult to treat by utilizing general sewage treatment plant. but the wastewater is adequate to generate biomass energy (bio-gas; methane gas) by utilizing anaerobic digestion. EcoDays Plug Flow Reactor (E-PFR), which was already proved as an excellent aerobic wastewater treatment reactor, was adapted for anaerobic food wastewater digestion. This research was performed to improve the efficiency of bio-gas production and to optimize anaerobic wastewater treatment system. Food wastewater from N food waste treatment plant was applied for the pilot scale experiments. The results indicated that the efficiency of anaerobic wastewater treatment and the volume of bio-gas were increased by applying E-PFR to anaerobic digestion. The structural characteristics of E-PFR can cause the high efficiency of anaerobic treatment processes. The unique structure of E-PFR is a diaphragm dividing vertical hydraulic multi-stages and the inversely protruded fluid transfer tubes on each diaphragm. The unique structure of E-PFR can make gas hold-up space at the top part of each stage in the reactor. Also, E-PFR can contain relatively high MLSS concentration in lower stage by vertical up-flow of wastewater. This hydraulic flow can cause high buffering capacity against shock load from the wastewater in the reactor, resulting in stable pH (7.0~8.0), relatively higher wastewater treatment efficiency, and larger volume of bio-gas generation. In addition, relatively longer solid retention time (SRT) in the reactor can increase organic matter degradation and bio-gas production efficiency. These characteristics in the reactor can be regarded as "ideal" anaerobic wastewater treatment conditions. Anaerobic wastewater treatment plant design factor can be assessed for having 70 % of methane gas content, and better bio-gas yielding and stable treatment efficiency based on the results of this research. For example, inner circulation with generated bio-gas in the reactor and better mixing conditions by improving fluid transfer tube structure can be used for achieving better bio-gas yielding efficiency. This research results can be used for acquiring better improved regenerated energy system.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1998.08a
• /
• pp.38.2-38
• /
• 1998

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.10 no.3
• /
• pp.225-229
• /
• 2005

To investigate impediments to plasmid transformation in Brevibacterium flavum BF4 and B. lactofermentum BL1, cell surface barriers were determined by measuring growth inhibition whilst enzymatic barriers were determined by comparing DNA methylation properties. B. lactofermentum was more sensitive to growth inhibition by glycine than B. flavum. Release of cellular proteins during sonication was more rapid for B. lactofermentum than for B. flavum. Plasmid DNA (pCSL 17) isolated from B. flavum transformed recipient $McrBC^+$ strains of Escherichia coli with lower efficiency than $McrBC^-$. McrBC digestion of this DNA confirmed that B. flavum contain methylated cytidines in the target sequence of McrBc sequences but B. lactofermentum contained a different methylation pattern. DNA derived from the B. lactofermentum transformed recipient $EcoKR^+$ strains of E. coli with lower efficiency than $EcoKR^-$, indicating the presence of methylated adenosines in the target sequence of EcoK sequences. The present data describe the differences in the physical and enzymatic barriers between two species of corynebacteria and also provide some insight into the successful foreign gene expression in corynebacteria.

• The Plant Pathology Journal
• /
• v.27 no.1
• /
• pp.53-58
• /
• 2011

Systemic acquired resistance is a form of inducible resistance that is triggered in systemic healthy tissues of local-infected plants. Several candidate signaling molecules emerged in the past two years, including the methylated derivatives of well-known defense hormones salicylic acid (SA) and jasmonic acid (JA). In our present study, the symptom on Cucumber mosaic virus (CMV) infected Arabidopsis leaves in 0.1 mM SA or 0.06 mM JA pre-treated plants was lighter (less reactive oxygen species accumulation and less oxidative damages) than that of the control group. JA followed by SA (JA${\rightarrow}$SA) had the highest inhibitory efficiency to CMV replication, higher than JA and SA simultaneous co-pretreatment (JA+SA), and higher than a JA or a SA single pretreatment. The crosstalk between the two hormones was further investigated at the transcriptional levels of pathogenesis-related genes. The time-course measurement showed JA might play a more important role in the interaction between JA and SA.

• Environmental and Resource Economics Review
• /
• v.15 no.2
• /
• pp.355-386
• /
• 2006

This paper analyses recent regional development policies being carried out in Japan and the U.S. Such policies are formed on the sustainability principle aiming at the realization of circula-flow economy and zero waste society. The study here illuminates Japan's Eco-town project and three cases of eco-industrial developments in Minnesota. Such projects have gone from improving industry competitiveness through constructing clean production systems on the company level to improving national competitiveness through constructing a 'circular society' on the government level. Japan included the realization of a 'circular society' as its government's top agenda because it recognized that environmental pollution stems from the inefficient use of natural resources. Eco-town project is a regional development policy specifically reflecting such recognition. The eco-efficiency based city development approaches in Minnesota are but small examples of the new wave in regional development in the developed countries. We need to go beyond emphasizing eco-friendly and ethical management to just the companies. The government itself needs to design national policies based on environmental sustainability.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.3
• /
• pp.1253-1260
• /
• 2013

Eco-town development projects have often prevailed throughout the World to initiate the new form of sustainable development plans. As a future development type, the eco-town project shares underlying notions with sustainable development, which has been recently revised into a wider definition; (i) energy efficiency, (ii) climate adaptation, and (iii) socio-economic development. There are four types of eco-town projects based on its characteristics and aims depending on project sites, regions, or countries. This paper tried to demonstrate the types of eco-town projects and summarizes its strategy plans from each type. Many eco-town cases can be placed in one of types, however there cannot be strictly discrete classification by its complicated and composite characteristics of them. In conclusion, the analyzed types can be a useful strategy plan for pursuing further eco-town projects in domestic as well as in international regions.