• 대한조선학회논문집
• /
• 제60권6호
• /
• pp.441-449
• /
• 2023

With the enforcement of environmental regulations by the International Maritime Organization, the market for eco-friendly ships is expanding, and ships using electric propulsion devices are emerging as a promising solution. Many studies have been conducted to predict the failure of ships, but most of them are mainly research on the main diesel engine of ships. As the ship's propulsion method changes, new data is needed to predict the failure of electric propulsion ships. In this paper aims to analyze the failure characteristics of the electric propulsion system in consideration of the difference in the type of failure between the internal diesel engine and the electric propulsion system. The ship's propulsion unit assumed a DC motor and a signal pattern for normal conditions and general failure modes, but the failure record of the electric propulsion device operated on the actual ship was not available, so it generated a failure signal for small electric motor equipment to identify the failure signal. Assuming unbalance, misalignment, and bearing failure, which are the primary failure modes of the ship's electric motor, a failure signal was generated using a "rotator vibration data generator," and the frequency band, size, and phase difference of the measured vibration signal were analyzed to analyze the characteristics of each failure condition. Finally, the characteristics of each failure condition were identified so that the signals according to the failure type could be classified.

• 해양환경안전학회지
• /
• 제24권3호
• /
• pp.373-380
• /
• 2018

The small coastal vessel registered in Korea, small coastal vessels with a gross tonnage of 10 tons or less account for 94.6 % and among them, aged vessels over 16 years age indicate 40.6 %. In order to reduce GHG emissions from small coast vessels, discussions are underway to replace aging ships' propulsion units with eco - friendly propulsion facilities, and the electric propulsion ship is emerging as one of the measures. The electric propulsion system using the DFE rectifier, which was applied in the conventional large commercial vessel, was effective in reducing the harmonics and improving the DC output voltage of the DC link stage, but it occupied a large volume and caused an increase in the overall system price. Therefore, in this paper, we propose an electric propulsion system using AFE rectifier with a small volume of system that can be applied to a small coastal vessel. In order to analyze the effectiveness of the overall system, the load profile was applied to obtain accurate and rapid speed tracking performance of the propulsion motor affected by the speed load. In addition, the power factor and total harmonic distortion factor of the voltage and current on the improved power output side are derived through simulation.

• 한국융합학회논문지
• /
• 제9권7호
• /
• pp.199-203
• /
• 2018

온실가스 배출규제에 따라 국내 조선소를 중심으로 LNG연료로 추진되는 친환경 선박기술 도입에 박차를 가하고 있는 실정이다. 그러나, 선박의 LNG 연료공급을 위한 극저온 펌프 (Cryogenic Pump) 제작의 국내 기술력은 매우 미흡한 현실로서 핵심 부품의 설계와 제작기술이 절실한 시점이다. 그리하여, 본 연구는 선박용 LNG 공급시스템용 극저온 잠액식 원심펌프의 핵심부품인 로터에 대하여 기술하고자 한다. 따라서, 재료선정을 위한 실험적 및 해석적 방법을 통한 최적결과를 도출하여 기술개발의 기초자료로 활용하고자 한다.

• Journal of Korea Trade
• /
• 제26권1호
• /
• pp.113-125
• /
• 2022

Purpose - The primary purpose of this study is to verify whether the target set out by the International Maritime Organization (IMO) for reducing carbon emissions from ships can be achieved by quantitatively analyzing the trends in technological advances of fuel oil consumption in the container shipping market. To achieve this purpose, several scenarios are designed considering various options such as eco-friendly fuels, low-speed operation, and the growth in ship size. Design/methodology - The vessel size and speed used in prior studies are utilized to estimate the fuel oil consumption of container ships and the pace of technological progress and Energy Efficiency Design Index (EEDI) regulations are added. A database of 5,260 container ships, as of 2019, is used for multiple linear regression and quantile regression analyses. Findings - The fuel oil consumption of vessels is predominantly affected by their speed, followed by their size, and the annual technological progress is estimated to be 0.57%. As the quantile increases, the influence of ship size and pace of technological progress increases, while the influence of speed and coefficient of EEDI variables decreases. Originality/value - The conservative estimation of carbon emission drawn by a quantitative analysis of the technological progress concerning the fuel efficiency of container vessels shows that it is not possible to achieve IMO targets. Therefore, innovative efforts beyond the current scope of technological progress are required.

• 디지털융복합연구
• /
• 제11권2호
• /
• pp.407-412
• /
• 2013

레저용 선박의 디자인 트렌드는 해양문화와 선박의 연관관계 속에서 발전되어 왔다. 본 연구에서는 선진 해양문화를 보유한 국가들의 레저선박 디자인 트렌드를 분석하였으며, 국내 고객들의 감성을 반영할 수 있는 전기 보트 디지털 디자인 프로세스를 제안하였다. 본 연구의 결과는 경제위기의 여파를 겪고 있지만 친환경 레저 산업 분야에서 새로운 기회를 맞고 있는 국내 중소형 조선 산업 발전에 도움이 될 수 있을 것으로 생각된다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2012년도 전력전자학술대회 논문집
• /
• pp.117-119
• /
• 2012

Plasma Water Treatment, a Unique System(PLATUS) of algae(Chl-a) removal efficiency is average 90.6 up to 99.6%, It is cost effective facility because it doesn't need any other chemicals and consumables. Also, It is Eco-friendly installation with no sludge. It is easy to transform its treatment capacity by the number of Plasma installation. As it requires small space for installing, It can be installed in Land nearby water, vehicle mounted, and set on the ship.

• 한국가시화정보학회지
• /
• 제19권1호
• /
• pp.57-61
• /
• 2021

In order to determine erythrocyte sedimentation rate (ESR) indicating acute phase inflammation, a Westergren method has been widely used because it is cheap and easy to be implemented. However, the Westergren method requires quite a long time for 1 hour. In this study, a gated recurrent unit (GRU) neural network was used to reduce measurement time of ESR evaluation. The sedimentation sequences of the erythrocytes were acquired by the camera and data processed through image processing were used as an input data into the neural network models. The performance of a proposed models was evaluated based on mean absolute error. The results show that GRU model provides best accurate prediction than others within 30 minutes.

• 한국항해항만학회지
• /
• 제43권2호
• /
• pp.86-92
• /
• 2019

IMO has enacted a convention that air pollution due to emissions of ships and sulfur oxides emissions should be significantly reduced by 2020. Based on the current support policies, this work intended to draw up the government support plans required by the shipping companies. Analytic Hierarchy Process analysis was done with factors derived from brainstorming and literature studies. The analysis results showed that the cost factor was generally the most important criterion and the Financial Aid was relatively more important within this cost factor. The policy implications for the regulation of sulfur oxides emissions was provided.

• 반도체디스플레이기술학회지
• /
• 제18권1호
• /
• pp.42-47
• /
• 2019

The four different polymer compounds were manufactured to make cable sheath for ship industry. Two kinds of ethylene-vinyl acetate (EVA) were selected as main matrix polymers for compounding with fire retardant, crosslinking agent, filler, plasticizer, and other additives. The properties of the four compounded materials were investigated with the contents of fire retardant, silane coated aluminum hydroxide (S-ATH). Rheology, Mooney viscosity, and tensile strength increased with S-ATH contents by reinforcing effect. With increasing fire retardant amount, fire resistance increased, but cold resistance didn't show an obvious enhancement due to polar effect of vinyl acetate in EVA.

• Smart Structures and Systems
• /
• 제33권3호
• /
• pp.217-225
• /
• 2024

In this study, an electromagnetic dynamic vibration suppressor and energy harvester is designed and studied. In this system, a gear mechanism is used to convert the linear motion to continuous rotary motion. Governing equations of motion for the system are derived and validated using the experimental results. Effects of changing the main parameters of the presented system, such as mass ratio, stiffness ratio and gear ratio on the electro-mechanical behavior of system are investigated. Moreover, using so-called Weighted Cost Function, the optimum parameters of the system are obtained. Finally, it is shown that the presented electromagnetic dynamic vibration absorber not only can reduce the undesired vibration of the main system but also it can harvest acceptable electrical energy.