• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.2
• /
• pp.60-67
• /
• 2018

Recently, environment-friendly cultivation technology is popular. A cultivator is useful for turning over the stall bedding in a poultry farm. In this study, a rotary-based cultivator with a rechargeable battery was developed for eco-friendly management of broiler chickens. From the results of the test run, the clustered stall bedding was approximately divided into up and down layers. Through experimental evaluation, the working width was more than 60 cm, and the noise was less than 80 dB. The output of the motor was 400 W, and the speed of rotation was 3000 rpm. Electric battery type cultivators are expected to be widely used in the livestock industry.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.2
• /
• pp.186-193
• /
• 2018

Generally, it is difficult to operate moveable-weir due to the expensive cost of the facility management and manpower consumption. Also, when it is installed in a remote area, there is a problem that the cost of connection for power system increases as well as the operating cost. Therefore, this paper proposes an optimal design algorithm to replace an existing power system with an Eco-friendly power supply system for movable-weir using PCS, PV module and lithium-ion battery. Also, this paper proposes a modeling method of environment-friendly power supply system for a movable-weir based on the PSCAD/EMTDC S/W and implements 5[kW] prototype environment-friendly power supply system. As a result of the performance test using the S/W modeling and the prototype system, it is confirmed that the proposed system has stable characteristics in the independent operation mode and the interconnection mode.

• KIEAE Journal
• /
• v.4 no.3
• /
• pp.171-178
• /
• 2004

In recent years, the objective information for the environmental effect of architecture will be furnished to the designer and inhabitant in order to minimize an excessive energy consumption and environmental loads by buildings. In addition, an environmental friendly architectural certification program for a residence, office, and school facilities have been operated to spread and supply environmental friendly architecture. Most of the environmental friendly architectural certification programs proposed in the country are focused on the aspect of the physical environments of architecture in its certification ranges. In the case of a foreign country, however, the certification ranges of an environmental friendly architectural certification program for the school facilities among the programs will be extended not only to the standards for architectural design, environmental aspect, and maintaining and management basis by considering the characteristics of educational effects for students but also to the curriculum, policy of environment, and roles of local community facilities by reflecting a social aspect. Therefore, this study proposes a design and evaluation method by considering an ecological element that will satisfy the requirement for educational well-being that includes not only the requirement for school facilities according to the development of a new curriculum like a space for teaching and learning but also the improvement of the quality of educational environments and the objective of an ecological school.

• The Journal of Fisheries Business Administration
• /
• v.51 no.1
• /
• pp.53-66
• /
• 2020

The Ministry of Maritime Affairs and Fisheries is supporting the "Environmentally Friendly Fisheries Promotion and Private Assistance Project" to increase production of eco-friendly, high-value-added foods. Private-backed operators selected for the project will have an economic opportunity to build, expand or refurbish eco-friendly fishing grounds. To facilitate this, the scope of project support was expanded after 2015 and an opportunity was prepared for private subsidy projects to grow to a new level in terms of quality and quantity by switching to a public offering project. However, starting in 2017, demand from the private sector will plunge and selected projects will be delayed or the project implementation rate will be lowered. It was a time for subsidy-related laws and systems to be reinforced but private subsidy projects do not temporarily shrink simply due to the increased administrative burden on private subsidy operators on subsidy management. It plans to review the correlation between laws and systems related to the construction of fish farms and suggest ways to enhance the efficiency of implementation so that economic advantages, the biggest advantage of the private subsidy project, can be recovered within the current legal system.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.85-92
• /
• 2008

Demolition work is a precedence activity that is performed earlier than other remodeling activities. And demolition work is one of the critical path activities. So, demolition work is needed for systematic plan and management. However, contractors of the remodeling project established a rough plan and did not consider recycling wastes, safety of workers and structural stable of building. To improve this problem, a eco-friend process model of remodeling project is needed to be established. The process model is composed of five phases; 1) survey and analysis of general condition of demolition work, 2) prepare documents of demolition work 3) establishing demolition work plan, 4) demolition and inspection, 5) post-demolition management. Especially, demolition documents are based on establishing WBS, selecting the equipment and method, waste management and structure reinforcement. A process model of eco-friend demolition work is developed by using IDEF0 method.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.28 no.2
• /
• pp.5-34
• /
• 2017

This study measured greening level on the 978 public libraries nationwide, making and distributing questionnaires based on green library evaluation indicators developed to measure the greening level of public libraries. As a result of analyzing the averages by evaluation area, among the green library evaluation areas, the whole average of the library resources was the highest by 1.93, and followed by land use and traffic 1.81, indoor environment 1.30, management of water circulation 1.20, etc. The greening evaluation area which shows the best strength in the surveyed public libraries, was the area of the library resource, and it turned out that it use spaces effectively like effective use of the entire area, effectiveness of conservation of books, use and management of eco-friendly products etc., or use the equipments in eco-friendly way which are purchased or used frequently in the libraries, and, as for the land use and traffic area, most of the libraries had bicycle racks, and chose the location of the libraries, considering accessibility to public transportation and a distance between central urban area and libraries. Also, it turns out that, in the area of materials and resources, most of the libraries were equipped with hand dryers and rolling towels and maintained the eco-friendly view.

• Korean Journal of Construction Engineering and Management
• /
• v.23 no.6
• /
• pp.111-118
• /
• 2022

Recently, as underground facilities buried under roads in Korea are aging, the amount of underground facility maintenance work is rapidly increasing. For the maintenance and management of such underground facilities, the cutting work of the road pavement should be preceded. However, the conventional road pavement cutters used in Korea are not eco-friendly, and the reality is that they generate a lot of noise and cutting sludge (scattering dust). Therefore, in this study, the concept of the cutting sludge recovery device was derived, and an eco-friendly pavement cutter including this function was designed and manufactured. The developed equipment took about 20 to 30 seconds to cut 1m to a depth of 100 to 150mm. Also, the sludge suction performance was good in most sections, and the noise level of the equipment briefly measured at a distance of 2m was 82.7dB on average. However, due to the limitation that the developed equipment was at the level of the first prototype, the driving stability was somewhat low, and equipment abnormalities such as engine shutdown and sludge recovery performance decreased in some cases. The cutting performance and sludge recovery function will be more stable through tuning and improvement of the developed prototype in the future. In addition, we plan to quantitatively compare and analyze productivity by applying the improved prototype to actual field conditions.

• Research in Plant Disease
• /
• v.24 no.4
• /
• pp.292-301
• /
• 2018

Alternaria leaf spot disease has been a concern during a tomato production in greenhouse. In vitro antifungal activities of vapours of four plant essential oils, cinnamon oil, fennel oil, origanum oil and thyme oil, were investigated during in vitro conidial germination and mycelial growth of Alternaria alternata causing the tomato leaf spots to find eco-friendly alternatives for chemical fungicides. The four plant essential oils showed different antifungal activities against in vitro conidial germination of A. alternata in dose-dependent manners, and cinnamon oil vapour was most effective to suppress the conidial germination. The four plant essential oils showed similar antifungal activities against the in vitro mycelial growth of A. alternata in dose-dependent manners, but low doses of thyme oil vapour slightly increased in vitro mycelial growth of A. alternata. Necrotic lesions on the A. alternata-inoculated tomato leaves were reduced differently depending on kinds and concentrations of plant essential oils. Delayed conidial germination and germ-tube elongation of A. alternata were found on the tomato leaves treated with cinnamon oil and origanum oil vapours at 6 hpi. These results suggest that volatiles from cinnamon oil and origanum oil can be provided as alternatives to manage Alternaria leaf spot during the tomato production eco-friendly.

• International Journal of Computer Science & Network Security
• /
• v.22 no.1
• /
• pp.85-92
• /
• 2022

In this article, we look at the application of BIM (Building Information Modeling) in sustainable infrastructures. In response to global warming, energy shortages, and environmental degradation, people are trying to build eco-friendly, low-carbon cities and promote eco-friendly homes. A "green" building is the entire life cycle of a building that includes maximizing the conservation of resources (energy, water, land, and materials), protecting the environment, reducing pollution, providing people with healthy, comfortable, and efficient use of space, and establishing harmony between nature and architecture. In the field of ecological and sustainable buildings, BIM modeling can be integrated into buildings with analog energy, air flow analysis, and solar building ecosystems. Using BIM technologies, you can reduce the amount of waste and improve the quality of construction. These technologies create "visualization" of digital building models through multidimensional digital design solutions that provide" modeling and analysis "of Scientific Collaboration Platforms for designers, architects, utility engineers, developers, and even end users. Moreover, BIM helps them use three-dimensional digital models in project design and construction and operational management.

• Journal of Distribution Science
• /
• v.15 no.2
• /
• pp.69-78
• /
• 2017

Purpose - As recently social contributions of firms are positioned as key strategic actions, it is demanding to review the effects of social contributions on overall corporate management. The research aims to effects of social contributions on social values and word of mouth in firm level and product level. Further roles of consumer identification with firm and product eco-friendliness are also analyzed. Research design, data, and methodology - The paper conducted a survey in which two scenarios are used for manipulating the degree of corporate social contributions. The survey sample consist of 165 undergraduate and graduate students in a university, located in Seoul. For analyzing data, analysis of variance is applied, in conjunction with analysis of moderating effects, through version 23 of SPSS statistical package. Results - In the firm level, social contributions by firms have a positive effect on social values of firms. Consumer identification showed a moderating role in the effect. Social value of the firm with passive social contribution perceived by respondents with a high degree of identification was higher than social value of the firm with active social contribution perceived by respondents with a low degree of identification. Corporate social value has positive effect on word-of-mouth of firms. In the product level, social contributions by firms has a positive effect on social values of product. Product eco-friendliness showed a moderating role in the effect. For eco-friendly product, social values are higher in the firm with active social contributions than in the firm with passive social contributions. However, for non eco-friendly product, the difference in social values between the two firms does not exist. Product social values has positive effect on intention for WOM of products. WOM of eco-friendly products with low social value showed no difference with WOM of non eco-friendly products with high social value. Conclusions - These results imply that firms should enhance consumer identification with firm in making social contributions for optimizing corporate social value and enhancing word-of-mouth(WOM). Managerial implications of the results suggest it would be more effective to improve social value of product by active social contributions for increasing word-of-mouth(WOM) of product.