• 오토저널
• /
• 제14권6호
• /
• pp.81-90
• /
• 1992

This paper deals with an experimental study on the initial condition of liquid film surface waves disintegration and investigation on the behavior of liquid film surface waves formed by the high speed air flow on the solid plane surface. The authors conducted the qualitative and quantitative study to in vestigate the liquid film flow phenomena, the liquid film disintegration mechanism, and droplet formation process with breaking the liquid film surface wave. The newly devised transparent rectangular test section which has semi-two-dimensional flow at the center of the bottom was introduced to perform the experimental study, and it can generate the uniform thickness liquid film at the bottom. The strobo streak camera was used to obtain the instantaneously transformed photographs. The electronic measuring device was also used to measure the liquid film thickness variation in order to perform the easy and effective analysis of complex flow phenomena in the air-water cocurrent flow.

• 대한조선학회논문집
• /
• 제44권1호
• /
• pp.48-54
• /
• 2007

Higher productivity and less cost during the manufacturing process of ships are required to maintain international competitiveness of modern shipbuilding industries. The integrated hull/ outfitting/ painting scheduling(IHOP) process is a final point, where logistics are finally being integrated and upcoming schedules are made. Therefore, more profits are expected from IHOP by effective management. In this thesis, IHOP is proposed in order to solve how to choose block erection date with IHOP scheduling logic. The result of IHOP scheduling is highly advised to utilize fabrication, outfitting shops. A standardized operation and load of resource will eventually be applied in long-term time span point of view for this will make it easy to enable capacity planning and workforce planning. It is also expected to eliminate inefficiency in overtime work and efficiently utilize manpower in short-term.

• 약학회지
• /
• 제38권1호
• /
• pp.12-19
• /
• 1994

Capsaicin(8-methyl-N-vanillyl-6-nonenamide) is the principal pungent component of Capsicum fruits. This work is directed to the capsaicin-hydrolyzing enzyme playing a key role in the rate limiting and critical step of capsaicin metabolism. In order to get precise information on the enzyme's subcellular location, rat liver homogenate was divided into six subcellular fractions by differential centrifugation technique: crude nuclear pellet, PNS(post nuclear supernatant) fraction, lysosomal pellet, cytosol, Tris wash fraction, micrisomes. Capsaicin-hydrolysing enzyme activity was analysed by high performance liquid chromatography(HPLC). This enzyme was found at the highest specific activity in the microsomal fraction and co-distributed with marker enzymes of the endoplasmic reticulum, NADPH-cytochrome c reductase and nucleoside diphosphatase. This is compatible with the result of ninhydrin color reaction of vanillylamine, primary metabolite of capsaicin hydrolysis, on thin layer chromatography(TLC). This enzyme is most active at pH $8.0{\sim}9.0$. Definite subcellular location of this enzyme will make it easy to proceed with further study.

• 대한전기학회논문지
• /
• 제40권1호
• /
• pp.58-66
• /
• 1991

In inverters, time delays are inserted in the switching signals to prevent the dc lind shortage. This causes detrimental effects on the performance of the inverters, that is, the fundamental voltage drop and the generation of low order harmonics. This paper derives simple formula to describe the time delay effects in PWM inverters, where the effects may become significant because of relatively high switching frequencies. To compensate the tice delay effects, this paper presents two methods which are suitable for sinusoidal PWM and memory-based PWM respectively. Both are simple, easy to implement, and are shown to be effective, through the experiments, in improving the output waveform of PWM inverters.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 F
• /
• pp.1924-1926
• /
• 1997

With the development of power electronics, many new energy storage systems such as the superconducting magnetic energy storage, the flywheel energy storage, and the capacitive energy storage, etc. are being intensively studied recently in order to replace battery in some special applications, Among these innovative energy storage systems, the flywheel system exhibits some unique features such as high power density, easy maintenance and longer lifetime. This paper introduces the novel flywheel energy storage system. Operation and features of the system are illustrated and verified on a 6kVA, 20kHz IPM based experimental circuit for O/A application. The Halbach Array Motor is selected of the design of the three phase motor/generator for the flywheel energy storage system.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권3호
• /
• pp.588-594
• /
• 2001

The aim of this paper is to develop the low temperature vacuum dryer, with low initial investments and operating costs, easy operating method and trouble-free operation Usally operations just below atmospheric pressure, as with direct dryers, but some are built for vacuum operation with pressure as low 50 mmHg abs. The lowers the boiling point to $39^{\circ}C$ The experimental data of quantitative analysis for using practically were obtained by the constant drying rate period and reducing drying rate period according to the temperature of hot water which is the experimental parameters of present experiment. As the results, it took about 20 hours for material to reach about 18% of the final moisture content is order to store products for a long time about 450% of the early moisture content at the beginning of drying and maximum drying rate comes to about 0.30 kg/m2hr at about 350% of the moisture content.

• 전자공학회논문지B
• /
• 제33B권3호
• /
• pp.109-119
• /
• 1996

We propsoed a multiplexed optical correlation filter method for an optical parallel addition based on symbolic substitution. In the proposed mthod, we used redundant binary number which was easy to minimize the number of the symbolic substitution rules. We chose MACE filter which had very low sidelobes and good correlation peak compared with SDF filter as the optical correlation recognition filter and encoded input numbers properly to increase the discrimination capability. In order to minimize the number of symbolic substitution rules, sixteen input patterns were divided into six groups of the same addition results and six filters for recognizing the input patterns were used. these filters were multiplexed in two MMACE filter planes and the corresponding substitution method was proposed. Through the computer simulation, we confirmed the proposed method was suitable to implement the optical parallel adder.

• 산업경영시스템학회지
• /
• 제19권40호
• /
• pp.143-155
• /
• 1996

Presented in this paper are a CAPP(Computer Automated Process Planning) scheme and a generating method of intelligent NC data for unmaned machining of mold die. Mold die surfaces usually have free-formed geometry of complex shapes. So it is easy to overcut the die surface and to overload the cutting tools. It takes tens of hours to prepare process plans and to generate NC data for each processes. Therefore a classification of unit machining operation(UMO) for mold die manufacture, a backward recursive capp algorithm and a generating method of intelligent NC data are presented in this paper in order to provide a unmaned machining architecture of mold die.

• 한국지역사회생활과학회지
• /
• 제15권4호
• /
• pp.165-175
• /
• 2004

Food is very important for human being. It is not easy for us to enjoy good life because the situation of food is not good in Korea. The self-sufficient food rate is very low and most of food which we take was produced by industrial agriculture. Food of this kind has some problems with respect to the health of consumer, agriculture, environment and community. In order to secure the true food which is safe and environmentally sound, producers, consumers and community have to work together. Producers must engage in environmental agriculture. They must produce the true food and need to know regional consumers. Consumers must pay attention to the regional agriculture and must participate the production of true food. Local government must open farmers' markets for direct marketing between farmers and consumers. NGOs should educate and organize the producers and consumers.

• 생명과학회지
• /
• 제12권4호
• /
• pp.383-391
• /
• 2002

The difficulties in dealing with the Bioinformatics data come more from its idiosyncrasies than from its quantity Currently researchers need to an easy method for data exchange, manage, update. In order to integrate and manage all kinds of biological data, it is reasonable to adopt XML as standard tool since XML is independent of operating system, programming language and hardware platform. Although XML in Bioinformatics has been used widely as a standard notation abroad, however it is the beginning step in the domestic research. This article reviews a basic concept of XML and how to apply XML modeling in Bioinformatics. In addition we present XML applications for genomic sequences, structures and genetic network modeling.