• Korean Journal of Human Ecology
• /
• v.20 no.1
• /
• pp.169-182
• /
• 2011

The purpose of this study was to research the purchasing patterns and the ease amount of woman's T-shirts. For the study, 215 women between the ages of 18 and 59 were surveyed. 18~34 year old women had more T-shirts and wore them more frequently than 35~59 year old women. Women usually gave weight to design, fabric, fit and color, when they bought T-shirts. The most important fit part was different according to age groups, 18~34 women valued T-shirts length but 35~59 women valued bust circumference ease. The ease of T-shirts was analysed with body sizes. Shoulder ease were distributed between -3~3cm, neckline designed apart 0.5~7.0cm from side neck point, 0~11cm from front neck point and 1~2cm from back neck point. The means of bust ease, waist ease and hip ease were 6.2cm, 14.7cm and 4.5cm. The bust and waist ease were significantly different between age groups and 35~59 year old women wore more tightly at both parts due to their thick torso. Women accepted smaller ease at hip while didn't want small ease at waist. The eases of shoulder, bust and T-shirts length were the most important and influencing.

• The Research Journal of the Costume Culture
• /
• v.9 no.1
• /
• pp.33-43
• /
• 2001

In this study, both kinds of materials, that is, leather and woolen fabrics, which have similar thickness, have been adopted. To determine proper length of ease, not only sleeve cap height but also sleeve width has been adjusted mainly based on 5cm length of the ease, which follows maximum sleeve cap height, and then different length of ease, for example, 4cm, 3cm, 2cm and 1cm of ease, have been made. As a result, eighteen kinds in total of sleeves have been made: In other words, each nine kinds of both leather and woolen fabrics have different ease lengths. In addition, each sleeve has been inspected visually and functionally. Following conclusion has been gotten based on outcome of the study: 1. Proper ease length for manufacture of leather garment is said to be 1∼2 cm. As a result, ease length with higher sleeve cap height shall be 1∼2cm, while the length with lower sleeve cap height shall be 1cm or less. 2. Wider sleeve width has better function. Considering relations with sleeve cap height, sleeve width shall exceed +4cm of bicep line. 3. to satisfy a variety of those conditions while manufacturing leather garment, sleeve cap height, which is used for the manufacture of full dress and street wear garment, To lessen the ease length, body A.H shall be relatively loose under the arms, or pad shall be supplemented on the shoulder, so that the difference had better be lessened to solve such problems.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.1 s.139
• /
• pp.91-102
• /
• 2005

The purpose of this study was to investigate the range of variation for commonly accepted ease in a business jacket and thus to find solutions to the problem of fit and ease in ready-to-wear jackets. This study was based on anthropometric measurements, pattern measurements, which were used to calculate ease amount according to each jacket part. The survey subjects were 493 males, between 25 to 59 years old, buying a jacket at stores in Seoul. In the results, the aesthetic purpose of a business jacket(custom-fit jacket) was clearly observed by the means of controlling the ease amount at chest, waist and hip. The ease at chest and waist(ready-to-wear) clearly revealed a difference among prototypes. This result can be explaned by the regular drops and the similar length-width proportions between sizes in ready-to-wear Jackets. Therefore, customers with varying body drop differences, who had to choose a homogeneous jacket drop, experienced too much ease at the Waist and Hip compared with custom-fit customers. In addition, the height could be an integral factor to affect the ease of jacket length and sleeve length. The ease at these parts was significantly different among height groups and showed negative relationships.

• The Research Journal of the Costume Culture
• /
• v.5 no.2
• /
• pp.253-267
• /
• 1997

In this study, the comfortable as well as good-looking overall patterns were investigated. For proposing the proper ease of the overall, 9 types of experimental overall, that had the ease of different size and position, were made. The appearance of experimental overall No. 5, that had total 10.5㎝ ease in the back, was better than the others. The position of ease affected the appearance of overall. Experimental overall No. 9, that had total 12.5㎝ ease in the back, was better than any others in comfort. The position of ease was not important in comfort. From these results, it was proposed that the proper ease size increased the both comfort and appearance. The paper ease sizes, to gain the comfort and good-looking overalls pattern, were 3.5㎝ in the center-back waist and 2㎝ in the end of crotch to the outside.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.36 no.1
• /
• pp.112-125
• /
• 2012

This study researches the preferred ease of torso sloper according to body sizes and drop. For this, the eases of main body parts such as chest circumference, waist circumference, hip circumference, biacromion length, and waist back length were analysed; in addition, the drop differences of body and pattern were explored to find out characteristics of silhouette changes. The subjects were 55 women in their early 20s (aged from 20 to 24) and individual torso block made with muslin was corrected 1-3 times by a personal fitting. There were 3 meaningful results. First, the preferred ease were individually various; however, the eases of all torso blocks should be same at the pattern making step. Second, the eases were also significantly different among body size groups and the bigger group preferred less ease at the biacromion length, waist back length, armhole-depth, chest circumference, and waist circumference. Third, the eases of chest circumference and hip circumference were significantly changed among drop groups. To change their body drop, H-shape drop adopted less ease at chest circumference and more ease at hip circumference; however, A-shape drop adopted more ease at chest circumference and less ease at hip circumference.

• Fashion & Textile Research Journal
• /
• v.10 no.5
• /
• pp.636-643
• /
• 2008

The purpose of this study was to establish the proper amount of eases according to the body type of men's bodice basic pattern. The 3 subjects in 30's men were selected for developing fitted pattern for each type. And the results of the wearing test for individual subject by distributing ease amount are as follows. The wearing test is administrated by a division of 12cm, 15m, and 18cm areas respectively after separating the fitted pattern for each type in a vertical and horizontal ways. There exists a significant difference in ease according to the measures of chest circumference of subjects. Also, it is shown that the more comfortable in function, the better visible in appearance as the ease gets proper. As to regions, the amount and ratio of ease chest circumference are increased in proportion to the size of the chest circumference. The scye depth is affected by the ease of chest circumference, while the ease of the interscye and the back breadth are lessened due to the effect of their appearances. And the side breadth is required as a buffer to complement the shortage of the interscye and the back breadth because the ease of either the interscye or the back breadth is partially transferred in motion.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.7
• /
• pp.170-180
• /
• 2000

In this paper, to evaluate ease of exchange of subassembly considering module, it needs to analyze structure and function of subassembly, assembly and disassembly process. Exchange process of module can be divided into pre-process and in-process, and determination factors of exchange process are defined by analyzing characteristics of assembly and disassembly process. Based on the analysis of characteristics for structure and function of subassembly, influential factors of module can be proposed. Considered the interrelationship between determination factors of ease of exchange and influencing factors of module, ease of exchange can be evaluated.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.6
• /
• pp.955-968
• /
• 2010

Three-dimensional body data has been used in many industry fields including the apparel industry. This research used data from a study of the changes in lower body girth measurements from a 3D scan study of 25 female subjects aged 18 to 24 in four postures; a standing posture, a $120^{\circ}$ knee bend posture, a one pace stepping posture, and a sitting posture with a $90^{\circ}$ knee bend. We used the information on the difference between standing and seated measurements to adjust ease values for pants patterns an evaluation of the appearance, and the comfort of the pants. Waist girth in the sitting posture increased 8% compared to a standing posture and the hip girth measurement increased 7%. A basic pants pattern (pants A) with 2.4cm ease at the waist and 2.6cm ease at the hip was developed and a pants pattern (pants B) was developed using the rates of lower body girth change with a 5.7cm ease (8% change) at the waist and 7cm ease (7% change) at the hip. The appearance assessment items of pants A in a standing posture were higher than pants B. On the other hand, most appearance assessment items of pants B in a sitting posture were higher than pants A, especially the ease of pants back waistline and the appearance of the whole back. Comfort assessment items of pants B in both standing and sitting postures were higher than the comfort assessment items for pants A, especially the location of pants waistline, the ease of pants at the waistline, and the ease at the abdomen. In order to find the best level of ease for better appearance and comfort in both standing and sitting postures, 20 pants were constructed with ease values at the waist and hip in increments of 1.1cm in the range between the ease values of pants A and pants B. A fit test was conducted to compare the average appearance and comfort ratings that identified the pants with the best ease values at the waist and hip. The highest total mean was achieved in the pants with a waist ease of 4.6cm and hip ease of 4.8cm.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.5
• /
• pp.909-937
• /
• 2011

Energy efficiency is one of the most critical issues in the design of wireless sensor networks. In object-tracking sensor networks, the data storage and query processing should be energy-conserving by decreasing the message complexity. In this paper, a Prediction-based Energy-conserving Approximate StoragE schema (P-EASE) is proposed, which can reduce the query error of EASE by changing its approximate area and adopting predicting model without increasing the cost. In addition, focusing on reducing the unnecessary querying messages, P-EASE enables an optimal query algorithm to taking into consideration to query the proper storage node, i.e., the nearer storage node of the centric storage node and local storage node. The theoretical analysis illuminates the correctness and efficiency of the P-EASE. Simulation experiments are conducted under semi-random walk and random waypoint mobility. Compared to EASE, P-EASE performs better at the query error, message complexity, total energy consumption and hotspot energy consumption. Results have shown that P-EASE is more energy-conserving and has higher location precision than EASE.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.4 s.152
• /
• pp.582-594
• /
• 2006

The purpose of this study were to develop snow-board lower wear with improved functionality. The study consisted of figure out appropriate ease amount of snow-board lower wear and make products by applying it to pattern design. The results of this study were as follows: On the basis of the analysis of snow-board lower wear on market, 2 pieces of experimental snowboard lower wear were designed, produced, and evaluated the patterns of with different ease, and snowboard lower B for experiment was proved to be better. Snowboard lower wear was produced and evaluated for experiment 2 by giving additional ease to specific parts. Therefore experiment 2 was presented pattern, ease, and size of snowboard lower wear with improved functionality. Sizes and ease of snow-board lower wear for presentation. waist circumference - 96.0cm(l6.4cm, 17.1%); hip circumference - 127.0cm(31.3cm, 24.4%); pants length - 112.0cm(9.6cm, 8.6%); crotch length - 90.0cm(26.8cm, 36.4%); thigh circumference - 78.0cm(23.4cm, 30.0%); knee circumference - 62.0cm(24.7cm, 39.8%); turnup circumference - 62.0cm(36.0cm, 58.1%). Above mentioned sizes and ease of lower wear are medium size(M) for male.