• Title/Summary/Keyword: Earth fault

검색결과 425건 처리시간 0.024초

단층핵의 물리적 특성과 마찰 특성의 상관관계 분석 (Physical Properties and Friction Characteristics of Fault Cores in South Korea)

  • 문성우;윤현석;서용석
    • 자원환경지질
    • /
    • 제53권1호
    • /
    • pp.71-85
    • /
    • 2020
  • 본 연구에서는 지반공학 및 지질공학적 측면에서 단층핵의 거동을 이해하기 위해 화강암, 퇴적암 및 화산암 단층대에서 채취된 단층핵 시료를 대상으로 물리적 특성(각력 및 점토함량, 단위중량, 공극률, 함수비)과 마찰 특성(내부마찰각, 점착력)의 관계를 분석하였다. 실내시험으로부터 산정된 물리적 특성을 분석한 결과, 단층핵 내 각력은 단위중량과 양(+)의 상관관계를 가지고, 점토함량, 공극률 및 함수비와는 음(-)의 상관관계를 가진다. 직접전단시험으로부터 산정된 내부 마찰각과 점착력에 대한 사분위수 범위(IQR)는 각각 16.7-38.1°, 2.5-25.3 kPa로 나타났다. 또한, 단층핵의 마찰특성에 미치는 물리적 특성의 영향을 분석한 결과, 마찰각은 모든 암종에서 각각 각력함량 및 단위중량과 양(+)의 상관관계를 가지고, 점토함량, 공극률 및 함수비와 음(-)의 상관관계를 보인다. 대조적으로, 단층핵의 점착력은 각력함량 및 단위중량과 음(-)의 상관관계를 가지고, 점토함량, 공극률 및 함수비와 양(+)의 상관관계를 보인다.

당진 지역 제4기 진관단층의 운동 특성과 단층비지의 ESR 연령 (Kinematics and ESR Ages for Fault Gouges of the Quaternary Jingwan Fault, Dangjin, western Korea)

  • 최범영;황재하;배한경;이희권;경재복
    • 한국지구과학회지
    • /
    • 제36권1호
    • /
    • pp.1-15
    • /
    • 2015
  • 한반도 서부인 당진 지역에서 새로이 발견된 제4기 진관단층의 운동 특성과 단층활동 이력에 대한 윤곽을 잡기 위해 몇 개의 단층비지대로 구성된 진관단층의 기하 분석과 단층비지 물질에 대한 ESR 연령측정을 하였다. 진관단층은 정단층으로, $N55^{\circ}E$ 주향의 이 단층은 낮은 곳에서는 경사가 $57^{\circ}NW$, 상부로 갈수록 경사가 수직에 가깝게 변화를 보여 주며 리스트릭 단층임을 보여준다. 단층비지대의 두께는 노두 하부의 기반암과 기반암 사이에서 2~3 cm, 중상부의 기반암과 제4기층 사이 경계에서는 20~30 cm 폭으로 보다 두껍다. 후자의 경우에 있어서 3개 이상의 단층비지대가 분리되거나 합쳐지기도 하며, 부분적으로는 서로 중첩되기도 하는데 이는 서로 다른 단층운동 사건들이 있었음을 지시한다. 지질단면도로부터 산출된 단층의 누적 총변위는 약 10 m이며 누적 총변위와 단층의 길이 사이 경험식에 따르면 약 2.5 km의 단층 길이에 해당된다고 할 수 있다. 그러므로 단층의 길이를 제대로 알기 위해 보다 연구가 요구된다. 단층대를 따라 채취한 세 단층암 샘플에 대한 ESR 연령측정 결과, $651{\pm}47$, $649{\pm}96$, $436{\pm}66ka$ 등으로 나타났으며 최소 두번의 단층운동이 있었음을 지시한다. 단층면에서 관찰되는 단층조선은 순전한 경사이동만을 지시하며(정단층 운동), 동북동-서남서 주향의 진관단층은 북북서-동남동 방향의 수평 최소 압축응력 환경에서 단층운동이 있었음을 제시한다.

Active Fault Study of the Yangsan Fault System and Ulsan Fault System, Southeastern Part of the Korean Peninsula

  • 경재복;이기화
    • 지구물리
    • /
    • 제9권3호
    • /
    • pp.219-230
    • /
    • 2006
  • Since the key issue that 'the Yangsan fault is seismically an active fault" was raised in 1983, thegeological and geomorphological studies of active fault have been made by many researchers. These studies are mainly focused on the Yangsan fault system(YFS) and Ulsan fault system(UFS) due to many historical earthquakes occurred in this area. There are two different types of active faultings under the ENE-WSW horizontal stress field in the southeastern part of the Korean Peninsula. The NNE-trending YFS is the most prominent right-lateral strike-slip fault and has a continuous trace about 200 km long. Some part of this system has been active during the late Quaternary with evidences clearly recognized on both the northern (Yugyeri and Tosung-ri areas) and southern parts (Eonyang to Tongdosa area) of the YFS. in the southern part, the estimated vertical slip rate is about 0.02 - 0.07 mm/yr, and the lateral slip rate may be several times larger than the vertical rate. The most recent event occurred prior to deposition of Holocene alluvium, in the northern part, the fault trend locally changes to almost N-S, dips to the east and has reverse movement. The average vertical slip rate is estimated to be less than 0.1 mm/yr. The most recent event probably occurred after 1314 years BP (AD 536). The NNW-SSE (or N-S) trending UFS is a predominantly reverse fault that built up U-ie eastern mountain and has been active during U-ie late Quaternary. The fault trace is not straight but irregularly undulates along the foot of the mountain on the east. From the disturbed terraces along U-ie fault, the average vertical slip rate on U-iis system is estimated to be about 0.08.13mm/yr. The latest event is not well studied, but seems to have occurred after the last glacial maximum in the Malbang fault and 14,000 years BP in the Kalgok fault of the UFS. However, important issues such as fault segmentation, recurrence interval, age of Quaternary deposits need further studies.

  • PDF

단층지진원 확률론적 지진재해도 분석에 관한 고찰 (Review on Probabilistic Seismic Hazard Analysis of Capable Faults)

  • 최원학;연관희;장천중
    • 한국지진공학회:학술대회논문집
    • /
    • 한국지진공학회 2002년도 춘계 학술발표회 논문집
    • /
    • pp.28-35
    • /
    • 2002
  • The probabilistic seismic hazard analysis for engineering needs several active fault parameters as input data. Fault slip rates, the segmentation model for each fault, and the date of the most recent large earthquake in seismic hazard analysis are the critical pieces of information required to characterize behavior of the faults. Slip rates provide a basis for calculating earthquake recurrence intervals. Segmentation models define potential rupture lengths and are inputs to earthquake magnitude. The most recent event is used in time-dependent probability calculations. These data were assembled by expert source-characterization groups consisting of geologists, geophysicists, and seismologists evaluating the information available for earth fault. The procedures to prepare inputs for seismic hazard are illustrated with possible segmentation scenarios of capable fault models and the seismic hazards are evaluated to see the implication of considering capable faults models.

  • PDF

직류 급전시스템에서의 지락고장에 따른 전압상승 시뮬레이션 (Voltage rising simulation due to the ground fault in DC traction system)

  • 정호성;한문섭;박영;정상기;권삼영
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2008년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
    • /
    • pp.215-217
    • /
    • 2008
  • DC fraction system can damage human and other facilities due to the rising of rail potential. Therefore the earth fault detection relay protects system using rail potential induced in train operation and ground fault. However the conventional protection system cannot operate due to the fault resistance and might operate unwanted voltage rising due to the other substation ground fault. So this paper models DC traction system using PSCAD/EMTDC and simulates the rail potential rising. We can estimate the rail potential rising in DC traction system through the various simulation.

  • PDF

병행 2회선 송전선로에서의 고장점 표정 알고리즘 (A Fault Location Algorithm of a Double-Circuit Line)

  • 안용진;최면송;강상희;이승재
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1999년도 추계학술대회 논문집 학회본부 A
    • /
    • pp.255-257
    • /
    • 1999
  • Fault location algorithms based on the current distribution factors under the one-phase to earth fault condition of a double-circuit line are presented. The derivation method for current distribution factors is showed, to calculate fault current, fault resistance and the zero sequence current of other parallel circuit which are unknown. As the proposed algorithms 1,2,3 embodies an accurate location by the voltage and the current of the relaying point.

  • PDF

무선충전 전기자동차 전력공급장치에서의 지락사고 특성 분석 (Analisys about the Earth Fault Characteristics in the Wireless Power Transmission System of the Electric Vehicle)

  • 정진수;한운기;박찬엄;송영상;임현성;조민호;유지연
    • 조명전기설비학회논문지
    • /
    • 제28권12호
    • /
    • pp.13-17
    • /
    • 2014
  • In this paper, the risk of electric shock is analyzed through analysis for characterization of potential distribution analysis and ground fault current analysis near the area where there are occurred a ground fault at electric vehicle wireless charging system using 20kHz. Studies for electric vehicle wireless charging system are in the works for development of efficiency increase, pickup shape design and communication module as a fundamental research step. But the research related to electrical safety and is still scarce state so that more studies are necessary to commercialize. As a result of analysis, it is verified that induced voltage is arisen more up to 45V near the a area of accident during ground fault and fault current has been maintained continuously without clearing fault condition by operating characteristics for circuit breaker and inverter.

1996년 양산단층 일대의 미소지진을 이용한 복합단층면해 (A Composite Fault-plane Solution of Microearthquakes in the Yangsan Fault Area during 1996)

  • 이기화;정태웅
    • 지구물리
    • /
    • 제2권4호
    • /
    • pp.235-240
    • /
    • 1999
  • 1995-96년 양산단층 지역의 한국자원연구소 지진관측망에 기록된 미소지진을 복합단층면해의 방법으로 해석하였다. 양산단층 지역에서는 주향 15 ± 3도에 경사 60 ± 8도, 면선각 140도의 역단층이거나, 북서-남동 방향, 즉 주향 128 ± 3도, 경사 56 ± 8도, 면선각 37도의 역단층으로 분석되었다. 응력의 주압축 방향은 동북동-서남서 방향이고 이 응력에 의해 단층은 역단층 운동이 포함된 주향이동을 이루는 것으로 추정된다. 이 방향은 영월지진을 비롯, 이전 연구에서 구해진 한반도 주변의 응력장 방향과 유사하다.

  • PDF

Kinematic Interpretation for the Development of the Yeonghae Basin, Located at the Northeastern Part of the Yangsan Fault, Korea

  • Altaher, Zooelnon Abdelwahed;Park, Kiwoong;Kim, Young-Seog
    • 지질공학
    • /
    • 제32권4호
    • /
    • pp.467-482
    • /
    • 2022
  • The Yeonghae basin is located at the northeastern part of the Yangsan fault (YSF; a potentially active fault). The study of the architecture of the Yeonghae basin is important to understand the activity of the Yangsan fault system (YSFS) as well as the basin formation mechanism and the activity of the YSFS. For this study, Digital Elevation Model (DEM) was used to highlight the marginal faults, and structural fieldwork was performed to understand the geometry of the intra-basinal structures and the nature of the bounding faults. DEM analysis reveals that the eastern margin is bounded by the northern extension of the YSF whereas the western margin is bounded by two curvilinear sub-parallel faults; Baekseokri fault (BSF) and Gakri fault (GF). The field data indicate that the YSF is striking in the N-S direction, steeply dipping to the east, and experienced both sinistral and dextral strike-slip movements. Both the BSF and GF are characterized dominantly by an oblique right-lateral strike-slip movement. The stress indicators show that the maximum horizontal compressional stress was in NNE to NE and NNW-SSE, which is consistent with right-lateral and left-lateral movements of the YSFS, respectively. The plotted structural data show that the NE-SW is the predominant direction of the structural elements. This indicates that the basin and marginal faults are mainly controlled by the right-lateral strike-slip movements of the YSFS. Based on the structural architecture of the Yeonghae basin, the study area represents a contractional zone rather than an extensional zone in the present time. We proposed two models to explain the opening and developing mechanism of the Yeonghae basin. The first model is that the basin developed as an extensional pull-apart basin during the left-lateral movement of the YSF, which has been reactivated by tectonic inversion. In the second model, the basin was developed as an extensional zone at a dilational quadrant of an old tip zone of the northern segment of the YSF during the right-lateral movement stage. Later on, the basin has undergone a shortening stage due to the closing of the East Sea. The second model is supported by the major trend of the collected structural data, indicating predominant right-lateral movement. This study enables us to classify the Yeonghae basin as an inverted strike-slip basin. Moreover, two opposite strike-slip movement senses along the eastern marginal fault indicate multiple deformation stages along the Yangsan fault system developed along the eastern margin of the Korean peninsula.

혼합 가중치를 적용한 보강토 옹벽의 상태평가항목 가중치 평가 (Weighting Value Evaluation of Condition Assessment Item in Reinforced Earth Retaining Walls by Applying Hybrid Weighting Technique)

  • 이형도;원정훈;성주현
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제21권5호
    • /
    • pp.83-93
    • /
    • 2017
  • 본 연구에서는 보강토 옹벽 점검 자료를 바탕으로 보강토 옹벽의 상태평가항목의 가중치를 새롭게 제안하고 결함점수 및 결함지수를 제안하였다. 161개소의 보강토 옹벽의 점검결과를 근거로 다중회귀분석과 엔트로피 기법을 이용하여 상태평가항목별 가중치를 산정하였으며, 또한 전문가를 대상으로 AHP 기법을 활용하여 평가항목별 가중치를 산정하였다. 각 기법에서 도출된 가중치를 활용하여 혼한 가중치를 제안하였으며, 제안 가중치를 토대로 결함점수 및 결함지수를 제안하여 기존 161개소 현장에 적용하여 현재의 가중치와 제안 가중치에 의한 현장별 위험도 순위를 비교 분석하였다. 다중회귀분석, AHP 기법, 엔트로피 기법을 활용하여 분석한 결과 상태평가항목의 가중치 순위가 변동이 컸으며, 현재 상태평가항목의 가중치와 달리 가중치 순위의 중복은 발생하지 않았다. 특히, 다중회귀분석 결과에서는 특정 상태평가항목이 전체 가중치의 70% 이상을 차지하는 결과가 도출되었다. 제안한 혼합 가중치를 기존 보강토 옹벽 데이터에 적용한 결과, 상태평가항목의 가중치 중복은 발생하지 않았으며, 대상 보강토 옹벽 161 개소 중 16 개소의 위험도 순위 상승과 31 개소의 위험도 하락이 발생하였다.