• 지구물리와물리탐사
• /
• 제9권1호
• /
• pp.50-59
• /
• 2006

현재의 응력장내에서 단층 재활성화를 야기하는데 필요한 공극압의 증가를 추정함으로써 재활성화 위험도를 결정하는 FAST(단층 분석 확인 기술)를 이용해 Gippsland Basin의 단층 재환성의 위험도가 계산되었다. Gippsland Basin의 응력 형태는 주향이동단층과 역단층의 경계부근으로서 즉, 최대 수평 압력$({\sim}40.5\;MPa/km)$ > 수직 압력(21 MPa/km) ${\sim}$ 최소 수평 압력(200 MPa/km)이다. 공극압은 Golden Beach Subgroup의 Campanian volcanics 상부에서 정수압이다. 여기에서 결정된 NW-SE 최대 수평 응력 방향$(139^{\circ}N)$은 이전의 측정값들과 대체로 일치하고 Gippsland Basin에서의 NW-SE 최대 수평 응력 방향을 입증한다. Gippsland Basin의 단층 재활성화 위험도는, cohesionless fault$(C=0;\;{\mu}=0.65)$와 healed fault$(C=5.4;\;{\mu}=0.78)$, 두 가지 단층 강도 시나리오를 이용해서 계산되었다. 상대적으로 높고 낮은 재활성화 가능성을 가진 단층들의 방향은 cohesionless fault 와 healed fault 모두에 대해 거의 동일하다. NE-SW 주향방향의 큰 각을 가진 단층들은 현재의 응력상태하에서는 재활성화 가능성이 거의 없다. SSE-NNW 과 ENE-WSW 방향의 큰 각을 가진 단층들이 단층 재활성화 위험도가 가장 높다. 부가적으로 NE-SW 주향 방향의 작은 각을 가진 단층(thrust 단층)은 상대적으로 높은 재활성화 위험도를 가지고 있다. 최적 방향 단층들에 대한 가장 높은 재활성화 위험도는 cohesionless fault에 대해서는 추정 공극압의 3.8MPa$({\sim}548psi)$ 증가(Delta P), healed fault에 대해서는 15.6MPa 증가에 해당된다. 이 논문에서 제시된 단층 재활성화 분석으로부터 얻은 공극압 증가의 절대값은 지구역학적인 모델(원위치 응력과 암석 강도 자료)에서의 불확실성으로 인해 큰 오차를 수반한다. 특히, 최대 수평 응력 강도와 단층 강도 자료는 좁은 범위에 한정되어 있지 않다. 그러므로 단풍 재활성화 분석은 저류층 내에서 최대로 허용할 수 있는 공극압 증가를 직접 측정하는데 사용될 수 없다. 이러한 종류의 단층 재활성화 분석은 단지 단층 재활성화의 상대적인 위험도의 평가에 사용될 수 있을 뿐이고, 재활성화에 앞서 단층이 견딜 수 있는 공극압 증가의 최대 허용치를 결정하는데는 사용할 수 없다고 주장하고자 한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 A
• /
• pp.458-460
• /
• 2000

In this paper, we analyze the inductive coupling between overhead power transmission lines and neighbouring gas pipelines or other conductors, when they parallel to a line section in a phase-to-earth fault is assumed on the transmission line. A numerical procedure employing the finite-element method(FEM) is used in conjunction with Faraday's law, in order to predict the current in a faulted transmission line as well as the induced voltages across points on a pipeline running parallel to the faulted line and remote earth. The results lead to conclusion that may be useful to power system engineers.

• 한국지구과학회지
• /
• 제30권5호
• /
• pp.565-580
• /
• 2009

The Yongdong basin developed during Early Cretaceous in the central part of the Korean Peninsula and bounded on the northwest and southeast by northeast trending mega-scale strike-slip Yongdong Fault. An 8 km thick succession of exclusively terrigeneous sediments can be grouped into two mega-sequences. In concert with the migration of depocenter, the upper sequence overlaps the lower and occupies northern part of the basin during basin evolution. Alluvial and lacustrine environments were predominantly formed from early to late stage of the basin formation. Several lines of evidence support that the basin was formed within intra-arc tectonic environments and destroyed by polyphase tectonic force. Schematic evolutionary diagram of the basin is proposed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.502-505
• /
• 1988

This paper is to demonstrate the effectiveness of one point grounding in support of ESS protection. One point grounding provides for the dispatching of excess energy for protection of switching equipment and personnel from lightning discharge hazards and for a natural sink for noise from atmospheric lightning and power transients. In most ESS installations there are a number of different items that must be maintained at a common ground potential for safety, fault protection or noise reduction. The items typically consist of power systems, heating and ventilating systems, distributing frames, repeating equipmets, switching equipments, etc. Grounding system of an ESS Office is most effective when all the ground points are connected to a single, common earth. The one point grounding prvides a common reference potential, keeping all the items of telecommunications facility free from the earth current and voltage hazards.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 E
• /
• pp.2352-2354
• /
• 1999

The purpose of substation grounding system is to provide reference potential with power system and protect field workers from electrical shock resulted from unsymetrical power system faults. For this purpose, grounding grid should be designed to maintain max, touch voltage under safety criteria in fault conditions. It is difficult, however, to design a safe grounding grid at very resistive or narrow area. This paper describes an example of substation grounding grid design procedures in such areas with very severe design conditions. By using grounding conductors, which is located close to earth surface, earth surface potential could be controlled effectively, so that maximum touch voltages is to be maintained under safety criteria.

• 대한자원환경지질학회:학술대회논문집
• /
• 대한자원환경지질학회 2003년도 춘계 학술발표회 논문집
• /
• pp.178-179
• /
• 2003

Mesothermal, tellurium-bearing gold-silver vein mineralization of the Yuryang mine was formed in mineralogically complex quartz-sulfide veins that filled the fault fractures in Precambrian gneiss within Gyeonggi Massif. Ore grades average 179 g/ton gold with a gold/silver ratio of 1.5 : 1. Ore mineralization was deposited in single stage. Major ore mineralization can be divided into two mineralization phases with increasing paragenetic time: Fe-sulfide and base-metal mineralization phase $\rightarrow$ telluride mineralization phase. (omitted)

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2001년도 학술대회논문집
• /
• pp.173-180
• /
• 2001

Electric power facilities must have effective grounding to provide means to carry electric current into the earth under fault conditions and to prevent damage of equipment, Ignition, and electrocution of presonnel. nuts paper present an algorithm called the Pattern Search method for the optimal parameters selection of the grounding system. Computer simulation results used the CDEGS grounding analysis program verifying the effects of the grounding system design parameters obtained from this method show that the grounding systems are adequately designed.

• 자원환경지질
• /
• 제45권4호
• /
• pp.441-446
• /
• 2012

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전기설비전문위원
• /
• pp.37-39
• /
• 2004

To restrain abnormal voltage and effective operation in protect system, some of customer in Korea earth their own transformer in 154kV power system. The above ground system has some problems if ground fault occurs in other related area such as ground relay errors, under count register in two element register system. There for most huge customers opens the ground neutral and it causes errors in insulate and protection coordination and register system. In this paper presents the solution for above system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.833-836
• /
• 1988

In this paper, we introduced high quality earth leakage breaker(ELB). We improved performances of the ELB by strengthening the environmental stress. We suggested that it have the electromagnetic noise filter, finally high sensitive ZCT for asymmetric fault conditions (including do component).