• 대한원격탐사학회지
• /
• 제37권6_1호
• /
• pp.1767-1772
• /
• 2021

장기간에 걸친 전 지구적인 위성관측 지표면 알베도 자료는 전 지구 기후 및 환경의 변화 감시에 활발히 이용되고 있으며 그 활용도와 중요성이 크다. 우리나라의 경우 정지궤도위성 천리안위성 1호(Communication, Ocean and Meteorological Satellite, COMS) MI(Meteorological Imager) 센서와 천리안위성 2A호(GEO-KOMPSAT-2A, GK-2A) AMI (Advanced Meteorological Imager) 센서의 세대교체를 통해 지속적인 지표면 알베도 산출물의 확보가 가능하다. 그러나 COMS/MI 및 GK-2A/AMI의 지표면 알베도 산출물은 센서 및 알고리즘의 차이로 인해 산출물 간의 차이가 존재한다. 따라서 COMS/MI와 GK-2A/AMI 지표면 알베도 산출 기간을 확장하고 지속적인 기후변화 감시 연계성 확보를 위해 두 위성 산출물 간의 오차 분석이 선행되어야 한다. 본 연구에서는 COMS/MI 및 GK-2A/AMI 지표면 알베도 자료의 중복기간을 대상으로 지상관측자료 AERONET (Aerosol Robotic Network)와 타 위성자료 GLASS (Global Land Surface Satellite)와 함께 비교 분석하였다. 오차 분석 결과 AERONET과의 검증에서 COMS/MI의 평균 제곱근 오차(Root Mean Square Error, RMSE)가 0.043로 GK-2A/AMI의 RMSE인 0.015보다 높게 나타났다. 또한 GLASS와 비교하였을 때 COMS/MI의 RMSE는 0.029로 GK-2A/AMI의 0.038보다 낮게 나타났다. 이러한 오차특성을 이해하고 COMS/MI 및 GK-2A/AMI의 지표면 알베도 자료를 사용할 때 장기간 기후변화 감시에 적극적으로 활용할 수 있을 것이다.

• 한국지구과학회지
• /
• 제42권4호
• /
• pp.425-444
• /
• 2021

Investigating the physical and chemical properties of riverine wetlands is necessary to understand their distribution characteristics and depositional environment. This study investigated the physical (particle size, color, and type) and chemical properties (organic, inorganic, and moisture contents) of sediments in Samrak wetland, located in the Nakdong River estuary area in Busan, South Korea. The particle size analysis indicated that the hydraulic conductivity values for the coarse grain and the mixture of coarse and fine grains ranged from 2.03 to 3.49×10^-1 cm s^-1 and 7.18×10^-3 to 1.24×10^-7 cm s^-1, respectively. In-situ water quality and laboratory-based chemical analyses and radon-222 measurement were performed on groundwater and surface water in the wetland and water from the nearby Nakdong River. The physical and chemical properties of Samrak wetland was characterized by the sediments in the vertical and lateral direction. The concentrations of chemical components in the wetland groundwater were distinctly higher than those in the Nakdong River water though the wetland groundwater and Nakdong River water equally belonged to the Ca-HCO₃ type.

• 한국지구과학회지
• /
• 제28권5호
• /
• pp.545-555
• /
• 2007

Ocean general circulation model developed by GFDL on the basis of MOM4 of FMS are examined and evaluated in order to elucidate the global ocean status. The model employs a tripolar grid system to resolve the Arctic Ocean without polar filtering. The meridional resolution gradually increases from $1/3^{\circ}$ at the equator to $1^{\circ}$ at $30^{\circ}N(S)$. Other horizontal grids have the constant $1^{\circ}$ and vertical grids with 50 levels. The ocean is also coupled to the GFDL sea ice model. It considers tidal effects along with fresh water and chlorophyll concentration. This model is integrated for a 100 year duration with 96 cpu forced by German OMIP and CORE dataset. Levitus, WOA01 climatology, serial CTD observations, WOCE and Argo data are all used for model validation. General features of the world ocean circulation are well simulated except for the western boundary and coastal region where strong advection or fresh water flux are dominant. However, we can find that information concerning chlorophyll and sea ice, newly applied to MOM4 as surface boundary condition, can be used to reduce a model bias near the equatorial and North Pacific ocean.

• 한국대기환경학회지
• /
• 제28권1호
• /
• pp.1-11
• /
• 2012

A case study was conducted for a severe wintertime dust event that occurred on December 29, 2007 in Korea. Three different dust emission schemes, namely, those of Marticorena and Bergametti (1995), Lu and Shao (1999), and Shao (2004) (hereinafter, referred to MB, LS, and S04 schemes, respectively) were implemented in Weather Research Forecast with Chemistry (WRF/Chem) to assess their performance in simulating wintertime Asian dust events. WRF/Chem simulation reproduces dust emission over Mongolia on December 27 and 28, 2007 and the onset timing of the dust event in Korea well. There is, however, a huge difference among the estimated dust emission amounts for the three schemes; the dust concentration derived by MB scheme is 6 times larger than that from LS scheme. The three schemes overestimate dust concentrations when comparing to observed surface-level $PM_{10}$ mass concentrations in Ganghwa, Seoul, and Yeongwol. This discrepancy is thought to be mainly due to the overestimated model winds and the surface condition such as snow cover fraction, which did not adequately represent the real conditions. Considering frozen soil effect on dust emission, the model results are comparable with observation data: it is important to consider frozen soil in simulating wintertime dust events.

• Journal of Mechanical Science and Technology
• /
• 제18권12호
• /
• pp.2182-2189
• /
• 2004

In the recent years, environmentally conscious design and manufacturing technologies have attracted considerable attention. The coolants, lubricants, solvents, metallic chips and discarded tools from manufacturing operations will harm our environment and the earth's ecosystem. In the present work, the Tukey method of multiple comparisons is used to select the minimum level of coolant required in a turning process. The amount of coolant is varied in 270 designed experiments and the parameters cutting temperature, surface roughness, and specific cutting energy are carefully evaluated. The effects of coolant mix ratio as well as the amount of coolant on the turning process are studied in the present work. The cutting temperature and surface roughness for different quantity of coolant are investigated by analysis of variance (ANOVA) - test and a multiple comparison method. ANOVA-test results signify that the average tool temperature and surface roughness depend on the amount of coolant. Based on Tukey's Honestly Significant Difference (HSD) method, one of the multiple comparison methods, the minimum level of coolant is 1.0 L/min with 2% mix ratio in the aspect of controlling tool temperature. F-test concludes that the amount of coolant used does not have any significant effect on specific cutting energy. Finally, Tukey method ascertains that 0.5 L/min with 6% mix ratio is the minimum level of coolant required in turning process without any serious degradation of the surface finish. Considering all aspects of cutting, the minimum coolant required is 1.0 L/min with 6% mix ratio. It is merely half the coolant currently used i.e. 2.0 L/min with 10% mix ratio. Minimal use of coolant not only economically desirable for reducing manufacturing cost but also it imparts fewer hazards to human health. Also, sparing use of coolant will eventually transform the turning process into a more environment-conscious manufacturing process.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제16권2호
• /
• pp.61-76
• /
• 2011

This study was objected to provide suggestions for best management practices to restore the cultural and historical values of the wells in Palaces as well as their water qualities. Water resources in the five Palaces in Seoul Metropolitan, including Gyeongbokgung, Changdeokgung, Changgyeonggung, Jongmyo Shrine, and Deoksugung, were surveyed for their physical flows and chemical compositions from April to July in 2010. Ground waters in most wells were found at depths within 5 m from the ground surface, showing typical water-table aquifer systems. Hydraulic gradients indicate water resources in Gyeongbokgung, Changdeokgung, and Changgyeonggung flowing toward south, and toward east in Deoksugung area. Especially, water-level fluctuation data at S-10 in Deoksugung implied the influence of groundwater discharge facility. In Jongmyo Shrine, water was not detected in wells, indicating the water level was lower than the well depth. Based on the water chemistry and stable isotope analyses, water resources and their qualities appeared to be formed by the water-rock interaction along the groundwater paths. S-10 (Deoksugung) and S-14 (Changgyeonggung) samples were contaminated with nitrate ($NO_3$) in levels of higher than Korean drinking water standard, 10 mg/L as $NO_3$-N, but once in four sampling campaigns. In the situation that water resources in Palaces still maintain natural characteristics, the materials that will be used for the restoration and improvement of the Palace water supplies should be carefully selected not to disturb the natural integrity. In addition, because the wells are located in the center of metropolitan area, a systematic monitoring should be applied to detect and to manage the potential impacts of underground construction and various pollution sources.

• 대한원격탐사학회지
• /
• 제26권6호
• /
• pp.721-730
• /
• 2010

In satellite remote sensing, irregular temporal sampling is a common feature of geophysical and biological process on the earth's surface. Lee (2008) proposed a feed-back system using a harmonic model of single period to adaptively reconstruct observation image series contaminated by noises resulted from mechanical problems or environmental conditions. However, the simple sinusoidal model of single period may not be appropriate for temporal physical processes of land surface. A complex model of multiple periods would be more proper to represent inter-annual and inner-annual variations of surface parameters. This study extended to use a multi-periodic harmonic model, which is expressed as the sum of a series of sine waves, for the adaptive system. For the system assessment, simulation data were generated from a model of negative errors, based on the fact that the observation is mainly suppressed by bad weather. The experimental results of this simulation study show the potentiality of the proposed system for real-time monitoring on the image series observed by imperfect sensing technology from the environment which are frequently influenced by bad weather.

• 한국지구과학회지
• /
• 제40권3호
• /
• pp.212-226
• /
• 2019

극궤도 위성(Aura)에 탑재되어 운용 중인 Ozone Monitoring Instrument (OMI)를 이용하여 동아시아 지역에 대한 등가 람버시안 반사도(Lambertian Equivalent Reflectance; LER)를 유도하였다. 본 연구의 LER 기후값(2004년 10월-2007년 9월)은 기존 OMI 및 MODIS 결과와 다음 대기환경 변수의 관점에서 비교분석되었다. 파장(자외선, 가시광선), 지표 특성(육지, 해양), 그리고 구름 제거. 자외선 및 가시광선 파장역(328-500 nm)에서 산출된 LER은 최소 반사도뿐만 아니라 세 종류 하위 평균(1, 5, 10% 이내)으로 산출되었다. 이들 중에 10% 평균값이 OMI 결과와 가장 잘 일치하였다. 여기서 상관계수는 0.88, 평균 제곱근 오차는 1.0%. 그리고 평균 편차는 -0.3%이었다. 10% 평균값과 기존 OMI LER값은 해양에서 가시광선에 비하여 자외선 영역에서 큰(~2%) 반면에 육지에서는 작게(~1%) 나타났다. 또한 파장 및 지표 특성에 따른 LER 변동폭은 육지 및 가시광선 조건에서, 특히 만년설 및 사막 지역에서 크게 나타났다(~3%). 최소 반사도값은 해양 및 육지의 표본 지역에서 MODIS에 비하여 약 1.4% 과대 산출되었다. 이러한 원인은 고해상도 MODIS 자료에서의 효과적인 구름 제거에 있다고 분석되었다. MODIS에 대한 10% 평균값의 상대 오차는 기존 OMI 산출물에 비하여 해양에서 작았으나(-0.6%) 육지에서는 컸다(1.5%). OMI 산출물 경우에 육지에서의 작은 상대 오차는 Landsat 자료 이용한 효과적인 구름 제거에 있다고 추정되었다. 본 연구는 정지궤도 환경위성(예, GEMS) 관측을 이용한 지면반사도 산출에 기여할 것으로 기대된다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.232-235
• /
• 2006

Using 30 days of hourly visible channel data and DIScrete Ordinate Radiative Transfer (DISORT) model (6S), Aerosol optical depth (AOD) at $0.55{\mu}m$ was retrieved over the East Asia. In contrast with the AOD retrieval using low-earth-orbit satellites such as MODIS (Moderate-Res olution Spectroradiometer) or MISR (Multiangle Imaging SpectroRadiometer), this algorithm with geostationary satellite can improve the monitoring of AOD without the limitation of temporal resolution. Due to the limited number of channels in the conventional meteorological imager onboard the geostationary satellite, an AOD retrieval algorithm utilizing a single visible channel has been introduced. This single channel algorithm has larger retrieval error of AOD than other multiple-channel algorithm due to errors in surface reflectance and atmospheric property. In this study, the effects of manifold atmospheric and surface properties on the retrieval of AOD from the geostationary satellite, are investigated and compared with the AODs from AERONET and MODIS. To improve the accuracy of retrieved AOD, efforts were put together to minimize uncertainties through extensive sensitivity tests. This algorithm can be utilized to retrieve aerosol information from previous geostationary satellite for long-term climate studies.

• Composites Research
• /
• 제31권3호
• /
• pp.83-87
• /
• 2018

An object in the Low Earth Orbit (LEO) is affected by many environmental conditions unlike earth's surface such as, Atomic oxygen (AO), Ultraviolet Radiation (UV), thermal cycling, High Vacuum and Micrometeoroids and Orbital Debris (MMOD) impacts. The effect of all these parameters have to be carefully considered when designing a space structure, as it could be very critical for a space mission. Polybenzimidazole (PBI) is a high performance thermoplastic polymer that could be a suitable material for space missions because of its excellent resistance to these environmental factors. A thin coating of PBI polymer on the carbon epoxy composite laminate (referred as CFRP) was found to improve the energy absorption capability of the laminate in event of a hypervelocity impact. However, the overall efficiency of the shield also depends on other factors like placement and orientation of the laminates, standoff distances and the number of shielding layers. This paper studies the effectiveness of using a PBI coating on the front bumper in a multi-shock shield design for enhanced hypervelocity impact resistance. A thin PBI coating of 43 micron was observed to improve the shielding efficiency of the CFRP laminate by 22.06% when exposed to LEO environment conditions in a simulation chamber. To study the effectiveness of PBI coating in a hypervelocity impact situation, experiments were conducted on the CFRP and the PBI coated CFRP laminates with projectile velocities between 2.2 to 3.2 km/s. It was observed that the mass loss of the CFRP laminates decreased 7% when coated by a thin layer of PBI. However, the study of mass loss and damage area on a witness plate showed CFRP case to have better shielding efficiency than PBI coated CFRP laminate case. Therefore, it is recommended that PBI coating on the front bumper is not so effective in improving the overall hypervelocity impact resistance of the space structure.