• Computers and Concrete
• /
• 제12권1호
• /
• pp.53-64
• /
• 2013

The curing temperature is known to influence the rate of mechanical properties development of early age concrete. In realistic sites the temperature of concrete is not isothermal $20^{\circ}C$, so the paper measured adiabatic temperature increases of four different concretes to understand heat emission during hydration at early age. The temperature-matching curing schedule in accordance with adiabatic temperature increase is adopted to simulate the situation in real massive concrete. The specimens under temperature-matching curing are subjected to realistic temperature for first few days as well as adiabatic condition. The mechanical properties including compressive strength, splitting strength and modulus of elasticity of concretes cured under both temperature-matching curing and isothermal $20^{\circ}C$ curing are investigated. The results denote that comparing temperature-matching curing with isothermal $20^{\circ}C$ curing, the early age concretes mechanical properties are obviously improved, but the later mechanical properties of concretes with pure Portland and containing silica fume are decreased a little and still increased for concretes containing fly ash and slag. On this basement using an equivalent age approach evaluates mechanical properties of early age concrete in real structures, the model parameters are defined by the compressive strength test, and can predict the compressive strength, splitting strength and elasticity modulus through measuring or calculating by finite element method the concreted temperature at early age, and the method is valid, which is applied in a concrete wall for evaluation of crack risking.

• 한국구조물진단유지관리공학회 논문집
• /
• 제14권5호
• /
• pp.63-71
• /
• 2010

본 논문은 프리캐스트 콘크리트 구조물의 조기강도를 촉진시키기 위한 양생공법 중에서 증기양생에 대한 연구내용으로서, 콘크리트 원주형 공시체와 목업체의 실험을 통하여 초기재령에서 요구되는 강도가 발현될 수 있는 증기양생주기와 최고온도를 정량화하여 최적 증기양생온도주기를 고찰하였다. 또한 고온의 증기양생으로 인하여 발생된 콘크리트의 높은 온도와 거푸집 제거시에 발생되는 균열의 발생원인과 대책에 대하여 기술하였으며, 궁극적으로는 PC 부재를 생산하는 과정에서의 조기강도발현과 품질확보를 동시에 만족하면서 경제성 있는 제작방법을 제시하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.599-602
• /
• 2005

In this research, the characteristics of the strength development and chloride attack resistance on the concrete using high early strength cement by steam curing temperature condition were studied. As a result, It is observed that the early strength(16hr) is increasing and the strength of 28 days is decreasing, according as the rising of the steam curing temperature without the kinds of base cement(OPC and high early strength cement). On the other hand, it is observed that the more the contents of the unit binder(base cement + GGBF) is abundant, the more the steam curing temperature can be reduced in case of the high early strength. Also, the chloride attack resistance is improved according as the amount of GGBF is increased with the kinds of base cement(OPC and high early strength cement).

• 콘크리트학회논문집
• /
• 제12권6호
• /
• pp.67-74
• /
• 2000

The usage of nondestructive testing on early-aged concrete leads to enhacned safty and allows effective scheduling of construction, thus making it possible to maximize the time and cost efficiencies. In this study, a reliable nondestructive strength evaluation method for early-aged concrete using the longitudinal wave velocity is proposed. Compression tests were performed to examine factors influencing the velocity-strength relationship of concrete, such as water-cement (w/c) ratio, fine aggregate ratio, curing temperature, and curing condition. The test results show that a change in the w/c ratio and curing temperature has minor effect on the velocity-strength relationship/ However, curing condition significantly influences the velocity-strength relationship of early-aged concrete. Moreover, the longitudinal wave velocity increases with decreasing fine aggregate ratio. It is concluded from this study that the strength evaluation of early-age concrete can be achieved by a nonlinear equation which considers the effects of curing condition and fine aggregate ratio.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1990년도 가을 학술발표회 논문집
• /
• pp.151-156
• /
• 1990

This is an experimental study to investigate chante of early strength of polymer concrete due to curing temperature change. Polymer binders that were used in the experiment include 2 types of epoxy system and 4 types of polyester system which are commercially producer in Korea. The study result showed that there was a difference in early strength by curing temperature. At $35^{\circ}C$ which is a higher than normal curing temperature, higher strengths were developed in polymer concretes prepared with KB-Clear and YD-128 of epoxy system, and G-550 and H-660 of polyester system. However, at the same temperature, reduced strengths were obtained for FH-103 and TR-132 of polyester system. Further study under various curing conditions with humidity and temperature change will warrant more generalized result.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.131-132
• /
• 2021

According to the domestic specification, the curing of the specimen for strength management used to determine the time of the mold deformity of the structure concrete in early spring and early autumn is cured in the field structure condition. However, when the seal curing is performed in the field, the temperature of the specimen is very low compared to the temperature of the actual structure, so the strength of the structure concrete predicted based on the strength of the specimen is much undervalued than the actual one, which causes the mold to be deformed. Therefore, this study analyzed the temperature history and compressive strength characteristics of the specimen for strength management through other sealing curing at 5℃ and concrete of the actual structure, and presented the most suitable curing method.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.397-402
• /
• 2001

Microstructural characteristics such as hydrates and porosity greatly influence the development of concrete strength. In this study, a strength estimation model for early-age concrete considerig, the microstructural characteristics was proposed, which considers the effects of both an increment of degree of hydration and capillary porosity on a strength increment. Hydration modeling and compressive strength test with curing temperature and curing ages were carried out. By comparing test results with estimated strength, it is found that the strength estimation model can estimate compressive strength of early-age concrete with curing ages and curing temperature within a margin of error.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.685-688
• /
• 2006

As the concrete structure being large-sized and/or high-strengthened, the control of the hydration and curing temperature is made much account. This study, analysing the concrete temperature history from cylindric specimen and mock-up structures, investigates the effect of the early age curing condition and the optimum method of curing temperature control on mass concrete.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.641-644
• /
• 2008

콘크리트의 압축강도는 시멘트 수화반응에 의하여 발현되는 것으로, 이러한 수화반응은 온도에 민감한 영향을 받게 된다. 이에 본 연구에서는 온도에 의한 콘크리트의 영향을 확인하고자 콘크리트의 타설 초기온도 변화 및 양생 조건의 변화에 따른 특성을 실험적으로 평가하였다. 콘크리트의 타설 초기온도를 5$^{\circ}C$, 20$^{\circ}C$로 변화시켜 실험한 결과, 표준양생을 실시한 경우 타설 온도가 낮은 배합에서 재령 3일 이전까지 강도가 낮았으나, 재령 7일 이후에서는 강도가 높아지는 현상이 확인 되었다. 그러나 재령 28일에서는 두 배합의 압축강도 차가 미미하여 온도에 따른 영향이 크지 않은 것으로 확인 되었다. 기건양생을 실시한 경우는 모든 시험체에서 타설 초기온도가 높은 배합이 높은 강도를 나타내었다. 이러한 콘크리트의 타설 초기온도에 따른 압축강도 특성은 SEM관찰 결과 미세구조의 수화양상을 통하여 그 특성을 확인할 수 있었다.

• 한국환경과학회지
• /
• 제19권1호
• /
• pp.105-114
• /
• 2010

The objective of the paper is to experimentally investigate the compressive strength of the concrete incorporating fly ash. Ordinary Portland cement(OPC). Water to binder ratio(W/B) ranging from 30% to 60% and curing temperature ranging from $-10^{\circ}{\sim}65^{\circ}C$ were also adopted for experimental parameters. Fly ash was replaced by 30% of cement contents. According to the results, strength development of concrete contained with fly ash is lower than that of plain concrete in low temperature at early age and maturity. In high curing temperature, the concrete with fly ash has higher strength development than that of low temperature regardless of the elapse of age and maturity. Fly ash can have much effect on the strength development of concrete at the condition of mass concrete, hot weather concreting and the concrete products for the steam curing.