• Journal of Radiation Industry
• /
• v.4 no.1
• /
• pp.25-31
• /
• 2010

Cooking drips which were obtained as by-product after seafood processing in the food industries, still contain lots of proteins, carbohydrates, and other functional materials. This study was conducted to investigate the effect of gamma irradiation on the biological activities of seafood cooking drips. When the cooking drips of Hizikia fusiformis, Enteroctopus dofleini and Thunnus thynnus were irradiated, the antioxidant activities, whitening effect, and angiotensin I converting enzyme inhibition activity of the ethanol extract from seafood cooking drips were all increased by gamma irradiation. This was because of the increased extraction efficiency of available compounds by irradiation. These results suggested that the seafood cooking drips, wasted as by-products, can be used as functional compounds with gamma irradiation treatment.

• Journal of Radiation Industry
• /
• v.5 no.2
• /
• pp.175-178
• /
• 2011

This study was conducted with effect of lactic acid bacteria by gamma irradiation. Lactic acid bacteria were exposed to irradiation with a single absorbed dose of 1, 2, 3, 4, 5, 6, 8, and 10 kGy. Possible lactic acid bacteria, including Lactobacillus paracasei KCTC 13169, Lactobacillus casei KCTC 3109, Lactobacillus acidophilus KCTC 3140, Lactobacillus plantarum subsp plantarum KCTC 3103, Lactobacillus debruekii subsp bulgaricus KCTC 3635, Streptococcus thermophilus KCTC 3658 were selected. The radiation sesitivities of lactic acid bacteria were expressed as $D_{10}$ values. The $D_{10}$ values of Lactobacillus paracasei, Lactobacillus casei, Streptococcus thermophilus, Lactobacillus acidophilus, Lactobacillus plantarum, and Lactobacillus debruekii were calculated as 0.42, 0.51, 0.47, 0.90, 0.44, and 0.61 kGy, respectively. Results suggest that L. acidiphilus has the highly resistant to gamma irradiation.

• STI Policy Review
• /
• v.5 no.2
• /
• pp.1-19
• /
• 2014

The concept of a holistic innovation policy is defined in this article, with discussions of what it is, why it is relevant, and how it can be implemented to enhance product innovation. It is shown that the innovation systems approach has diffused rapidly during the latest decades and has completely replaced the linear view in the field of innovation research. The majority of European countries are striving in the direction of developing a more holistic innovation policy. However, it is concluded that the innovation policies in European countries are still dominantly linear despite the fact that holistic policy seems to be the driving vision. Innovation policy is behindhand. Why innovation policy is still linear is also preliminarily discussed. Policymakers attending conferences on innovation are practically always in favor of holistic (systemic, broad-based, comprehensive, etc) innovation policies, have abandoned the linear view by learning from innovation research. The division between "linear" and "holistic" seems to be located within the community where innovation policies are designed and implemented, a community composed of policymakers (administrators/bureaucrats) and elected politicians. Perhaps the dividing line is between these two groups in that politicians, who actually make the decisions, may still reflexively believe in the linear view. Nevertheless, there seems to be a failure in communication between researchers and politicians in the field of innovation and there is therefore a strong need to involve innovation researchers in policy design and implementation to a much higher degree. Another way to increase the degree of holism could be to separate innovation policy from research policy, since their integration tends to cement the linear character of innovation policy. The empirical results are based on a questionnaire sent to twenty-three EU Member States, out of which nineteen (83%) responded. Part of the work for this article was carried out for the European Research and Innovation Area Committee (ERAC) of the European Commission (DG RTD).

• Advances in environmental research
• /
• v.10 no.1
• /
• pp.17-41
• /
• 2021

Kazakhstan's cities experience high concentrations levels of atmospheric particulate matter (PM), which is well-known for its highly detrimental effect on the human health. A further increase in PM concentrations in the future could lead to a higher air pollution-caused morbidity and mortality, causing an increase in healthcare expenditures by the government. However, to prevent elevated PM concentrations in the future, more stringent standards could be implemented by lowering current maximum allowable PM concentration limit to Organization for Economic Co-operation and Development (OECD)'s limits. Therefore, this study aims to find out what impact this change in environmental policy towards PM has on state economy in the long run. Future PM10 and PM2.5 concentrations were estimated using multiple linear regression based on gross regional product (GRP) and population growth parameters. Dose-response model was based on World Health Organization's approach for the identification of mortality, morbidity and healthcare costs due to air pollution. Analysis of concentrations revealed that only 6 out of 21 cities of Kazakhstan did not exceed the EU limit on PM10 concentration. Changing environmental standards resulted in the 71.7% decrease in mortality and 77% decrease in morbidity cases in all cities compared to the case without changes in environmental policy. Moreover, the cost of morbidity and mortality associated with air pollution decreased by $669 million in 2030 and $2183 million in 2050 in case of implementation of OECD standards. Thus, changing environmental regulations will be beneficial in terms of both of mortality reduction and state budget saving.

• Clean Technology
• /
• v.15 no.1
• /
• pp.23-30
• /
• 2009

European directive DIRECTIVE 2002/96/EC requires the minimum recycling & recovery rate on the waste electrical and electronic equipments (WEEE). But, they do not have guidelines on the calculation methods for recycling and recovery rate. A standard method to calculate recyclability and recoverability rate of products in the designing stage is necessary for the manufacturers so that they can reflect the calculated result to the improvement of product design. In this work, we investigated the existing calculation methods for the recycling and recovery rates of WEEE and the recyclability and recoverability rates of electrical and electronic equipments (EEE). A method for the calculation of recyclability and recoverability rates for the EEE products in the development stage was developed. The newly-developed calculation method was applied to some EEE products and the calculated results were evaluated.

• Nuclear Engineering and Technology
• /
• v.55 no.4
• /
• pp.1300-1309
• /
• 2023

Simulated debris was synthesized using UO₂, Zr, and stainless steel and a heat treatment method under inert or oxidizing conditions. The primary U solid phase of the debris synthesized at 1473 K under inert conditions was UO₂, whereas a (U, Zr)O₂ solid solution formed at 1873 K. Under oxidizing conditions, a mixture of U₃O₈ and (Fe, Cr)UO₄ phases formed at 1473 K, whereas a (U, Zr)O_2+x solid solution formed at 1873 K. The leaching behavior of the fission products from the simulated debris was evaluated using two methods: the irradiation method, for which fission products were produced via neutron irradiation, and the doping method, for which trace amounts of non-radioactive elements were doped into the debris. The dissolution behavior of U depended on the properties of the debris and aqueous solution for immersion. Cs, Sr, and Ba leached out regardless of the primary solid phases. The leaching of high-valence Eu and Ru ions was suppressed, possibly owing to their solid-solution reaction with or incorporation into the uranium compounds of the simulated debris.

• Journal of Environmental Health Sciences
• /
• v.48 no.1
• /
• pp.36-43
• /
• 2022

Background: Preservatives are used to prevent product deterioration in modeling clay. Parabens, a representative preservative, have been found to be endocrine disruptors and cause skin irritation and allergic reactions. Isothiazolinone preservatives can be irritating to the skin, respiratory tract, and eyes. Thorough investigation and regulation of clay are necessary because clay is marketed to children, who are more sensitive to the toxic effect of chemicals. Objectives: In this study, the presence of 16 preservatives was analyzed in modeling clay and the results were compared with current standards. Methods: A total of 200 samples were collected from 28 children's clay products sold in South Korea (13 from Korea and 15 imported from overseas). Twelve preservatives, such as parabens, were analyzed using high-performance liquid chromatography (HPLC). Isothiazolinone preservatives (chloromethylisothiazolinone; CMIT, methylisothiazolinone; MIT, octylisothiazolinone; OIT, and benzisothiazolinone; BIT) were analyzed using ultra performance liquid chromatography-tandem mass spectrometery (UPLC-MS/MS). Results: Dehydroacetic acid (DHA) was detected the most in the clays at 51.50% (103 cases) detection; 38 cases (median 190.42 ㎍/g) in Korean products and 65 cases (median 169.62 ㎍/g) in Chinese products. CMIT, which is prohibited in Korea, was detected in 14 (median 16.28 ㎍/g) Chinese products. OIT, which has a chemical structure similar to CMIT was found in 28 (median 68.38 ㎍/g) samples in Korean products. Conclusions: The use of CMIT and MIT in children's products is prohibited in Korea and the European Union (EU). The detection of CMIT in Chinese clay products suggests that management is necessary for imported products. It is necessary to review the safety and regulatory status for OIT because OIT was used as a substitute for CMIT and MIT in Korean products.

• Journal of Animal Science and Technology
• /
• v.51 no.3
• /
• pp.201-206
• /
• 2009

Seventeen porcine microsatellite (MS) markers recommended by the EID+DNA Tracing EU project, ISAG and Roslin institute were selected for the use in porcine individual and brand identification. The MSA, CERVUS, FSTAT, GENEPOP and API-CALC programs were applied for calculating heterozygosity indices. By considering the hetreozygosity value and PCR product size of each marker, we established a MS marker set composed of 13 MS markers (SW936, SW951, SW787, S00090, S0026, SW122, SW857, S0005, SW72, S0155, S0225, SW24 and SW632) and two sexing markers. The expected probability of identity among genotypes of random individuals (PI), probability of identity among genotypes from random half sibs ($PI_{half-sibs}$) and among genotypes of random individuals, probability of identity among genotypes from random sibs($PI_{sibs}$) were estimated as $2.47\times10^{-18}$, $6.39\times10^{-13}$ and $1.08\times10^{-8}$, respectively. The results indicate that the established marker set can provide a sufficient discriminating power in both individual and parentage identification for the commercial pigs produced in Korea.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.8
• /
• pp.200-207
• /
• 2016

The automotive seat is an important component that moves in sync with the driver and is actively being developed with various new functions. The aim of this work is to develop a lightweight seat cushion extension module using a lightweight material. To this end, a structural strength analysis, vertical strength test, and durability test were conducted. In the structural analysis, the maximum value of deformation under vertical load was 4.98 mm at the front of the upper panel. The maximum stress was approximately 105 MPa, which occurred at the point of contact between the upper and lower panels of the module. The vertical strength test showed a maximum vertical deformation of 5.31 mm under a vertical load, which differed from the analysis results by approximately 6.45%. The structural safety of the product was verified by the fact that it showed no harmful deformation or damage during operation after the vertical strength test and a durability test for 20,000 cycles. Furthermore, the use of engineering plastics made it possible to reduce the weight by approximately 30% compared to existing products. The lack of damage after tests verified the passenger safety, strength, and rigidity of the product. The results are expected to be applied for improving environmental and fuel efficiency regulations and preventing accidents due to driver fatigue. The applications of this module could be expanded various types of vehicles, as well as other industries in which eco-friendly and lightweight materials are used.

• Journal of Food Hygiene and Safety
• /
• v.38 no.6
• /
• pp.476-482
• /
• 2023

This study aimed to investigate the acrylamide content in frozen food products after cooking. Twenty samples of bread (Group 1) and 30 samples of processed tuberous and corn vegetable products (Group 2) were selected. Acrylamide levels were quantified using liquid chromatography tandem-mass spectrometry (LC-MS/MS). The frozen food samples were heated using the air fryer cooking method according to the product packaging and were compared to ready-to-eat French fries (Group 3). The results showed that the acrylamide content was the highest in group 3, followed by that in group 2 and group 1. The acrylamide content of all the samples was found to be within the domestic recommended standard of 1 mg/kg. However, when the samples that exceeded EU benchmark level (0.5 mg/kg) were selected and cooked using the deep-fat frying method according to the product packaging, one of them showed the acrylamide content of 1.83 mg/kg, which exceeded the domestic recommended standard. The present study highlights the need for continued evaluation and management to reduce acrylamide contents in frozen foods, as increasing domestic exposure to acrylamide is concerning.