• ETRI Journal
• /
• 제30권2호
• /
• pp.308-314
• /
• 2008

In this paper, we describe the fabrication of 3.5-inch QCIF active matrix organic light emitting display (AMOLED) panels driven by thin film transistors, which are produced by an ultra-low-temperature polycrystalline silicon process on plastic substrates. The over all processing scheme and technical details are discussed from the viewpoint of mechanical stability and display performance. New ideas, such as a new triple-layered metal gate structure to lower leakage current and organic layers for electrical passivation and stress reduction are highlighted. The operation of a 3.5-inch QCIF AMOLED is also demonstrated.

• ETRI Journal
• /
• 제32권5호
• /
• pp.646-656
• /
• 2010

A component is a reusable and replaceable software module accessed through its interface. Component-based development is expected to shorten the development period, reduce maintenance costs, and improve program reusability and the interoperability of components. This paper proposes a new robot software component platform in order to support the entire process of robot software development. It consists of specifications of a component model, component authoring tool, component composer, and component execution engine. To show its feasibility, this paper presents the analysis results of the component's communication overhead, a comparison with other robotic software platforms, and applications in commercial robots.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1249-1252
• /
• 2007

We have fabricated 3.5” transparent AM-OLED panel driven by PEALD grown ZnO TFT. The performance of ZnO thin film transistor was improved by adapting top gate structure, protection layer for ZnO from photolithography process, optimizing temperature and plasma power of ZnO growth process. The ZnO-TFT has a mobility of $8.9cm^2/V.s$, a subthreshold swing of 0.95V, and an on/off ratio of $10^7$.

• 한국정보과학회 언어공학연구회:학술대회논문집(한글 및 한국어 정보처리)
• /
• 한국정보과학회언어공학연구회 1999년도 제11회 한글 및 한국어 정보처리 학술대회 및 제1회 형태소 분석기 및 품사태거 평가 워크숍
• /
• pp.40-43
• /
• 1999

본 논문에서는 한국전자통신 연구원 지식정보 연구부에서 제안하는 자연어 정보처리 기술 표준안을 적용하여 품사 부착 말뭉치를 구축하는 과정에서 논란의 여지가 있었던 대표적인 사항들에 대해 기술한다. 아울러 ETRI 표준안이 도출된 원칙과 취지 등을 품사 부착 말뭉치 구축과 관련하여 설명하고, 현재의 ETRI 표준안이 앞으로 어떤 식으로 개선되어야 할 지에 대해 제안한다.

• ETRI Journal
• /
• 제26권4호
• /
• pp.344-350
• /
• 2004

We propose a filter-free wavelength conversion using a Mach-Zehnder interferometer with monolithically integrated $2{\times}2$ multimode interference semiconductor optical amplifiers (MMI-SOAs). The device has been optimized by considering a non-homogeneous carrier distribution due to the self-imaging properties of the MMI-SOA. Static measurements show an extinction ratio of up to 18 dB and an input signal rejection ratio of up to 20 dB.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1587-1590
• /
• 2006

Through the engineering of recombination region and energy transfer in organic light emitting device, blue and red light emitting device with good color stability has been successfully obtained. A Color control layer (CCL), which emits green light through the energy transfer from the emission layers, has been introduced into the blue and red light emitting device for RGB white OLED. The RGB white OLED showed the current efficiency of 13 cd/A and the CIE coordinates of (0.33, 0.38) at $1000\;cd/m^2$. The device exhibited very stable spectrum with respect to operating current density and the CIE coordinates varied from (0.34, 0.38) to (0.31, 0.37) for $100-22000\;cd/m^2$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1374-1377
• /
• 2005

Top-emitting organic light-emitting diode (TEOLED) was fabricated on flexible substrate of PES film. Aluminum and Chromium multilayer was used as an anode of TEOLED and the TEOLEDs of Cr(20nm)/Al(100nm)/Cr(20nm)/NPB(60nm)/Alq(60nm)/LiF(1nm)/Al(2nm)/Ag(20nm)/NPB(200nm) has been fabricated on PES film and Si wafer for control device. The TEOLED on PES film which had good anode surface morphology, showed very similar device characteristics to that on Si wafer.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.528-530
• /
• 2003

We present a novel photo-addressable electronic paper using an electrophoretic device, which can show and sustain the 2D images transferred by the UV illumination. The device consists of the organic photoconducting layer reacting with the UV illumination and the electronic ink (white particles and blue dye) dispersing in a suspending medium. The voltage impression under illuminating of UV make an image be transferred to the electrophoretic cell. The transferred image can be maintained by the bistability of the electrophoretic device.

• ETRI Journal
• /
• 제24권5호
• /
• pp.398-400
• /
• 2002

Using $Cr_2O_3$ thin film, we developed a novel etch-stop technique for the protection of silicon surface morphology during deep ion coupled plasma etching of silica layers. With this technique we were able to etch a silica trench with a depth of over 20 ${\mu}m$ without any damage to the exposed silicon terrace surface. This technique should be well applicable to fabricating silica planar lightwave circuit platforms for opto-electronic hybrid integration.

• ETRI Journal
• /
• 제31권4호
• /
• pp.357-364
• /
• 2009

In this paper, we propose a novel equalization on-channel repeater (OCR) with a feedback interference canceller (FIC) to relay terrestrial digital multimedia broadcasting signals in single frequency networks. The proposed OCR not only has high output power by cancelling the feedback signals caused by insufficient antenna isolation through the FIC, but also shows better output signal quality than the conventional OCR by removing multipath signals existing between the main transmitter and the OCR through an equalizer. In addition, computer simulations and laboratory test results demonstrate that the proposed OCR successfully cancels feedback signals and compensates channel distortions and provides a higher quality transmitting signal with higher output power than conventional OCRs.