• Proceedings of the KIPE Conference
• /
• 2015.11a
• /
• pp.97-98
• /
• 2015

에너지 저장 시스템(ESS, Energy Storage System)은 태양광(PV)발전, 풍력(WT)발전시스템 등과 같은 신재생 에너지 출력안정화, 계통 전력품질 개선, 수용가 에너지효율화 등의 분야에 이용되고 있다. 에너지 저장 시스템은 전력변환장치와 에너지 저장 장치로 구성되며, 에너지 저장 장치로 배터리를 많이 사용하고 있다. 전력변환장치 및 제어기의 설계 및 검증을 위해서는 배터리를 전력변환장치에 연계하여야 하지만 배터리의 경우 고가에 관리가 어려운 문제로 인해 일반적으로 배터리 모의 장치를 이용한다. 본 논문에서는 대용량 에너지 저장 시스템용 전력변환장치 및 제어기의 설계와 현실적인 검증이 가능한 MW급 PCS 성능검증용 배터리 모의장치를 개발하였다.

• Proceedings of the KIPE Conference
• /
• 2015.11a
• /
• pp.125-126
• /
• 2015

본 논문에서는 ESS (Energy Storage System)용 양방향 벅-부스트 컨버터가 부하 변화에 상관없이 안정적인 전압제어를 하기 위한 아날로그 제어기를 설계한다. 양방향 벅-부스트 컨버터의 소신호 모델을 이용하여 일반화된 전달 함수를 구하고 이를 기반으로 입 출력 부하 변화와 충 방전 모드 변화에 상관없이 안정적인 전압제어를 위한 제어기를 설계한다. 그리고 시뮬레이션을 이용하여 제어기 설계 과정의 타당성을 밝히고 설계한 제어기의 성능을 분석한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2015.10a
• /
• pp.277-278
• /
• 2015

해당 연구 시스템은 신재생에너지, 에너지저장장치를 연계하여 수용가의 전력소모기기를 효율적으로 제어할 수 있는 에너지 네트워크 고효율 시스템 기술로 수요반응 또는 사용자 설정에 따른 제어신호 생성 및 전달, 전력소모기기 사용량 분석을 통한 에너지 사용분석, ESS와 신재생에너지 투입에 대한 제어 및 분석, ESS, 신재생에너지, 에너지게이트웨이, 전력소모기기 간 분석을 통한 Load Balancing 기능을 제공하고자 한다. 현재는 연구단계로 설계 및 연계 통신은 완료상태이며, 주요 알고리즘 적용을 진행 중에 있다.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.475-476
• /
• 2019

본 논문에서는 다기능 ESS의 제어알고리즘 및 운영 전략에 따른 모드 천이 안정성 및 경제성 등 장시간 시뮬레이션을 수행할 수 있는 소프트웨어 테스트베드 모델설계 결과를 제시한다. 전력변환장치의 순시 응답 특성을 확인하기 위해서 인버터 전력반도체 스위치, 인덕터 및 커패시터 등의 부품에 대한 모델링이 필요하고, 이는 전력계통에서 활용되고 있는 상용 소프트웨어인 Matlab/Simulink/SimPowerSystems의 라이 브러리를 활용하여 구현할 수 있다. 하지만 평균모델을 사용하는 경우에도 각 요소 회로의 시정수로 인해 시뮬레이션의 샘플링 시간을 줄이는 데는 한계가 있다. 따라서 본 논문에서는 신재생 에너지의 하루 발전 특성에 대한 제어로직에 따른 결과 및 경제성 분석등에 활용할 수 있는 기능모델(functional model)의 설계 방법을 제시하고, 개발된 모델을 상용소프트웨어의 결과와 비교함으로써 본 연구결과의 타당성을 보인다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.26 no.6
• /
• pp.411-420
• /
• 2021

In this paper, bidirectional LLC-LC resonant DC-DC converter with notch filters in the primary side of resonant circuits is proposed. Even if resonant capacitors are used on the primary and secondary sides, the proposed converter can operate with the high gain characteristics of the LLC resonant converter without mutual coupling of resonant capacitors, regardless of the direction of power flow. In addition, by applying notch filters, the proposed converter can operate with a wider gain control range and can cope with overload and short circuit. The analysis and operating characteristics of the proposed bidirectional LLC-LC resonant converter are investigated. A 3.3 kW prototyped bidirectional LLC-LC resonant converter connected to 750 V_DC buses is designed and tested to verify the validity and applicability of this proposed converter.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.6
• /
• pp.592-597
• /
• 2019

A conventional method to improve transient stability in power system is the use of reactive power compensation devices such as STATCOM and SVC. However, this traditional method cannot prevent a rapid voltage collapse brought on by motors stalling due to system fault. On the other hand, ESS(Energy Storage System) provides fast-acting, flexible reactive and active power control. The fast active power compensation with energy storage system plays a significant role in transient stability enhancement after a major fault of power system. In this paper, transient stability enhancement method by using energy storage system is proposed for the power system including a dynamic load such as large motor. The effectiveness of energy storage system compared to conventional devices in enhancing transient stability of power system is presented. The results of simulations show that the simultaneous injection of active and reactive power can enhance more effectively transient stability.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.26-31
• /
• 2017

The conventional method of improving the transient stability in a power system is the use of reactive power compensation devices, such as the STATCOM and SVC. However, this traditional method cannot prevent the rapid voltage collapse brought about by the stalling of the motor due to a system fault. On the other hand, the ESS (Energy Storage System) provides fast-acting, flexible reactive and active power control. The fast-acting power compensation provided by an energy storage system plays a significant role in enhancing the transient stability after a major fault in the power system. In this paper, a method of enhancing the transient stability using an energy storage system is proposed for power systems including a dynamic load, such as a large motor. The effectiveness of the energy storage system compared to conventional devices in enhancing the transient stability of the power system is presented. The results of the simulations show that the simultaneous injection of active and reactive power can enhance the transient stability more effectively.

• Transactions of the Korean hydrogen and new energy society
• /
• v.28 no.4
• /
• pp.407-418
• /
• 2017

Battery heat management is essential for high power and high energy battery system because it affects its performance, longevity, and safety. In this paper, we investigated the temperature of the 18650 Lithium Ion Battery Module used in a Energy Storage System (ESS) and the cooling method to minimize cell-to-cell temperature variation of battery module. For uniform temperature distribution within a battery module, the flow direction of the coolant in a battery module has been changed according to the time interval, and studied the effect of the cooling method on the temperature uniformity in a battery module which includes a number of battery cells. The experimental results show that bi-directional battery cooling method can effectively reduce the cell-to-cell temperature variation compared with the one-directional battery cooling. Furthermore, it is also found that bi-directional battery cooling can reduce the maximum temperature in a battery module.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.3
• /
• pp.371-381
• /
• 2016

This paper presents a study on reliability assessment and new contribution function development of power system including Wind Turbine Generator(WTG) combined with Battery Energy Storage System(BESS). This paper develops and proposes new reliability contribution function of BESS installed at wind farms. The methodology of reliability assessment, using Monte Carlo Simulation(MCS) method to simulate sample state duration, is proposed in detail. Forced Outage Rate(FOR) considered probabilistic approach for conventional generators is modelled in this paper. The penetration of large wind power can make risk to power system adequacy, quality and stability. Although the fluctuation of wind power, BESS installed at wind farms may smooth the wind power fluctuation. Using small size system as similar as Jeju island power system, a case study of reliability evaluation and new proposed contribution function of power system containing WTG combined with BESS is demonstrated in this paper, which would contributes to BESS reliability contribution and assessment tools of actual power system in future.

• Journal of Broadcast Engineering
• /
• v.15 no.2
• /
• pp.205-216
• /
• 2010

In this paper, a method of MPEG-2 Transport Stream (TS) multiplexing for Ultra HDTV (UHDTV) and its design and implementation as a SW tool is described. In practice, UHD video may be divided into several HD videos and each video is encoded in parallel. Therefore, it is necessary to synchronize and multiplex multiple bitstreams encoding each HD video for transmitting and storing UHD video. In this paper, it is assumed that 4 HD videos partitioning a UHD spatially are encoded as H.264/AVC and two 5.0 channel audios are encoded by AC-3. Therefore, 4 H.264/AVC elementary streams (ESs) and 2 AC-3 ESs is mainly considered in the TS multiplexing of UHD. For the carriage of H.264/AVC and AC-3 over MPEG-2 TS, PES packetization and TS multiplexing are designed and implemented based on the extended specification of the MPEG-2 Systems and ATSC (Digital audio compressed standard), respectively. The implemented UHD TS multiplexing tool emulates real time HW operation in the time unit corresponding to the duration of one TS packet transmission in a given TS rate. In particular, in order to satisfy the timing model, the buffers defined in the TS System Target Decoder (T-STD) are monitored and their statuses are considered in the scheduling of TS multiplexing. For UHD multiplexing, two kinds of multiplexing structures, which are UHD re-multiplexing and UHD program multiplexing, are implemented and their strength and weakness are investigated. The developed UHD TS multiplexing tool is tested and verified in terms of the syntax and semantics conformance and functionalities by using a commercial analyzer and real-time presentation tools.