• Journal of Electrical Engineering and Technology
• /
• v.13 no.6
• /
• pp.2236-2244
• /
• 2018

We make optimal consecutive offer curves for an energy storage system (ESS) integrated wind power producer (WPP) in the co-optimized day-ahead energy and regulation markets. We build the offer curves by solving multi-stage stochastic optimization (MSSO) problems based on the scenarios of pairs consisting of real-time price and wind power forecasts through the progressive hedging method (PHM). We also use the rolling horizon method (RHM) to build the consecutive offer curves for several hours in chronological order. We test the profitability of the offer curves by using the data sampled from the Iberian Peninsula. We show that the offer curves obtained by solving MSSO problems with the PHM and RHM have a higher profitability than offer curves obtained by solving deterministic problems.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.458-461
• /
• 2008

This paper deals with a single-phase impedance-source dynamic voltage restorer (Impedance-DVR) to mitigate voltage sag/swell for the critical loads. The proposed system is composed of passive filter and impedance-source topology inverter. As an ESS(Energy Storage System) of the proposed system is employed the Proton Exchange Membrane Fuel Cells (PEMFC). To calculate and control the compensation voltage, single-phase $^id-^iq$ theory in dq rotating reference frame and PI controller are used. Simulation results under voltage sag and swell are presented to show the performance.

• International Journal of Internet, Broadcasting and Communication
• /
• v.7 no.2
• /
• pp.36-40
• /
• 2015

In Korea, new total energy-saving solution has planned to build test-bed in underground subway station. Breaking energy is one of the most energy saving method in railway, but it has not be fully used up for economical purpose. This paper demonstrates on energy saving technology application including breaking energy and heating energy to underground subway station. It also offer solution of optimization of power energy flow. Moreover, economic feasibility analysis performed for undergound test bed constuction.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.171-173
• /
• 2018

섬이나 고립된 지역들은 디젤 발전기를 이용하여 전력 공급을 해왔다. 발전소와 송배전설비 증설에 대한 경제적 문제와 사회적 갈등이 심하기 때문이다. 최근 이러한 비용, 사회 그리고 환경 문제로 인해 에너지 자립섬에 대한 관심이 증가하고 있다. 에너지 자립섬이란, 태양광, 풍력 등 신재생에너지와 배터리를 이용해 필요한 에너지를 스스로 생산하고 사용하는 섬을 말한다. 따라서 디젤 발전기 화석연료 사용량과 유지보수 비용을 줄일 수 있다. 본 논문에서는 상위제어기에 해당하는 EMS(Energy Management System)를 이용해 디젤 발전기, 태양광 PCS(Power Conversion System)와 에너지저장장치(Energy Storage System: ESS)의 유기적인 운영으로 높은 에너지 자립률을 달성한 사례를 소개하고자 한다.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.34-35
• /
• 2013

최근 신재생 에너지원의 증가와 더불어 전력 산업 전반의 요구에 대해 에너지 저장시스템(ESS, Energy Storage System)에 대한 필요성이 높아지고 있다. 전력 수요의 급격한 증가는 전력계통의 교란이 증가하게 되어 전력품질의 문제를 야기 시키고, 이에 따라 송배전 설비의 증설에 교구 커지고 있는 상황이다. 이에 대한 적절한 대안으로 배터리를 이용한 에너지 저장 시스템(BESS, Battery Energy Storage System)이 대두되고 있는 상황이며, 특히 계통연계형 PCS에 BESS를 적용시킬시에 능동적인 부하 평준화 기능을 통해 송배전 설비투자 지연의 목적을 달성할 수 있는 장점을 가진다. 따라서 본 논문에서는 BESS기능을 겸비한 PCS 시스템 구성을 제안하고, 이에 대하여 기술한다.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.467-468
• /
• 2013

In this paper, a switching control strategy of bidirectional converter for energy storage system in photovoltaic hybrid modules is proposed. The bidirectional converter for energy storage system (ESS) with battery is connected with DC link in parallel which is located between current source flyback converters(CSFC) and unfolding bridge. Because CSFC generates rectified sinusoidal current, the bidirectional converter requires suitable control strategy. Therefore, a theoretical analysis of the proposed switching control strategy is presented. And, validity is confirmed through simulation results.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.27 no.3
• /
• pp.265-274
• /
• 2022

This paper proposes a machine learning-based screening algorithm to build the retired battery pack of the energy storage system. The proposed algorithm creates the dataset of various performance parameters of the retired battery, and this dataset is preprocessed through a principal component analysis to reduce the overfitting problem. The retried batteries with a large deviation are excluded in the dataset through a density-based spatial clustering of applications with noise, and the K-means clustering method is formulated to select the group of the retired batteries to satisfy the deviation requirement conditions. The performance of the proposed algorithm is verified based on NASA and Oxford datasets.

• Transactions of the Korean hydrogen and new energy society
• /
• v.32 no.4
• /
• pp.263-270
• /
• 2021

In this study, we proposed the necessity of reusing the battery industry after domestic use, preparing legal arrangements by step for recycling, clarifying responsible materials by processing stage, and establishing infrastructure and screening diagnostic rating system. The purpose of this study is to establish a life cycle integrated management system for electric vehicle batteries and to find suitable ways for improving the lifespan of electric vehicle batteries, reuse, and recycling in stages to avoid other environmental pollution problems due to batteries after using electric vehicles used to reduce environmental pollution due to climate change.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.6
• /
• pp.631-638
• /
• 2022

Microgrid, which enables the production and consumption of electricity to be done independently on a small scale, has been studied on one of the solutions of reinforcement for flexibility of electronic system. This study examined the application effect of new microgrid by applying hybrid battery in electric power storage device. We designed the system to highlight the advantage of each battery and complement the disadvantage by using hybrid system with Lithium-ion battery and interval Redox flow battery. It runs with lithium-ion battery during the initial startup while the Redox flow battery operates for a long time at the end of excessive period, and it enables a discharge of Lithium-ion and Redox flow battery at the same time when the load has a large output. We chose Maldives as a subject of this study for organizing and optimizing independent microgrid. Maldives is the country to accomplish 100% domestic electricity in South Asia, but the whole electric power is supplied through diesel generation imported fossil fuel. We organized and optimized microgrid for energy independence on Malahini island to solve Maldives energy cost problem and global energy environment matters. We analyzed the daily power supply and accumulated the power supply from September 18, 2018~February 11, 2019. The accumulated power supply was about 120.4 MWh and the daily power supply was about 800~1000 kWh. Based on the collected information, we divided the cases into three models which are only diesel generator, solar generator as well as diesel generator, and solar+ESS+diesel generator. We analyzed the amount of oil consumption compared to the cost of construction and power output. The result showed that solar+ESS+diesel generator was most economically feasible. As well, we obtained that our considering hybrid battery system reduced the fuel consumption for diesel power generation about 10~15%.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.17 no.2
• /
• pp.174-181
• /
• 2012

Energy storage system connected to the grid has two functions such as the surplus power of a grid is stored in batteries or the energy stored in batteries will supply to the grid when the grid needs. The battery energy storage system consist of power condition system (PCS) for power supply and battery conditioning system (BCS). Lithium-ion batteries are mainly used. In this paper, the battery energy storage system connected to the grid described. The configuration of the 2MVA class power control system using water cooling and battery system are presented. And control method for the system and the output filter design method are proposed. Experimental verification of the proposed system is provided with 2MVA PCS and 500kWh BCS.