• 제목/요약/키워드: EPA-SWMM

검색결과 68건 처리시간 0.027초

공업지역에서의 SS관리를 위한 생태저류지 설계방안 (Design Practice of Bio-Retention for SS management at Industrial Area)

  • 최보경;김상단
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2015년도 학술발표회
    • /
    • pp.446-446
    • /
    • 2015
  • 본 연구에서는 공업지역의 비점오염저감시설을 설계하는 방안이 제안된다. 처리대상구역의 SS 배출부하량은 최근 국립환경과학원에서 제안하고 있는 원단위를 기반으로 산출된다. SWMM을 이용하여 처리대상구역의 SS 배출부하량을 모의한 뒤, 비점저감시설로서 생태저류지를 설치하여 설계용량에 따른 비점저감효과가 정량화된다. 다양한 모의결과를 바탕으로 생태저류지 설계용량에 따른 SS의 삭감대상부하비가 유도되며, EPA 기준에 따른 생태저류지의 SS 저감효율이 산정된다.

  • PDF

수리·수문해석 모델을 활용한 농업용수 회귀수량 추정 (Estimating the Return Flow of Irrigation Water for Paddies Using Hydrology-Hydraulic Modeling)

  • 신지현;남원호;윤동현;양미혜;정인균;이광야
    • 한국농공학회논문집
    • /
    • 제65권6호
    • /
    • pp.1-13
    • /
    • 2023
  • Irrigation return flow plays an important role in river flow forecasting, basin water supply planning, and determining irrigation water use. Therefore, accurate calculation of irrigation return flow rate is essential for the rational use and management of water resources. In this study, EPA-SWMM (Environmental Protection Agency-Storm Water Management Model) modeling was used to analyze the irrigation return flow and return flow rate of each intake work using irrigation canal network. As a result of the EPA-SWMM, we tried to estimate the quick return flow and delayed return flow using the water supply, paddy field, drainage, infiltration, precipitation, and evapotranspiration. We selected 9 districts, including pumping stations and weirs, to reflect various characteristics of irrigation water, focusing on the four major rivers (Hangang, Geumgang, Nakdonggang, Yeongsangang, and Seomjingang). We analyzed the irrigation period from May 1, 2021 to September 10, 2021. As a result of estimating the irrigation return flow rate, it varied from approximately 44 to 56%. In the case of the Gokseong Guseong area with the highest return flow rate, it was estimated that the quick return flow was 4,677 103 m3 and the delayed return flow was 1,473 103 m3 , with a quick return flow rate of 42.6% and a delayed return flow rate of 13.4%.

Flood analysis for agriculture area using SWMM model: case study on Sindae drainage basin

  • Inhyeok Song;Hyunuk An;Mikyoung Choi;Heesung Lim
    • 농업과학연구
    • /
    • 제50권4호
    • /
    • pp.799-808
    • /
    • 2023
  • Globally, abnormal climate phenomena have led to an increase in rainfall intensity, consequently causing a rise in flooding-related damages. Agricultural areas, in particular, experience significant annual losses every year due to a lack of research on flooding in these regions. This study presents a comprehensive analysis of the flood event that occurred on July 16, 2017, in the agricultural area situated in Sindaedong, Heungdeok-gu, Cheongju-si. To achieve this, the EPA (United States Environmental Protection Agency) Storm Water Management Model (SWMM) was employed to generate runoff data by rainfall information. The produced runoff data facilitated the identification of flood occurrence points, and the analysis results exhibited a strong correlation with inundation trace maps provided by the Ministry of the Interior and Safety (MOIS). The detailed output of the SWMM model enabled the extraction of time-specific runoff information at each inundation point, allowing for a detailed understanding of the inundation status in the agricultural area over different time frames. This research underscores the significance of utilizing the SWMM model to simulate inundation in agricultural areas, thereby validating the efficacy of flood alerts and risk management plans. In particular, the integration of rainfall data and the SWMM model in flood prediction methodologies is expected to enhance the formulation of preventative measures and response strategies against flood damages in agricultural areas.

XP-SWMM 모형을 적용한 도시지역의 침수해석 (Flood Inundation Analysis using XP-SWMM Model in Urban Area)

  • 이종형;연기석
    • 한국방재학회 논문집
    • /
    • 제8권5호
    • /
    • pp.155-161
    • /
    • 2008
  • 도시유역은 자연하천유역에 비해 다른 유형의 홍수피해를 보여주고 있다. 최근에 불투수면적의 증가로 홍수도달시간의 감소와 높은 첨두유량의 발생을 가져오면서 도시홍수피해의 원인이 되고있다. 본 연구에서는 XP-SWMM모형을 적용하여 침수심, 침수 면적을 시간대별로 침수해석을 수행하였으며, 침수해석시 건물의 영향을 고려하였다. XP-SWMM모형의 보정 및 검증을 위해 두 개의 강우사상(2005.06, 2005.07)을 적용하였고, 하천 외수위의 변하는 HEC-RAS모형을 통해 산정하였다. 모의결과 실제 관측된 침수면적(21.41ha)에 비해 산정된 침수구역의 면적은 23.45%로서 9.5% 과다하게 모의되었다. 또한 XP-SWMM모형의 DTM(DigitalTerrain Model)을 구축하여 주요 시간대별 건물의 영향에 따른 침수범위를 분석하였다.

SWMM-LID를 이용한 저탄소 녹색마을의 LID-분산형 빗물관리 계획에 따른 물순환 효과 분석 (Analysis of Water Cycle Effect by Plan of LID-decentralized Rainwater Management Using SWMM-LID Model in a Low-carbon Green Village)

  • 이정민;현경학;이윤상;김정곤;박용부;최종수
    • 토지주택연구
    • /
    • 제2권4호
    • /
    • pp.503-507
    • /
    • 2011
  • 신도시 A에 저탄소 녹색 마을(약 40만$m^2$)을 개발하고자 한다. 저탄소 녹색 마을의 조성을 위해서는 수문 순환의 복원 또는 물순환의 복원은 필수적이다. 저탄소 녹색 마을의 자연계 물순환 복원을 위해 LID-분산형 빗물 관리 시설의 설치를 계획하였다. 물순환에 미치는 영향 분석은 저탄소 녹색마을 개발 이전과 개발 후, 그리고 LID 시설(빗물정원, 인공습지, 빗물이용시설 등)을 설치한 후의 조건에서 EPA에서 개발된 SWMM-LID 모델을 이용하여 수행하였다. 개발 전의 침투 영역의 특성, 개발 후의 상당한 녹지 공간 탓으로, 수문 순환을 복원하기 위한 LID 설치 계획은 뚜렷한 효과를 보여주지 않고 있다. 그러나 LID 시설 설치에 의한 물순환의 가능성을 볼 수는 있었다. 이는 본 연구에서 제시한 LID 시설의 설치 계획이 해당 개발 지역의 물순환을 위해서는 더 확대되어야 함을 의미한다.

도시지역 비점오염원 관리를 위한 SWMM의 적용 -포항시를 대상으로- (Application of SWMM for Management of the Non-point Source in Urban Area -Case Study on the Pohang City-)

  • 이재용;장성호;박진식
    • 한국환경보건학회지
    • /
    • 제34권3호
    • /
    • pp.247-254
    • /
    • 2008
  • Non-point source pollution that originates from surface applied chemicals in either liquid or solid form is a part of urban activities and it appears in the surface runoff caused by rainfall. This study investigates the characteristics of non point source pollution in relation to storm events and the first washing effect in the Study area, which is comprised of different land use types. Then, a Best Management Practices (BMP) model, for urban areas, is applied with the Storm water Management Model (SWMM) Windows Interface which was developed by the EPA in the USA. During the storm event analysis of the hydrographic and pollutographic data showed that the peak of pollutants concentration was within the peak flow, 30 to 60 minute into the storm event in the Study area. The results of simulation using SWMM Windows Interface, Structure Techniques as applied in the study were highly efficient for removal of pollutants. Predicted removal efficiency was 26.0% for SS, 22.1 for BOD, 24.1% for COD, 20.6% for T-N, and 21.6% for T-P, respectively.

SWMM-LID모델을 이용하여 도시 물순환 개선을 위한 유량 저감 효과 분석 (Analysis of Flow Reduction for improving Urban Water Cycle Using SWMM-LID Model)

  • 이태우;우원희;최계운
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2017년도 학술발표회
    • /
    • pp.217-217
    • /
    • 2017
  • 물 순환이란 물이 지표면으로부터 증발하거나 바다로부터 증발하여 습한 공기가 기단을 형성한 후 적합한 조건이 형성되면 강수를 초래하는 과정이라고 볼 수 있다. 여기서 강수는 여러 경로 즉, 증발산, 지표흐름, 침투, 침루 등을 통해 다시 순환과정을 거친다. 최근 도시화로 인한 불투수면적의 증가로 기후변화, 홍수지체시간 감소, 첨두 및 유출총량의 증가, 침투능 및 증발산량의 감소 등 자연하천의 유출특성과는 다른 유출특성이 나타나며, 물 순환 체계가 왜곡되어 지하수위는 낮아지고, 하천의 유량은 감소되는 등 하천의 정상적인 기능이 저하되고 있다. 이에 우리나라에서는 환경부 및 국토교통부 등 정부기관과 지방자치단체에서 법과 조례를 제정하여 저영향개발기법 (LID, Low Impact Development)을 적용하도록 권고하고 있으며 신도시 개발사업 시 왜곡된 도시의 물 순환체계를 개선하기 위하여 저영향개발기법을 적용하고 있다. 저영향개발 기법의 정량적인 효과를 검증하기 위해서는 미환경청 (U.S. EPA., United States Environmental Protection Agency)에서 개발한 SWMM모델을 이용하여야 한다. 본 연구에서는 도시화로 인해 왜곡된 물순환체계 개선을 위하여 다양하게 설계된 저영향개발기법의 정량적인 효율을 SWMM 모델을 통해 산정하고, 장기적인 측면에서 물순환 회복에 적합한 저영향개발기법의 배치 최적화를 제안하고자 한다.

  • PDF

XP-SWMM을 이용한 도시하천에서의 홍수소통능력 평가 (Assessment of Flood Flow Conveyance for Urban Stream Using XP-SWMM)

  • 홍준범;김병식;서병하;김형수
    • 한국수자원학회논문집
    • /
    • 제39권2호
    • /
    • pp.139-150
    • /
    • 2006
  • 최근 급속한 도시화로 인한 유역 내 불투수 면적의 증가는 자연유역에 비해 짧은 도달시간과 높은 첨두 홍수량을 유발하여 도시홍수 피해의 원인이 되고 있다. 따라서 홍수피해를 저감시키고자 구조물적 또는 비구조물적 홍수방어 대책들을 마련하여 시행하고 있다. 본 연구의 대상유역인 굴포천 유역은 유역 내의 유출 특성이 아닌 하류의 한강 외수위 조건에 의해 잦은 침수 피해가 발생하고 있으며, 이를 예방하고자 폭 20m의 임시 방수로를 폭 80m로 확장할 예정이다. 이에 따라 본 연구에서는 대표적인 도시 유출 모형의 하나인 EPA의 SWMM 모형을 근간으로 하는 XP-SWMM모형을 이용해 굴포천 방수로 확장에 따른 홍수소통능력을 분석하였다. 재현기간 100년인 설계 강우와 동일한 조위 조건 하에서 개수전과 후에 대한 수위와 유량을 비교하였으며, 분석결과 개수전 상황이 개수후에 비해 통과 유량이 1/3임에도 불구하고 비슷하거나 더 높은 수위를 나타내었다. 또한 개수후 상태에서 모의한 결과 방수로 분기점에서 자연 분류시킬 경우 최고 $300m^3/sec$ 가까운 유량이 방수로 방향으로 역류함을 확인할 수 있었다. 따라서 방수로의 안정적 운영을 위해서는 굴포천 하류로부터 방수로로의 역류를 차단하기 위한 수리 시설물의 설치가 필요함을 확인할 수 있었다.

도시유역의 배수 밀도가 강우-유출에 미치는 영향 분석 (Influence of drainage density on rainfall-runoff in urban area)

  • 이진우;정건희
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2018년도 학술발표회
    • /
    • pp.379-379
    • /
    • 2018
  • 기후변화와 지구온난화로 인하여 전 세계적으로 폭우발생 빈도 및 강도가 증가하고 있다. 특히 유역 차원에서 도시화와 산업 개발로 인한 불투수면적 증가는 내수침수 증가로 이어지고 있다. 불투수면적이 높고 인구와 건물이 밀집되어있는 도시유역에서의 내수침수는 막대한 재산피해와 인명피해를 야기한다. 도시유역의 불투수층에 내린 강우는 지표면을 따라 흐르다가 대부분 우수관으로 유입되어 유역에서 배출된다. 그러므로 도시 우수관의 설계빈도를 결정하고 설계홍수량을 결정하는 일은 도시 홍수 저감을 위한 구조적인 대책 중 가장 우선적으로 고려되어야 하고, 또 가장 중요한 대책이기도 하다. 본 연구에서는 과거 홍수피해가 빈번히 발생했던 도시유역들 중 유역면적과 우수관망의 구조가 다른 7개의 도시를 선정하여 다양한 강우사상에 따른 유출해석을 실시하였다. 서울과 부산 기상관측소에서 관측된 1975년부터 2015년까지의 강우자료에 대한 EPA-SWMM 모형에서의 유출해석 결과 첨두강우량의 변화에 따른 첨두유출량의 변화를 선형회귀모형으로 분석하였다. 회귀모형의 결정계수와 95% 신뢰구간, 변동계수를 비교하였고, 수계밀도개념을 적용하여 첨두유출량의 변화를 해석한 결과, 우수관망이 조밀하게 건설되어 배수밀도가 높을수록 증가된 첨두강우량에 따라 함께 증가하는 첨두유출량의 예측이 상대적으로 정확하게 가능함을 확인하였다. 우수관의 구조적인 특성에 따른 유출 응답 속도를 고려하여 우수관을 설계한다면, 보다 효율적인 우수관 설계가 가능할 것으로 판단된다.

  • PDF

Estimation of stormwater interception ratio for evaluating LID facilities performance in Korea

  • Choi, Jeonghyeon;Lee, Okjeong;Lee, Jeonghoon;Kim, Sangdan
    • Membrane and Water Treatment
    • /
    • 제10권1호
    • /
    • pp.19-28
    • /
    • 2019
  • To minimize the impact of urbanization, accurate performance evaluation of Low Impact Development (LID) facilities is needed. In Korea, the method designed to evaluate large-scale non-point pollution reduction facilities is being applied to LID facilities. However, it has been pointed out that this method is not suitable for evaluating the performance of relatively small-scale installed LID facilities. In this study, a new design formula was proposed based on the ratio of LID facility area and contributing drainage area, for estimating the Stormwater Interception Ratio (SIR) for LID facilities. The SIR was estimated for bio-retentions, infiltration trenches and vegetative swales, which are typical LID facilities, under various conditions through long-term stormwater simulation using the LID module of EPA SWMM. Based on the results of these numerical experiments, the new SIR formula for each LID facility was derived. The sensitivity of the proposed SIR formula to local rainfall properties and design variables is analysed. In addition, the SIR formula was compared with the existing design formula, the Rainfall Interception Ratio (RIR).