• Title/Summary/Keyword: EPA SWMM

Search Result 68, Processing Time 0.031 seconds

Development of Urban Flooding Model: Coupling to EPA-SWMM Engine and Surface Flow Path Algorithm (EPA-SWMM과 지표수 흐름방향 결정 알고리즘을 결합한 도시침수 모형의 개발)

  • Lee, Seonmin;Kim, JongChun;Yoon, Hanui
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2021.06a
    • /
    • pp.305-305
    • /
    • 2021
  • XP-SWMM은 EAP-SWMM의 Runoff 기능을 보완하고 2D 해석 기능을 새롭게 추가하여 만든 외산(XP Solutions) 프로그램으로 도시유역 유출량 산정, 우수관거 추적 등과 같은 모의가 가능한 종합 모형이다. 그 중 2차원 분석 기능(2D XP-SWMM)은 연산 결과를 Tu-Flow 모형에 대입한 도시침수 해석모형으로 실무에서 주로 사용되고 있다. 그러나 XP-SWMM은 수량 부분 외에도 수질 부분의 다양한 모형이 통합되어 있어 라이센스 가격이 상당히 높고, 국내 환경에 적합한 모형 수정 등 기술지원을 받기 어렵다는 단점을 갖고 있다. 또한, 실무 활용성이 높은 2차원 분석기능의 경우 모의에 소요되는 시간이 크다는 한계점을 갖고 있다. 2D XP-SWMM 연산의 소요시간이 큰 주요 원인은 계산 시간간격마다 큰 셀수의 행렬 계산을 반복하기 때문이며, 격자를 촘촘하게 설정할수록(행렬의 수가 증가할수록) 수치해석에 소요되는 시간은 기하급수적으로 늘어나게 된다. 2D XP-SWMM 연산은 편미분방정식을 계산하는 모형으로 반복법을 채택하고 있기 때문에 짧은 시간내에 침수해석을 진행해야하는 웹기반 초단기 홍수예경보 시스템 등에 활용하기에는 적합하지 않다. 본 연구에서는 2D XP-SWMM 보다 연산속도를 향상시킨 2차원 도시침수 모형을 개발하였다. 기존 XP-SWMM 중심의 실무 적용성을 유지하고자 XP-SWMM과 동일하게 EPA-SWMM 엔진을 활용하였고 DEM 기반의 지표수 흐름방향 결정 알고리즘을 결합하였다. 본 연구에서 개발한 도시침수 모형 결과를 울산광역시, 청주시 등 도심지에서 발생한 과거 침수피해의 양상과 비교하여 그 타당성을 검증하였다.

  • PDF

Evaluation of the Effectiveness of Low Impact Development Practices in an Urban Area: Non-point Pollutant Removal Measures using EPA-SWMM (EPA-SWMM을 이용한 LID 기법의 비점오염 저감효과 분석)

  • Cho, SeonJu;Kang, MinJi;Kwon, Hyeok;Lee, JaeWoon;Kim, Sangdan
    • Journal of Korean Society on Water Environment
    • /
    • v.29 no.4
    • /
    • pp.466-475
    • /
    • 2013
  • Non-point source pollution management is one of the most important issues in Korean water quality/watershed management. In recent years, Low Impact Development (LID) has emerged as an effective approach to control stormwater in an urban area. This study illustrates how to design and evaluate the effect of non-point pollutant management using EPA-SWMM LID module and suggests design parameters for modeling LID facilities. In addition, optimal installation locations of LID can be determined by a simple distributed hydrologic model by using SWMM for a long-term.

Developing a SWMM-HYDRUS model for Enhanced simulation of Low Impact Developments (저영향 개발 모의 향상을 위한 SWMM-HYDRUS 결합 모델 개발)

  • Baek, Sangsoo;Cho, Kyunghwa;Pachepsky, Yakov
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2017.05a
    • /
    • pp.67-67
    • /
    • 2017
  • 급속한 산업화와 도시화로 인하여, 투수지역은 감소함으로써, 개발전과 다른 지표, 지표하 유출이 나타난다. 이에 대한 대안으로 최근 저영향개발 (LID)이 수문학적 및 환경, 생태적 개선으로 대안으로 대두 되고 있다. 이에 많은 연구자들이 EPA SWMM 모델의 이용하여 LID 설치 전, LID를 모의하였으나, 불포화토양 및 토양 내의 matric head에 대한 고려가 없어 정확한 LID 모의가 힘든 실정이다. 이에 본 연구에서 상세한 토양 모의가 가능 HYDRUS를 이용하여, SWMM-HYDRUS 모델을 개발하였다. EPA SWMM 모델의 경우, 가장 상단의 layer에서 green ampt equation을 이용하여 침투량을 계산 후, 다음 layer에서 Darcy eqation을 이용하여 토양 물이동을 계산되어진다. 하지만 기존의 SWMM모델의 경우, 불포화토양내의 물 흐름에 대한 고려와 Matric head와 Pond depth에 대한 고려가 없어, LID 모의 시 한계점이 나타났다. 이에 본 연구에서는 이러한 한계점을 개선하기 위하여, 기존의 EPA SWMM의 LID 모듈을 Van Genuchten's equaton과 Richard Equation을 이용하여 정확한 토양 물 흐름을 계산하는 HYDRUS을 SWMM 모델에 결합하여, 더욱 정확한 LID 모의를 실시하였다. 개선된 SWMM-HYDRUS 모델의 모의 결과, 기존의 SWMM에서 한계점을 보여주는 Metric head를 고려하여 불포화 침투가 이루어지며, 또한 포화 후 LID 위에 존재하는 Pond depth를 고려해주는 결과가 나타났다. 향후 개발된 SWMM-HYDRUS모델를 이용하여 LID를 검증 시 기존의 모델보다 정확한 모의가 가능하다.

  • PDF

Development of the model for predicting pollutants from the Low Impact Development (LID) (저영향개발(LID)의 비점오염물질 예측을 위한 모형 개발)

  • Baek, Sangsoo;Cho, KyungHwa;Pachepsky, Yakov
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2018.05a
    • /
    • pp.58-58
    • /
    • 2018
  • 지난 10년 동안, 저영향개발(LID)에 대한 관심이 증가해 왔다. LID는 도시 하천의 지속 가능성을 높이고 도시 홍수와 가뭄 및 비점오염에 대한 환경적 영향을 감소시켰다. 불투수지역이 확산됨에 따라 LID는 도시 지역의 홍수를 방지하고 수문학적 기능을 강화하기 위한 전략 중 하나로 제안되고 있다 최근 계속적인 도시화와 개발로 인해 불투수층이 증가함에 따라, 도시비점오염물질이 동반된 표면유출수가 증가하고 있다. LID는 도시 환경에서 많은 이점을 지니고 있지만 LID 구조물의 운영 및 관리와 설치에는 높은 비용이 필요하다. 반면에 수학적 모델은 적은 비용으로 LID의 수문학적 과정을 분석하고 예측할 수 있는 유용한 도구이다. EPA SWMM은 이러한 LID 예측 및 분석하는 데 많이 사용 되고 있으며, 도시 유출 관리에 널리 사용되고 있다. 하지만 EPA SWMM의 LID 모듈의 경우, LID내의 오염물질 모의를 위한 기작이 없다. 이러한 점은 LID를 이용하여, 비점오염물질 저감을 예측하기에는 한계점을 보여준다. 이에 본 연구에서는 이러한 문제점을 개선하기 위하여, EPA SWMM LID 모듈에 오염물질 거동 기작을 추가하였다. 개발된 모형은 Bioretention과 infiltration trench를 모의를 하였으며, 모의 오염물질로는 TSS, TN, TP, COD 이다. 모의 결과 모델이 자연현상을 잘 모의 하고 있음을 보여주었다. 향후, 이 모형을 이용하여 도시 내 LID 시설의 오염물질 예측이 가능할 것으로 예상된다.

  • PDF

Estimation of irrigation return flow in agricultural reservoirs using EPA-SWMM (EPA-SWMM 모델을 활용한 관개회귀수량 추정)

  • Ji-Hyeon Shin;Won-Ho Nam;Dong-Hyun Yoon;In-Kyun Jung;Kwang-Ya Lee
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2023.05a
    • /
    • pp.50-50
    • /
    • 2023
  • 농업용수는 우리나라 수자원 사용량 중 약 61%를 차지하고 있으며, 효율적인 수자원 관리를 위한 핵심적인 관리목표 중 하나이다. 논으로 공급되는 관개용수는 필지에서의 증발산량 및 침투량과 용배수로를 통한 자연적 및 인위적인 배수량으로 소비된다. 관개회귀수량 (irrigation return flow)은 관개를 통해 농경지에 공급된 수량 중 증발산에 의해 소비되지 않고 침투 또는 배수 등을 통해 하천으로 회귀되는 수량이다. 관개회귀수량 및 회귀율은 농업용수 물순환 관리에 중요한 역할을 하며, 관개용수 사용량 결정, 합리적인 용수의 공급과 수요 관리계획 및 수질 관리계획 등에 중요한 요소로 작용한다. 하지만, 기상, 작물, 토양 등의 물리적 요소와 농업용수 공급량, 물꼬 조절, 담수심 관리 방식 등 인위적 요소의 영향을 동시에 받기 때문에 그 기작이 복잡한 특징을 갖는다. 따라서, 합리적인 수자원 개발 계획 및 관리를 위해 정확한 관개회귀수량 추정 연구가 필수적이다. 본 연구에서는 전국 4대강 (한강, 금강, 낙동강, 영산강·섬진강) 권역 중심의 9개 대상지구를 선정하였으며, EPA-SWMM (Environmental Protection Agency-Storm Water Management Model) 모델 기반 수로 네트워크 모의를 활용한 수원공 단위 관개회귀수량을 산정하고자 한다. EPA-SWMM 모의 시 공급량은 농업기반시설관리시스템 (Rural Infrastructure Management System, RIMS) 저수율 자료와 수원공 단위용수량을 활용하였으며, 모의결과 시점부 공급량 및 배수량과 강수량, 증발산량 및 침투량을 활용하여 신속회귀수량과 지연회귀수량을 추정하였다. 본 연구 결과는 최적 농업용수 공급방안에 대한 기초자료 구축에 활용 가능할 것으로 사료된다.

  • PDF

Cost-Effectiveness Analysis of Low-Impact Development Facilities to Improve Hydrologic Cycle and Water Quality in Urban Watershed (도시유역의 물순환 및 수질 개선을 위한 저영향개발 시설의 비용 효율 분석)

  • Choi, Jeonghyeon;Kim, Kyungmin;Sim, Inkyeong;Lee, Okjeong;Kim, Sangdan
    • Journal of Korean Society on Water Environment
    • /
    • v.36 no.3
    • /
    • pp.206-219
    • /
    • 2020
  • As urbanization and impermeable areas have increased, stormwater and non-point pollutants entering the stream have increased. Additionally, in the case of the old town comprising a combined sewer pipe system, there is a problem of stream water pollution caused by the combined sewer overflow. To resolve this problem, many cities globally are pursuing an environmentally friendly low impact development strategy that can infiltrate, evaporate, and store rainwater. This study analyzed the expected effects and efficiency when the LID facility was installed as a measure to improve hydrologic cycle and water quality in the Oncheon stream in Busan. The EPA-SWMM, previously calibrated for hydrological and water quality parameters, was used, and standard parameters of the LID facilities supported by the EPA-SWMM were set. Benchmarking the green infrastructure plan in New York City, USA, has created various installation scenarios for the LID facilities in the Oncheon stream drainage area. The installation and maintenance cost of the LID facility for scenarios were estimated, and the effect of each LID facility was analyzed through a long-term EPA-SWMM simulation. Among the applied LID facilities, the infiltration trench showed the best effect, and the bio-retention cell and permeable pavement system followed. Conversely, in terms of cost-efficiency, the permeable pavement systems showed the best efficiency, followed by the infiltration trenches and bio-retention cells.

A Study on the Proper Size of Rainwater Stored Tank in Submerged Districts Using SWMM Program (SWMM을 활용한 침수예상지역 우수저류조의 적정크기결정에 관한 연구)

  • Jang, Seung-Jae
    • Journal of the Korean housing association
    • /
    • v.20 no.3
    • /
    • pp.69-76
    • /
    • 2009
  • The Storm Water Management Model(SWMM) by EPA is a dynamic rainwater-runoff simulation model used for single event or long-term simulation of runoff quantity and quality from primarily urban areas. The SWMM simulation program is operated by the site area, the weather date, conduit plan etc. on reference region. The purpose of this study was to analyze flood area, the duration of flooded and surcharged on the reference region. Without rainwater stored tank, the area of flooded and surcharged on reference area is similar to the area of reference region. But, With rainwater stored tank, the area of flooded and surcharged on reference area is much reduced compared to without rainwater stored tank. According to SWMM simulation results, the rainwater stored tank is located closer to site is more effective for reduction of duration of flooded and surcharged and flow rate.

A Simulation of the Runoff and the NPS Pollutants Discharge using SWMM Model (SWMM 모형을 이용한 도시 유역의 유출 및 NPS 오염물 배출 모의)

  • 신현석;윤용남
    • Water for future
    • /
    • v.26 no.3
    • /
    • pp.125-135
    • /
    • 1993
  • This study was conducted for two purposes. The first was the selection of the proper model for the urban runoff, and NPS(non-point source) loads and the second was the adjustment of the selected model through the calibration and the verification of the observed data on an urban drainage basin. The selected model for this study was the Storm Water Management Model(SWMM) developed and maintained by the US Environmental Protection Agency(EPA). In particular, the Runoff Block for the surface discharge and the Transport Block for the flow routing was used. The study basin is Youngdu basin, which is a typical developed urban drainage basin. The four rainfall events for the runoff and the two for the four NPS pollutants(SS, BOD, COD and TN) were used for the calibration and the estimation of the model parameters. This study performed the calibration with regard to the peak discharge, the time to peak discharge, the volume and the relative error for three items. It was shown that SWMM can successfully be used for the prediction of the runoff and the NPS pollutants discharge. The result of this study can be used as the basis for the analysis of the correlation between the runoff and the NPS pollutants discharges, and the analysis of the mass balance with the monthly and annual NPS loads in an urban drainage basin.

  • PDF

Analysis of runoff according to the time and space characteristics of hourly rainfall data in Seoul (서울 강우자료의 시·공간적 특성에 따른 유출분석)

  • Hyun, Jung Hoon;Park, Hee Seong;Chung, Gun Hui
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2019.05a
    • /
    • pp.216-216
    • /
    • 2019
  • 최근 이상 기후로 인하여 홍수피해가 많이 발생 하고 있다. 특히 도시유역의 도시화로 인해 불투수면적이 증가하여 내수 침수도 증가하였다. 이로 인하여 재산피해와 인명피해가 증가하면서 전 세계적으로 홍수 저감 연구가 진행 되고 있다. 강우의 시 공간적인 특성을 파악 하여 강우 사상을 정의 한다면 도시홍수 저감 에 있어 도움이 될 것이라 판단된다. 우리나라 서울 지역의 설계 강우량을 산정하기 위해 서울기상청에서 제공하고 있는 ASOS(Automated Surface Observing System) 를 사용해 왔다. 하지만 ASOS을 사용하게 되면 강수량의 공간 특성을 고려하기 어렵지만 AWS(Automatic Weather Stations) 는 세밀한 관측망을 가지고 있어 공간적 특성을 고려할 수 있다. 본 연구에서는 서울 기상청에서 제공하고 있는 강우 자료의 20개년 연속된 강우자료를 통해 강우자료를 구축 하였다. 서울지역의 유역을 선정하였으며 도시유역 강우-유출 해석에 많이 사용되는 EPA-SWMM 모형에 ASOS 와 AWS 강우자료를 적용하여 유출 분석을 하였다. 이러한 자료를 바탕으로 공간 특성 분석을 실시하여 더욱 세밀한 설계 강우량 산정에 도움을 있을 것으로 판단된다.

  • PDF