• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2000년도 창립총회 및 춘계학술발표회
• /
• pp.33-36
• /
• 2000

The purpose of this study investigated underground oil storage(USTs) and Landfill using the envi-cone penetrometer system. The electrical resistivity sensor, pH sensor, ORP sensor, and thermometer are installed in envi-cone penetrometer system. This envi-cone penetrometer system provides a continuous profile of measurements, and it is rapid, repeatable, reliable and cost effective for investigation of contaminated ground.

• 한국지리정보학회지
• /
• 제17권2호
• /
• pp.156-172
• /
• 2014

본 연구는 미기후 분석 프로그램인 ENVI-met 모델의 정확도를 검증하기 위해 경상남도 창원시를 대상으로 도시지역의 주요 토지이용 유형별 공간특성을 고려하여 선정된 조사구역의 현장측정 기상자료와 비교하였다. 현장측정은 주간시간대 2일, 야간시간대 1일 총 3일간이동식으로 측정하였고, ENVI-met 모델링은 현장측정과 동일한 시간대로 설정하여 수행하였다. 측정항목별 분석결과에 따르면, 주간시간대의 순복사에너지는 ENVI-met 모델링이 현장측정값보다 약 $300Wm^{-2}$ 정도 높았고, 야간시간대는 현장측정값이 $200Wm^{-2}$ 정도 더 높았다. 기온은 주간 및 야간 시간대 모두 현장 측정값이 약 $3{\sim}6^{\circ}C$ 정도 더 높은 것으로 분석되었다. 표면온도도 현장측정값이 ENVI-met 모델링보다 약 $7{\sim}13^{\circ}C$ 더 높았다. 풍속은 ENVI-met 모델링과 현장측정값 간의 차이가 매우 큰 것으로 나타났다. 회귀분석 결과에서는 기온자료의 $R^2$값이 약 0.6정도로 비교적 높게 나타난 반면에, 나머지 순복사에너지와 표면온도, 풍속은 낮은 상관성을 보였다. 이는 ENVI-met 모델링이 태양 및 지구복사에너지를 과대 또는 과소 예측하고 있으며, 모델링 및 현장측정을 위해 선정된 조사구역들을 둘러싸고 있는 인접한 주변 지역의 공간구조적, 미기후적 특성 차이에 의한 영향으로 판단된다. 따라서 향후 이에 대한 보다 면밀한 실증적 연구가 필요할 것으로 판단된다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.273-280
• /
• 2000

In recent years there has been a steady increase in geoenvironmental engineering projects where geotechnical engineering has been combined with environmental concerns. Many of these projects involve some investigation of contaminant in the ground. There are many techniques such as geophysical, drilling, sampling, md pushing techniques for investigation of contaminated ground. The most rapidly developing site characterization techniques for geoenvironmental purposes involve direct push technology, that is, penetration tests. The purpose of this study investigated underground oil storage tanks(USTs) using the envi-cone penetrometer system. The electrical resistivity sensor, pH sensor, ORP sensor, and thermometer are installed in envi-cone penetrometer system. This envi-cone penetrometer system provides a continuous profile of measurements, and it is rapid, repeatable, reliable and cost effective for investigation of contaminated ground surrounding the underground oil storage tanks.

• 환경영향평가
• /
• 제21권3호
• /
• pp.417-429
• /
• 2012

In this study, a diagnostic wind model, CALMET and a micrometeorological numerical model, ENVI-MET were used to analyze the wind field in and out of the site designated for the industrial complex around Buron-myeon, Wonju, Gangwon-do. The results of modeling with CALMET showed that the air flow in industrial complex was little affected by the surrounding terrain. And the result of wind field analysis with ENVI-MET showed there are turbulent air flows such as cavity and wake around structures in the industrial complex, which can cause high-air pollution. Therefore, it is necessary to design the industrial complex considering the wind path according to wind directions.

• 한국농림기상학회지
• /
• 제15권1호
• /
• pp.17-25
• /
• 2013

본 연구는 복잡한 산악지형에서 바람장 변화를 해석하고, 산불발생시 확산방향을 예측하여 산불방지 전략에 활용하기 위해서 수행되었다. 연구 대상지는 2000년 4월 7일 산불이 발생하여 10일간 진행되었던 삼척지역을 대상으로 하였다. 삼척 산불피해지는 복잡한 산악구조를 가지고 있는데 먼저 중규모 기상 모델인 WRF를 사용하여 대상지에 설치한 AWS(4 지점)의 관측결과와 비교하였다. WRF 모의 결과, 4개 지점의 풍속은 AWS 관측지점의 풍속에 비해 5~8m/s(200% 과대평가) 강하였으며, 관측된 풍향은 지점마다 다양하게 나타난 것에 비해 모의된 풍향은 모든 지점에서 서풍계열로 나타났다. 결과적으로 WRF와 같은 중규모 기상모델은 복잡한 산악지형에서의 바람장 변화를 잘 모의하지 못하였다. 이러한 문제점을 해결하기 위해 미기상 대기유동장 수치모형인 ENVI-met 프로그램을 이용하여 지표면 높이에서 삼척 LTER 지역의 국지규모 바람장을 모의하였다. 지형효과에 의한 모델의 민감도를 위해 다양한 초기 조건(기류, 온 습도, 대기난류, 토양 및 식생 모형)들을 고려하여 분석하였다. ENVI-met 모의결과, 풍속은 실측과 비교할 때 약 70%의 정확도를 보였으며, 풍향은 계곡부와 능선부에서 지형효과로 인한 변화를 잘 반영하였다. 향후 ENVI-met은 산불확산예측 및 산불방지전략 수립을 위해 미기상 대기유동장 수치모형을 이용하여 산악지역의 미기상 해석에 관한 연구가 필요할 것으로 판단된다.

• KIEAE Journal
• /
• 제16권1호
• /
• pp.11-19
• /
• 2016

Purpose: PMV, PET, and similar thermal comfort indices and microclimate modeling have recently become actively used to evaluate thermal comfort. This study will look at pedestrian roads with diverse spatial characteristics on university campus using the ENVI-met model as the base for onsite measurement. Method: The PET was used as the thermal comfort index. The first microclimate measures were collected on September 20, 2014, and the second microclimate measures were collected on June 1, 2015. The ENVI-met model was used at the same time. Result: As a results, Onsite measurement results differed depending on the PET spatial characteristics. The location associated with the most discomfort had a PET of $47.8^{\circ}C$. The spatial characteristics of this place included a with no shade. The most comfortable location had shade, and the PET was $24.6^{\circ}C$. When the ENVI-met model and onsite measurements were compared, similar patterns were found, but with a few differences at specific points; this was due to the limitation of using input materials such as trees, buildings, and covering materials with the ENVI-met model. This factor must be thoroughly considered when analyzing modeling results.

• 한국환경과학회지
• /
• 제18권9호
• /
• pp.941-952
• /
• 2009

The urban microscale wind field around the air quality monitoring station was investigated in order to check how a building complex influences it. For this study as the high density areas Jwa-dong and Yeonsan-dong monitoring sites in Busan were chosen. As the direction of inflow which is perpendicular to the building of the monitoring station was expected to cause the considerable variation of the wind field, that direction was selected. The model Envi-met was used as the diagnostic numerical model for this study. It is suitable for this investigation because Envi-met has the microscale resolution. After simulating it, on the leeward side around a building complex the decrease of flow velocity and some of vortexes or circulation area were discovered. In addition, on the edge of the top at the building and at the back of the building the upward flow was developed. If the sampling hole of monitoring site were located in this upward flow, it would be under the influence of upward flow from the near street.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 가을 학술발표회 논문집
• /
• pp.247-254
• /
• 1999

In recent years there has been a steady increase in geoenvironmental engineering projects where geotechnical engineering has been combined with environmental concerns. Many of these projects involve some investigation of contaminant in the ground. There are many techniques such as geophysical, drilling, sampling, and pushing techniques for investigation of contaminated ground. The most rapidly developing site characterization techniques for geoenvironmental purposes Involve direct push technology, that is, penetration tests. In this study, the envi-cone penetrometer system is developed by modification of traditional cone penetration test. The electrical resistivity sensor, pH sensor, thermometer are installed in envi-cone penetrometer system. This envi-cone penetrometer system provides a continuous profile of measurements, and it is rapid, repeatable, reliable and cost effective.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2004년도 추계학술대회 논문집
• /
• pp.159-160
• /
• 2004

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2008년도 추계학술대회 논문집
• /
• pp.394-396
• /
• 2008