• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제55권1호
• /
• pp.54-60
• /
• 2006

A power limiting algorithm is proposed for stable operation of grid-connected inverter in case of grid voltage unbalance considering the operation limit of inverter. During the voltage unbalance the control performance of Inverter. is degraded and the output power contains 120Hz ripple due to the negative sequence of voltage. In this paper, conventional dual sequence current controller is implemented to solve these problems using separated control of positive and negative sequence. Especially the maximum power limit which guarantees the maximum rated current of the inverter is automatically calculated as the instant grid voltage changes. As soon as the voltage recovers the proposed algorithm can return to the normal power control mode accomplishing low voltage ride through. Proposed algorithm is verifed using PSCAD/EMTDC simulations and tested experimentally at 4.4kW wind turbine simulator set-up.

• 대한전기학회논문지:전력기술부문A
• /
• 제50권3호
• /
• pp.140-145
• /
• 2001

The instantaneous voltage drop is occurred when the fault is happened on the nearby feeders. The instantaneous voltage drop is continued during relatively short period. But, the effect of it can be very severe to some sensitive devices. That is, it can be the reason of restart or malfunction of some devices. And these phenomenons can cause the enormous economical damage and shorten the lifetime of the devices. In this paper, the device which can compensate the instantaneous voltage drop, is studied. Through the computer simulation using PSCAD/EMTDC, the validity of the control algorithm using peak detection method is verified. And the Dynamic Voltage Restorer(DVR) prototype is designed and constructed. Through the experiment, the function and performance of the DVR prototype is verified.

• 대한전기학회논문지:전력기술부문A
• /
• 제55권3호
• /
• pp.102-108
• /
• 2006

This paper proposes a 36-pulse back-to-back voltage source converter using four sets of 12-pulse bridges with pulse-Interleaving auxiliary circuit. The proposed back-to-back voltage source converter has an independent control capability of active power and reactive power at the at connection point. The principle of increasing the number of pulses was analyzed using theoretical approach. The operational feasibility of proposed system was verified through computer simulations with PSCAD/EMTDC software. The proposed back-to-back converter can be widely used for the HVDC and FACTS devices.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2017년도 전력전자학술대회
• /
• pp.116-117
• /
• 2017

본 논문에서는 전압 민감도를 통해 직류 마이크로그리드의 전압 변동을 최소화하기 위한 드룹 제어 전원의 위치 선정 기법을 제시한다. 전압 민감도를 도출하기 위해 전력 흐름 분석을 수행하였으며, 드룹 제어의 특성을 반영하기 위해 드룹 버스를 도입하였다. 그러나 드룹 버스를 적용함으로써 전력망의 전압 민감도는 드룹 제어 전원의 위치에 의존하게 된다. 따라서 드룹 제어 전원의 위치에 따른 전압 민감도를 분석하고 이를 비교하여 DC MG의 평균 전압 변동이 최소화되는 위치를 결정하였다. 제안한 드룹 제어 전원의 위치 선정 기법의 결과를 PSCAD/EMTDC 시뮬레이션을 통해 검증하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
• /
• pp.2435-2437
• /
• 2005

전력시스템의 규모는 날로 증가하고 부하조건 역시 매우 다양해져 많은 수의 전력변환 장치가 사용되고 있으며, 변환장치에 사용되는 비선형성 전력반도체 소자의 사용은 고조파의 발생을 가져온다. 또한 대규모 부하의 초기기동에 의한 전압강하(Voltage Sag)가 일어나게 되어 전력시스템에 좋지 않은 영향을 주게 되며 고조파와 함께 전력의 품질저하 또는 기계적 오작동 등을 가져다 준다. 본 논문에서는 이런 전압, 전류의 전력품질 저하를 보상하기 위해 Active Filter를 적용한 예를 PSCAD/EMTDC 시뮬레이션 프로그램을 이용하여 시스템 해석을 실시하였다. 본 연구를 통해 직 병렬 동시적용 Active Filter의 유용성을 확인할 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.856-858
• /
• 1996

This paper describes a simulation model to analyze the interconnection operation of battery energy storage system(BESS) and utility system. The computer model used to these analysis composed by using PSCAD/EMTDC. The impacts experienced at load side are studied when occur faults in utility system, and also harmonics analysis are implemented. Results of these study are available to design the harmonic filter.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전력기술부문
• /
• pp.337-340
• /
• 2003

This paper describes the operational characteristics of protection algorithm applied in distributed generations(DG) for faults occurred in the interconnected distribution networks. The DG can be Influenced by abnormal grid conditions such as disturbances occurring in the neighboring distribution feeders as well as the interconnected power line. Particularly, in case of the fault happening in the neighboring distribution feeders emanated from the substation to which DG is connected, the protective devices in the DG might mis-operate. The mis-operation of protective devices can be varied by the fault conditions. The simulation results for Hoenggye substation model composed of five feeders using PSCAD/EMTDC showed that the number of mis-operation of protective devices applied in DG is about 0.66 times per one year.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 춘계학술대회 논문집 에너지변화시스템부문
• /
• pp.209-211
• /
• 2009

본 논문에서는 고효율 DC-DC 컨버터와 인버터에 의한 연료전지발전용 전력변환기를 제안한다. 제안하는 전력변환기는 Boost Converter와 LLC공진 컨버터의 2 stage 조합으로 구성되어 있다. 제안하는 전력변환기의 동작을 분석하기 위해 PSCAD/EMTDC를 이용하여 연료전지의 출력 동특성을 나타내는 모델과 제안하는 전력변환기의 모델을 개발하였다. 시뮬레이션모델의 검증을 위해 하드웨어장치를 구성하여 실험을 실시하였다. 제안하는 전력변환기는 정격출력에서 저전압특성을 갖는 연료전지를 전력계통에 고효율로 연계하는데 유용할 것으로 보인다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.73-74
• /
• 2007

For a safe operation of HVDC systems, the fault location and clearance of faults in the HVDC lines are important. Past methods for fault location on HVDC cable depend on existence of assistance cables and fault resistance, broken cable and environment of fault location. For complement these problems, in this paper, fault location method using traveling wave and cross correlation function is proposed for HVDC cables. Voltage controlled source and current controlled source HVDC were modeled by EMTDC/PSCAD. The proposed algorithm were verified varying with fault distance, fault resistance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.160-161
• /
• 2007

This paper describes the development of a single-phase DVR(Dynamic voltage Restorer), which is composed of H-bridge inverter and super-capacitors. The operational feasibility was verified through computer simulations with PSCAD/EMTDC software, and experimental works with 3kVA prototype. The developed system can compensates the input voltage sag and interruption within 2ms, in which the maximum allowable duration of voltage interruption is 1.5 seconds. It can be effectively used to compensate the voltage interruption in the sensitive load, such as computer, communication equipment, automation equipment, and medical equipment. The developed system has a simple structure to be easily implemented with commercially available components and to be highly reliable in operation.