• 폴리머
• /
• 제25권3호
• /
• pp.367-374
• /
• 2001

여러 가지 탄소함유가스로부터 Ni 및 Ni-Cu의 합금촉매를 사용하는 화학증착반응에 의해 제조한 나노탄소섬유를 충전재로 하고, poly(vinylidene fluoride) (PVDF)를 매트릭스로 이용하여 복합재를 제조하여 전자파 차폐성능을 조사해보았다. 전자파 차폐용 충전재의 중요한 물성치인 나노탄소섬유의 전기전도도는 10000psi 압력에서 4.2∼22.4S/cm 사이에 분포하였다. 나노탄소섬유/PVDF 복합재의 전기전도도는 0.22∼2.46 S/cm 사이에 값을 보였고, 전자파 차폐성능은 2∼13 dB 범위를 나타내었다. 나노탄소섬유의 전기전도도는 열처리 온도와 시간의 증가에 따라 높아지지만, 얻어지는 복합재의 전기전도도는 초기에 급속한 증가 후 일정해지는 경향을 나타내었다. 복합재의 전자파 차폐성능은 열처리 온도와 시간의 증가에 따라 증가하다가 감소하였고, 복합재의 전기전도도에 비례하였다. 열처리가 진행됨에 따라 나노탄소섬유의 비표면적이 감소하였으며, 전자파 차폐성능에 충전재의 전기전도도 외에 비표면적이 중요한 변수임을 알 수 있었다.

• 한국산업안전학회:학술대회논문집
• /
• 한국안전학회 2002년도 추계 학술논문발표회 논문집
• /
• pp.29-33
• /
• 2002

산업의 고도화에 따라 반도체를 비롯한 전자산업의 발전과 더불어 전자파의 인체 유해성에 대한 EMI 규제가 더욱 강화되고 있으며 반도체 소자나 정밀기기의 ESD 기술이 요구되고 있다. 따라서 전기전도성 고분자는 유해전자파의 차폐나 정전기 방지를 위한 특수용도의 소재로 각광받고 있으며 그 수요가 급증하고 있다.(중략)

• 한국정밀공학회지
• /
• 제27권7호
• /
• pp.71-78
• /
• 2010

The objective of this research is to investigate the influence of material characteristic and design on to the electromagnetic interference (EMI) shielding characteristics. Basalt glass fiber reinforced composite specimens with stainless fiber conductive filler were manufactured to perform the electromagnetic interference shielding effectiveness(SE) experiments. In order to reflection and absorb the specimen in electromagnetic fields, flanged coaxial transmission line sample holder was fabricated according to ASTM D 4935-89. Electromagnetic shielding effectiveness(EMSE) was measured quantitatively to examine the electromagnetic shielding characteristics of designed specimens. The result of EMI shielding experiments showed that maximum EMSE value of sandwich type specimens with GSG(basalt glass fiber/stainless fiber/basalt glass fiber) and SGS(stainless fiber/basalt glass fiber/stainless fiber) were 65dB and 80dB at a frequency of 1,500MHz, respectively.

• 한국정밀공학회지
• /
• 제23권8호
• /
• pp.100-107
• /
• 2006

The objective of this research is to investigate the electromagnetic interference(EMI) shielding characteristics of fiber reinforced composites. We fabricated glass and carbon fiber reinforced composites filled with metal powder and nano carbon black. The measurements of shielding effectiveness(SE) were carried out frequency range 300MHz - 1GHz for commercial purposes such as electric or telecommunication devices. The return loss and loss due to absorption were also measured as a function of frequency in the micro wave(300MHz-1GHz) region. It is observed that the SE of the composites is the frequency dependent, increase with the increases in filler loading. The Mg metal powder filled composite showed higher SE compared to that of carbon black. The Mg metal powder/epoxy composite was shown to exhibit up to 40dB of SE. The results indicates that the composite having higher filler loading can be used for the purpose of EMI shielding as well as for some microwave applications.

• 한국재료학회지
• /
• 제16권5호
• /
• pp.285-291
• /
• 2006

Copper powders have been widely used in electrically conductive coatings, electrode materials et al. and are very prospective since they are cheaper than noble metal powders such as silver or palladium. In this study, copper powders for metal filler of EMI shielding have been prepared using a solvothermal process from $CuSO_4$, NaOH, Glucose, mixed solvent ($H_2O$: Ethanol) and hydrazine which was used as a reducing agent at various reaction conditions. The prepared copper powders showed finely dispersed spherical shape without agglomerate, uniform morphology, narrow size distribution, high purity and were about 400-700 nm in size. The prepared powders were characterized using XRD, SEM, TGA, XPS, particle size measurement and EMI shielding efficiency.

• Carbon letters
• /
• 제9권4호
• /
• pp.298-302
• /
• 2008

Carbon blacks could be used as the filler for the electromagnetic interference (EMI) shielding. The poly vinyl alcohol (PVA) and polyvinylidene fluoride (PVDF) were used as the matrix for the carbon black fillers. Porous carbon blacks were prepared by $CO_2$ activation. The activation was performed by treating the carbon blacks in $CO_2$ to different degrees of burnoff. During the activation, the enlargement of pore diameters, and development of microporous and mesoporous structures were introduced in the carbon blacks, resulting in an increase of extremely large specific surface areas. The porosity of carbon blacks was an increasing function of the degree of burn-off. The surface area increased from $80\;m^2/g$ to $1142\;m^2/g$ and the total pore volume increased from $0.14073\;cc{\cdot}g^{-1}$ to $0.9343\;cc{\cdot}g^{-1}$. Also, the C=O functional group characterized by aldehydes, ketones, carboxylic acids and esters was enhanced during the activation process. The EMI shielding effectiveness (SE) of raw N330 carbon blacks filled with PVA was about 1 dB and those of the activated carbon blacks increased to the values between 6 and 9 dB. The EMI SE of raw N330 carbon blacks filled with PVDF was about 7 dB and the EMI SE increased to the range from 11 to 15 dB by the activation.

• 한국재료학회지
• /
• 제8권5호
• /
• pp.444-449
• /
• 1998

EMI 차폐재를 이용하여 전자파 장해를 극복하는 방법에는 금속판을 이용하는 방법과 플라스틱 표면에 전도층을 형성하는 방법, 전도성 충진제를 플라스틱에 혼입하는 방법이 대표적으로 사용되고 있으나 각각의 방법마다 장단점이 존재하기 때문에 많은 연구들의 목적은 전자 기기 본체의 무게를 증가시키지 않고 최대한 전자파 차폐 효율을 높이는 물질 개발에 목적을 두고 있다. 이러한 목적을 위하여 본 연구에서는 비중이 낮고 판상형인 운모 분체 펴면 위에 무전해 니켈 도금을 시행하므로써 전도성을 지니는 금속화운모를 제조하여, 이를 EMI차폐용 분체로서 사용하였다. 또한 이 EMI 차폐용 분체의 특성을 고찰 하였다. 미분체 운모 표면에 무전해 니켈막 금속화운모 미분체를 도료화하여 전자파 차폐 효과를 측정한 결과 최고 63dB를 나타내었다. 이 값은 구리 금속판을 이용한 전자파 차폐의 90dB에는 못 미치지만, 도포 횟수를 6회 이상 시행했을 경우 전자파 차폐 효과가 약 10dB 정도가 증가함을 알 수 있었고, 넓은 범위의 전자파 차폐 효과를 거둘 수 있는 특징이 있다.

• 한국기계가공학회지
• /
• 제7권4호
• /
• pp.10-16
• /
• 2008

This study investigated electromagnetic interference(EMI) shielding effectiveness(SE) of the aluminum film, conductive fabric and nano carbon black carbon fiber reinforced composites. We fabricated carbon fiber reinforced composites filled with nano carbon black where they bonded aluminum film and conductive fabric. The measurements of SE were carried out frequency range from 300MHz to 1.5GHz. It is observed that the SE of the bonded aluminum film and conductive fabric composites is the frequency dependent, increase with the increase in filler nano carbon black content. The aluminum film bonded composites showed higher SE compared to that of carbon black and conductive fabric. The aluminum film bonded epoxy composite was shown to exhibit up to 80dB of SE. The result that aluminum film bonded composite can be used for the purpose of EMI shielding as well as for some microwave applications.

• 한국분말재료학회지
• /
• 제21권2호
• /
• pp.124-130
• /
• 2014

The automotive industry is moving from the internal combustion engine to electric drive motors. Electric motors uses a high voltage system requiring the development of resources and components to shield the system. Therefore, in this study, we analyze electromagnetic interference (EMI) shielding effectiveness (SE) characteristics of an auto crash pad according to the ratio of electrically conductive materials and propylene. In order to combine good mechanical characteristics and electromagnetic shielding of the automotive crash pad, metal-coated glass fiber (MGF) manufacturing methods are introduced and compared with powder-type methods. Through this study, among MGF methods, we suggest that the chopping method is the most effective shielding method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1591-1593
• /
• 1996

The experimental study was carried out to investigate the effects of metallic particulate filler on the mechanical properties and the thermal properties of epoxy resin system filled with Cu powder. As Cu contents increased, the tensile strength, surface hardness and $T_d$ decreased. $T_g$ increased and decreased at 300 phr. $E_d$ decreased and increased at 200 phr, because the thermal conducting path of filler was formed and dissipated thermal stress.