• 전기학회논문지P
• /
• 제58권4호
• /
• pp.427-431
• /
• 2009

In this study, the dynamic characteristic of a contact wire and pantograph suppling electrical power to high-speed trains are investigated from an electrical response point of view. To analysis power line disturbance by induced contact loss phenomenon for high speed operation, a hardware Simulator which considered contact loss between contact wire and the pantograph as well as contact wire deviation is developed. It is confirmed that a contact wire and pantograph model are necessary for studying the dynamic behavior of the pantograph system. One of the most important needs accompanied by increasing the speed of high-speed train is reduced that an arc phenomenon by loss of contact brings out EMI. In case of a high-speed train using electrical power, as comparison with diesel rolling stock, PLD(Power Line Disturbance) such as harmonic, transient voltage and current, EMI(Electromagnetic Interference), dummy signal injection etc usually occurs. Throughout experiment, it is verified that an arc phenomenon is brought out for simulator operation and consequently conducted noise is flowed in electric circuit by power line disturbance.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.544-548
• /
• 2008

Typically electronic resistance type sensors have been used for measurement system of high-speed trains. But due to a large number of measurement quantities, we had difficulties in installing and maintaining the cables that connect sensors and measuring devices. Furthermore, signals obtained from the electronic resistance type sensors are often distorted because the sensors and cables are vulnerable to electro-magnetic interference (EMI). In this paper the characteristic of FBG sensors are compared with those of electronic resistance type sensors in application for the measurement system of high-speed trains. FBG sensors have advantages because of their multiplexing characteristic and robustness to EMI environment.

• Composites Research
• /
• 제35권3호
• /
• pp.175-181
• /
• 2022

무선통신기술의 발전과 함께 통신기기의 활용영역은 기하급수적으로 증가하고 있으며, 이에 따라 통신기기 성능의 저하를 막기 위한 전자파 노이즈 간섭문제 해결 및 방열문제 해결 소재에 대한 관심이 높아지고 있다. 본 연구에서는 전자파 차폐와 우수한 방열특성을 동시에 가질 수 있는 복합소재 필름을 제안하였다. 이 필름은 고분자 수지에 자성 및 방열 필러 물질이 분산된 복합소재 레이어와 전도성 그리드로 구성되어 있다. 복합소재 레이어의 조성 및 특성에 대한 제어 및 전도성 그리드 형상에 대한 설계를 통해 높은 전자파 차폐능(>40 dB), 낮은 전자파 반사능(<3 dB), 우수한 열전도도(>10 W/m·K)를 5G 통신 대역인 26.5 GHz에서 500 ㎛ 이하의 극박 필름으로 달성하는 데 성공하였다.

• Journal of Power Electronics
• /
• 제17권6호
• /
• pp.1683-1693
• /
• 2017

This paper analyses the harmonic pollution to power grids caused by thyristor-controlled devices. It also formulates a mathematic derivation for the voltage spikes in thyristor-controlled branches to explain the harmonic and EMI derived from the reverse-recovery characteristics of the thyristor. With an equivalent nonlinear time-varying voltage source, a detailed simulation model is established, and the periodic dynamic switching characteristic of the thyristor can be explicitly implied. The simulation results are consistent with the probed results from on-site measurements. An improved trigger system with gate-shorted circuit structure is proposed to reduce the voltage spikes that cause EMI. The experimental results indicate that a prototype with the improved trigger system can effectively suppress the voltage spikes.

• 한국정보통신학회논문지
• /
• 제19권7호
• /
• pp.1639-1645
• /
• 2015

UHD 고속영상 전송 시스템에서 EMI 특성은 특정 주파수 대역의 신호가 전기적, 구조적으로 주파수가 일치될 때, 에너지가 집중되고 신호의 흐름을 방해하여 왜곡이 발생하므로 시스템이 불안정해지는 원인이 된다. 이러한 신호의 왜곡을 제거하기 위하여 전원 무결성 분석과 EMI 현상에 대한 고주파 설계기법이 요구되어진다. 따라서 본 논문에서는 다층인쇄회로기판(MLB : Multi-Layer Printed Circuit Board) 구조에서 발생하는 고주파 잡음을 최소화하고 신호 무결성과 전원 무결성을 개선하면서 EMI를 억제하는 최적의 MLB 설계방법을 제안한다. 제안한 MLB의 특성 임피던스 파라미터는 비유전율 ε_r = 4.3, 고속영상 차동신호(HSVDS : High-Speed Vih = 0.145deo Differential Signaling)의 선로 폭 w = 0.203, 패턴의 간격 d = 0.203, 패턴의 두께 t = 0.0175, 베타층 위의 높이 를 고려하여 특성 임피던스 Zdiff = 100.186Ω으로 설계하였다. 실험결과 아이패턴의 출력 크기가 672mV, 지터는 6.593ps, 전송 주파수가 1.322GHz, 신호 대 잡음비는 29.62dB로 전송 품질이 개선 전보다 약 10dB 향상 되었다.

• 조명전기설비학회논문지
• /
• 제28권3호
• /
• pp.32-43
• /
• 2014

This paper presents the intra capacitance modeling according to the winding method, section bobbin and coil structure for hybrid choke coil capable of the EMI attenuation of broad bands from lower frequency bands to higher frequency bands and high frequency type common-mode choke coil capable of the EMI attenuation of high frequency band used in the EMI Block of LED-TV SMPS. In case of high frequency type CM choke coil, it can be explained the parasitic capacitance of A type and section bobbin type winding methods among them is much smaller than the other. The first resonant frequency of the proposed CM choke coil tends to increase as the parasitic capacitance becomes small and its impedance characteristics also show improved performance as the first resonant frequency increases. In case of hybrid choke coil using rectangular copper wire, it has investigated its parasitic capacitance compared to CM choke coil of conventional toroidal type becomes small. Also it has confirmed through the experiment results that CE margin and RE margin in frequency bands 0.5MHz to 5MHz and 30MHz to 200MHz are respectively 10dB and 15dB greater than that of conventional type in case of one stage EMI filter structure adopting hybrid choke coil compared to two stage EMI Filter structure using two of each CM choke coil used in the lower and higher frequency bands or two of CM choke coil used in only the lower frequency bands. In the future, the hybrid choke coil and CM choke coil of high frequency type show it can be practically used in not only LED/LCD-TV SMPS but also several applications such as LED Lighting, Laptop Adapter, Server Power Supply and so on.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.301-303
• /
• 2001

This paper proposes the boost input type active clamp DC-DC converter featuring the high efficiency and improved EMI characteristics. The main characteristic of the converter is to operate with the non-pulsating input and output currents. Besides, it has the zero-voltage switching (ZVS) and low voltage stress characteristics. For the proposed converter, the detailed operation principles and the simulation results are presented.

• 한국ITS학회 논문지
• /
• 제19권3호
• /
• pp.137-147
• /
• 2020

본 논문에서는 5G 이동통신 주파수 대역에서 자동차 전장품 전자기파 내성 평가를 위한 3 ~ 5 GHz 광대역 특성의 인쇄형 bow-tie 안테나를 제안하였다. 제안된 안테나는 2.75 ~ 6 GHz 주파수 대역에서 -10 dB 대역폭을 만족하였고, 공진 주파수 대역에서 S₁₁ 특성이 -16.2 dB 이하의 특성을 보이면서 방사 패턴은 broadside한 형태를 얻었다. 또한, 실제 5G 이동통신 주파수 대역에서의 전자기파 내성 평가를 수행함에 있어서도, 국제 표준에서 규제하는 VSWR 특성이 2.1 이하의 특성을 유지하면서도 기준 레벨인 1 W의 레벨을 문제없이 형성하였다. 이러한 결과를 통하여, 제안된 안테나는 5G 이동통신 주파수 대역에서 전자기파 내성 검증을 위한 평가용 안테나로 적용할 수 있음을 확인하였다.

• 전력전자학회논문지
• /
• 제19권1호
• /
• pp.8-14
• /
• 2014

This paper presents the intra capacitance modeling according to the winding method and section bobbin for CM choke capable of the EMI attenuation of broad bands from lower frequency bands to higher frequency bands and high frequency type common-mode choke capable of the EMI attenuation of high frequency band used in the EMI Block of LED-TV SMPS. In case of high frequency type CM choke, it can be explained the parasitic capacitance of A type and section bobbin type winding methods among them is much smaller than the other. The first resonant frequency of the proposed CM choke tends to increase as the parasitic capacitance becomes small and its impedance characteristics also show improved performance as the first resonant frequency increases. In the future, the CM chokes of high frequency type show it can be practically used in not only LED/LCD-TV SMPS but also several applications such as LED Lighting, Adapter and so on.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 추계학술대회 논문집 전기설비전문위원
• /
• pp.72-75
• /
• 2008

The Electromagnetic Interference(EMI) in railway applications is largely due to doing the power conversion for traction and Auxiliary system on the Highspeed Electric Multiple Unit-400X(HEMU-400X). In order to research on EMI in railway applications, it were included how much the HEMU-400X generates it and it has an effect on the equipments of electric system which resulted from Power Line Disturbance (PLD) phenomenon by the loss of contact during its running. In this study, the dynamic characteristic of a contact wire and pantograph suppling electrical power to high-speed trains are investigated. The analysis of the loss of contact based on Power Simulator program software is performed to develop power line disturbance model suitable for high speed operation. It is confirmed that a contact wire and pantograph model are necessary for studying the dynamic behavior of the pantograph system.