• International Journal of Oral Biology
• /
• 제35권4호
• /
• pp.137-144
• /
• 2010

To evaluate the biohazard properties of an extremely low frequency electromagnetic field (ELF-EMF), we explored the physical properties of the ELF-EMF that generates the electric current induction in the secondary coil from the chamber of a primary solenoid coil. We subsequently explored the biological effects of a strong alternating electromagnetic field (EMF), ranging from 730-960 Gauss, on the mouse testis. Mice were exposed to an alternating EMF field induced by a rectangular electric current at 1, 7, 20, 40, and 80 Hertz, for 1, 3, 5, and 7 hours. The mouse testes were examined for proliferative activity and apoptosis using the in situ terminal deoxynucleotidyl transferase (TdT) method and by immunostaining of proliferating cell nuclear antigen (PCNA), respectively. We found that the electric currentm induction increased in the 6-8 Hertz range, and that exposure to an ELF-EMF induced the apoptosis of mouse spermatocytes. In situ TdT staining was found to be most prominent in 7 Hertz group, and gradually reduced in the 20, 40, and 80 Hertz groups. These data suggest that a strong EMF can induce reproductive cell death within a short time, and the harmful effects of the EMF are maximal at low frequency alternating EMFs.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.754-755
• /
• 2008

This paper presents a method for reducing the Total Harmonic Distortion(THD) of line-line back_EMF of the IPMSM with distributed winding under the no-load condition. Firstly, the specific harmonic components of line-line back EMF are reduced considering with winding factor. Secondly, THD of line-line back EMF is minimized according to change of pole angle using by Space harmonic Analysis. Finally, the optimal design for minimizing the THD is conducted using response surface methodology with finite element analysis. The validity of the design method dealt with in this paper is demonstrated by comparison between the THD of optimal model and initial model.

• 대한안전경영과학회지
• /
• 제17권3호
• /
• pp.363-370
• /
• 2015

In this paper, the control technique of the stepping motor using back electromotive force(B-EMF) without encoder is investigated. The stepping motor generally uses the rotary encoder to detect the rotor position. Since this method increases the cost and the motor configuration size, the new closed-loop control method applied for the B-EMF was implemented by using current detect circuit, AD-converter, and micro controller unit(MCU). The control loop of stepping motor became very simplified. The current change of stepping motor measured by the amplifier was measured and analyzed, when the missing step is occurred. Based on the data from current feedback, position errors were compensated and confirmed by using AD-converter.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1997년도 한국재료학회 추계학술발표회
• /
• pp.32-32
• /
• 1997

• 한국안전학회지
• /
• 제23권4호
• /
• pp.36-41
• /
• 2008

This report describes the analytical solution of back EMF for BLDC motor using numerical analysis of air gap flux density. The analysis of air gap flux density is the key to expect the performance of back EMF for the design of brushless motor. The numerical analysis and FEM analysis are performed to vary attachment of stator side or rotor side, radial flux magnetization or parallel flux magnetization, magnet arc angle in the condition of constant air gap. This results have more reliable data comparing with test result of the back EMF for 7 phase BLDC motor.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 추계학술대회 논문집
• /
• pp.7-10
• /
• 2007

The current model based sensorless method has many benefits that it can be robust control for large load torque. However, this method should determine a coefficient of back electro motive force(back-emf). This coefficient is varied by load torque and speed. Also, the coefficient determining equation is not exist, so it is determined only by experiment. On the other hands, using only back-emf estimatior method can not drive in low speed area and it has weakness in load variation. For these problems, this paper suggests the hybrid sensorless method that mixes the back-emf estimator regarding saliency and the current based sensorless model. This estimator offers not only non-necessary coefficient for current sensorless model, but also wide speed area operating in no specific transition method.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제2B권4호
• /
• pp.162-167
• /
• 2002

This paper presents the dynamic analysis method for a slotless permanent magnet linear synchronous motor (PMLSM) using the 3-D space harmonic method. Instantaneous emf and thrust are considered by movement of the PM and instantaneous armature current instead of $K_E$ (back-emf constant) and $K_F$(thrust force constant) for accurate results. The results of magnetic field distribution, back-emf, inductance, and thrust are in agreement with 2-D FEM and experimental results. To confirm the validity of this method, the calculated results are compared to measured ones.

• 분석과학
• /
• 제10권4호
• /
• pp.300-306
• /
• 1997

직류전압강하법을 이용한 균열길이 측정방법은 입출력 도선의 위치 및 보정방법에 큰 영향을 받는다. 본 실험에서는 CT 시편을 실제 시편보다 9배 크기로 제작하여, 입출력 도선의 위치, 열 유도 EMF 및 기준전압의 위치가 기존의 보정곡선에 미치는 영향을 연구하였다. 연구 결과 입력전류 도선의 위치가 하중선에 위치할 때, Hicks-Pickard 관계식이 매우 정확하게 a/W와 V/Vo간의 관계를 나타내었으며, 이 때 Vo값을 a/W=0.241에서 측정 또는 계산된 값을 사용하고, 열유도 EMF를 보정함으로써 더욱 정확성을 향상시킬 수 있음을 알았다. 또한 입력도선이 하중선에 위치할 때 기준전압을 CT 시편에서 일반적으로 사용되는 위치인 시편 끝 하단에서 측정할 경우, 기준전압으로 보정한 전압값은 매우 큰 오차를 나타내었다.

• 전력전자학회논문지
• /
• 제8권1호
• /
• pp.56-63
• /
• 2003

본 연구에서는 감쇠상 역기전력을 고려한 토크모델이 도통 및 전환구간에서 다름을 보였으며 이를 통해 전환구간에서 나타나는 토크맥동을 수학적으로 해석하였다. 본 논문에서는 전환시간에 의해 나타나는 토크맥동을 저감할 수 있는 새로운 방식을 제안하였다. 첫째, 전환시간을 조절하여 상승상 및 감쇠상의 전류의 기울기를 일정하게 조정하는 절환지연시간제어를 제안하였다. 이를 통하여 비전환상에서의 전류맥동을 저감하였으며 직류단전압과 4배의 역기전력전압의 크기가 같아지는 임계속도 이하에서 토크맥동을 저감할 수 있다. 그러나, 역기전력 및 전환하는 전류의 관계에 의해 토크맥동이 여전히 존재한다. 특히 임계속도 이상에서는 토크맥동율이 크게 증가한다. 둘째, 역기전력과 전류의 관계에 따라 나타나는 토크맥동을 고려한 전환시점제어를 제안하였다. 제안한 방식에 의하여 BLDC 전동기의 토크맥동을 임계속도 이상에서 뿐 만 아니라 전 속도영역에서도 최소화 할 수 있다.

• Journal of Power Electronics
• /
• 제16권1호
• /
• pp.1-8
• /
• 2016

Dead time is typically incorporated in voltage source inverter systems to prevent short circuit cases. However, dead time causes an error between the output voltage and reference voltage. Hence, voltage equation-based algorithms, such as motor parameter estimation and back electromotive force (EMF)-based sensorless algorithms, are prone to estimation errors. Several dead-time compensation methods have been developed to reduce output voltage errors. However, voltage errors are still common in zero current crossing areas, and an effect of the error is much worse in a low speed region. Therefore, employing voltage equation-based algorithms in low speed regions is difficult. This study analyzes the conventional dead-time compensation method and output voltage errors in low speed operation areas. A current shaping method that can reduce output voltage errors is also proposed. Experimental results prove that the proposed method reduces voltage errors and improves the accuracy of the parameter estimation method and the performance of the back EMF-based sensorless algorithm.