• 한국정보통신설비학회:학술대회논문집
• /
• 2009.08a
• /
• pp.281-284
• /
• 2009

In this paper, we propose a method that applies Adaptive Frequency Sampling(AFS) technique to the equivalent circuit model for RF passive components. Thes days wireless communication system is getting smaller and smaller. So EMI/EMC is an issue in RF. We can solve PI(Power Integrity)/SI(Signal Integrity) that one of EMI/EMC problem apply IFFT for 3D EM simulation multiple with input signal. That is time comuming task. Therefore equivalent circuit model using RF passive component is important. AFS schemes are implemented to obtain the rational functions. S parameters of the equivalent circuit moldel is compared to those of EM simulation in case of the microstrip line structure.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.454-456
• /
• 2005

This paper is a study on the application of the most suitable wireless communication system in nuclear plant. Chapter. 1 is the point at issue because of using of only wire communications and present states of wireless communications in nuclear plant of the world. Chapter. 2 is guides of wireless communications in nuclear plant, a case of EMI/RFI, EMC measuring and review of the best wireless communication in nuclear plant in Korea. Chapter. 3 is advantages and good reasons on the using of wireless LAN in nuclear plant.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.65 no.1
• /
• pp.13-17
• /
• 2016

EMC (Electro Magnetic Compatibility) of the electrical railway must be ensured for safety of passenger. Maglev trains has not friction between the wheels and the rails because levitation by an permanent magnets, electromagnets and superconducting magnets etc. So, it is advantageous to maintain a high speed without noise and vibrations. In this paper, we investigated that the magnetic field of the before and after installation electromagnetic waves absorber in order to analyze the effects of electromagnetic waves. The theoretical analysis of the electromagnetic wave absorber was simulated using finite element method. The magnetic field properties of electromagnetic waves absorber were measured by EMI (Electro Magnetic Interference) test receiver.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.5
• /
• pp.821-826
• /
• 2008

Recently as a progress of electric technology, modern electric systems become more and more complicated. Thus, it is difficult to use a classical method to analyze responses of the systems in complicated electromagnetic environments because there are so many coupling phenomena. The electromagnetic topology (EMT) is a helpful solution to analyze electromagnetic interference / electromagnetic compatibility (EMI/EMC) of the large complex system. In this paper, EMT is applied to analyze an active element. And then to prove the validity of this analysis, a detector circuit including Schottky barrier diode is analyzed by EMT when input power is given directly.

• 한국정보통신설비학회:학술대회논문집
• /
• 2006.08a
• /
• pp.170-174
• /
• 2006

In this paper electromagnetic topology (EMT) is used to analyze the lumped components on printed circuit boards (PCBs). It is difficult to obtain desirable results about the electromagnetic coupling problems by using a numerical or an experimental method on complex systems. The EMT can be considered as a helpful method to the analysis of electromagnetic interference / electromagnetic compatibility (EMI/EMC) problems in the complex system. To verify the validity of this method, three types of the PCBs mounting a simple circuit are fabricated and experimented.

• Journal of the Korean Institute of Navigation
• /
• v.20 no.3
• /
• pp.107-115
• /
• 1996

With the rapid advance of electronic equipments and the frequent, use of them, the electromagnetic environments including EMC or EMI problems are very complicated. The radiation of electromagnetic waves from electronic equipments has strictly been controlled by the authorities concerned from many years ago. Though it is the most proper to test EMI or EMC in the open area test site, we have used the anechoic chamber in place of the test site because of its various restrictions. To achieve the purpose, in this paper, the performances of a few anechoic chambers according to absorbing materials are analyzed for horizontal and vertical polarizations respectively. Furthermore, the calculated and the measured site attenuations in semi-anechoic chamber made with ferrite grid are compared. The obtained results are to be valuable for designing an anechoic chamber.

• Journal of Magnetics
• /
• v.13 no.4
• /
• pp.173-176
• /
• 2008

In this study, a new kind of instrument for measuring the magnetic shielding effectiveness (MSE) was developed using a double yoke; one a magnetizing yoke and the other a sensing yoke. Using the developed instrument, the MSE could be measured for a steel sheet specimen in the ELF range, where the magnetic permeability contributes to the MSE at low frequencies and eddy currents contributes to the MSE high frequencies with < 0.1 dB reproducibility. The developed measuring method can be applied to quality control in a steel sheet company producing EMI/EMC shielding materials.

• Journal of Aerospace System Engineering
• /
• v.7 no.2
• /
• pp.47-54
• /
• 2013

This paper describes and analyzes the HIRF protection standards of the helicopter category focused on external RF environments. In addition, this paper presents an ideal process of airplane design to accomplish the successful certification. Furthermore, this paper proposes practical recommendations to reduce RF energy on aircraft using specific EMI/EMC techniques such as shielding, grounding and filtering methods. Most of the proposed methods in this paper were key issues during the certification process of KC-100 small airplane which is Korea's first trial aircraft for civil airplane certification.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.30-31
• /
• 2017

본 논문은 인터리브드 준공진 플라이백 컨버터에 추가회로 없이 적용된 최적의 밸리 스위칭 기법을 제안한다. 인터리브드 준공진 플라이백 컨버터는 스위치 양단 전압(Drain-Source voltage)$V_{DS}$이 최소화 되는 지점에서 스위치 턴 온이 되어 전체 시스템의 효율이 향상되고, EMI (Electro Magnetic Interference)와 EMC (Electro Magnetic Compatibility)의 영향을 최소화시킬 수 있다. 제안한 기법은 MCU (Micro Controller Unit) 기반 소용량 컨버터에 간단한 수식을 이용하여 최적의 밸리 스위칭 기법을 가능하게 한다. 제안한 기법은 시스템의 가격과 부피 상승 없이 효율을 향상시키고, EMI와 EMC의 영향을 최소화시킨다. 제안하는 기법의 성능은 시뮬레이션을 통해 확인하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.4
• /
• pp.721-726
• /
• 2000

The remarkable progress of electronics and radio communications technology has made our life abundant. On the other hand, the countermeasure of EMC becomes more important socially according to the increased use of electromagnetic waves. It had been required that the absorbing ability of an electromagnetic wave absorber is mote than 20 dB, the bandwidth of which is required through 30 MHz to 1,000 MHB for satisfying the international standard about an anechoic chamber lot EMl/EMS measurement. From November of 1998, however, the CISPR11 has accepted the extended frequency band from 30 MHz to 18 GHz in the bandwidth of EMI measurement. In this paper, we proposed the cutting corn-shaped type satisfying the above requirements and carried out broadband design using the equivalent material constants method. Moreover, we have fabricated it and compared its characteristics with simulated one.