• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.566-572
• /
• 2021

A methodology for the identification and coordinates estimation of air cavities under urban ground or sandy soil using its natural poles and natural resonant frequencies is presented. The potential of this methodology was analyzed. Simulation models of PEC (Perfect Electric Conductor)s with various shapes and dimensions were developed using an EM (Electromagnetic) simulator. The Cauchy method was applied to the obtained EM scattering response of various objects from EM simulation models. The natural poles of objects corresponding to its instinct characterization were then extracted. Thus, a library of poles can be generated using their natural poles. The generated library of poles provided the possibility of identifying a target by comparing them with the computed natural poles from a target. The simulation models were made assuming that there is an air cavity under urban ground or sandy soil. The response of the desired target was extracted from the electromagnetic wave scattering data from its simulation model. The coordinates of the target were estimated using the time delay of the impulse response (peak of the impulse response) in the time domain. The MP (Matrix Pencil) method was applied to extract the natural poles of a target. Finally, a 0.2-m-diameter spherical air cavity underground could be estimated by comparing both the pole library of the objects and the calculated natural poles and the natural resonant frequency of the target. The computed location (depth) of a target showed an accuracy of approximately 84 to 93%.

• Journal of Energy Engineering
• /
• v.24 no.1
• /
• pp.123-131
• /
• 2015

This paper aims to identify and clarify the cyber security risks and their interaction with the power system in Smart Grid. The EMS and other communication networks interact with the power system on a real time basis, so it is important to understand the interaction between two layers to protect the power system from potential cyber threats. In this study, the optimal power flow(OPF) and Power Flow Tracing are used to assess the interaction between the EMS and the power system. Through OPF and Power Flow Tracing based analysis, the physical and economic impacts from potential cyber threats are assessed, and thereby the quantitative risks are measured in a monetary unit.

• The Korean Journal of Applied Statistics
• /
• v.22 no.2
• /
• pp.365-373
• /
• 2009

Since 1990, identifying the sex of fetus and illegal abortion has brought the sex ratio imbalance at birth in Korea due to a notion of preferring a son to a daughter, socio-economic development, population policy, and so forth. Although there have been many researches such as time series analysis and region difference analysis to monitor this sex ratio imbalance, they have a defect that time and space could not be included in the analysis simultaneously. This study analyzes the sex ratio imbalance at birth, taking into account time and region at the same time. The analysis considered the numbers of male and female babies, who were born as the third or latter in their families, in 2000 and 2001 at 234 Gu / Si / Goon administrative districts. Here, we suggest a mixture model of binomial distributions, assuming heterogeneous populations. The estimation of the location parameters, weights and correlation coefficient of the mixture model is conducted by the EM algorithm, and the heterogeneity of the regions is expressed as a picture using ArcView GIS.

• The Korean Journal of Applied Statistics
• /
• v.22 no.4
• /
• pp.819-827
• /
• 2009

Kim et al. (2006) analyzed the donation data surveyed by Voluneteer 21 in year 2002 at South Korea using a Poisson regression based on the mixture of two Poissons and detected significant variables for affecting the number of donations. However, noting the large deviation between the predicted and the actual frequencies of zero, we developed in this note a Poisson regression model based on a distribution in which zero inflated Poisson was added to the mixture of two Poissons. Thus the population distribution is now a mixture of three Poissons in which one component is concentrated on zero mass. We used the EM algorithm for estimating the regression parameters and detected the same variables with Kim et al's for significantly affecting the response. However, we could estimate the proportion of the fixed zero group to be 0.201, which was the characteristic of this model. We also noted that among two significant variables, the income and the volunteer experience(yes, no), the second variable could be utilized as a strategric variable for promoting the donation.

• The Journal of Advanced Prosthodontics
• /
• v.7 no.5
• /
• pp.358-367
• /
• 2015

PURPOSE. The aim of this study was to evaluate the biaxial flexural strength (BFS) of one zirconia-based ceramic used with various veneering ceramics. MATERIALS AND METHODS. Zirconia core material (Katana) and five veneering ceramics (Cerabien ZR; CZR, Lava Ceram; LV, Cercon Ceram Kiss; CC, IPS e.max Ceram; EM and VITA VM9; VT) were selected. Using the powder/liquid layering technique, bilayered disk specimens (diameter: 12.50 mm, thickness: 1.50 mm) were prepared to follow ISO standard 6872:2008 into five groups according to veneering ceramics as follows; Katana zirconia veneering with CZR (K/CZR), Katana zirconia veneering with LV (K/LV), Katana zirconia veneering with CC (K/CC), Katana zirconia veneering with EM (K/EM) and Katana zirconia veneering with VT (K/VT). After 20,000 thermocycling, load tests were conducted using a universal testing machine (Instron). The BFS were calculated and analyzed with one-way ANOVA and Tukey HSD (${\alpha}$=0.05). The Weibull analysis was performed for reliability of strength. The mode of fracture and fractured surface were observed by SEM. RESULTS. It showed that K/CC had significantly the highest BFS, followed by K/LV. BFS of K/CZR, K/EM and K/VT were not significantly different from each other, but were significantly lower than the other two groups. Weibull distribution reported the same trend of reliability as the BFS results. CONCLUSION. From the result of this study, the BFS of the bilayered zirconia/veneer composite did not only depend on the Young's modulus value of the materials. Further studies regarding interfacial strength and sintering factors are necessary to achieve the optimal strength.

• Journal of Aquaculture
• /
• v.15 no.2
• /
• pp.103-110
• /
• 2002

Diets containing 0.02 to 10.0% EM-fermented orange (EFO) were fed to Paralichthys olivaceus(8.5 g), which were reared in flow-through system for 16 weeks. Groups fed on diets containing 0.1 and 0.2% EFO grew significantly faster; their feed coefficient and daily feeding rate were also higher. The number of goblet cells present in the mid-intestine of the fish receiving dietary EFO was significantly more. Total cholesterol level in plasma of the fish fed with 0.02% EFO was lower. However, there was no significant difference in GOT and GPT among the groups receiving different levels of EFO.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.8
• /
• pp.1595-1611
• /
• 1994

In this paper, the numerical wave propagation properties of the finite difference-time domain(FD-TD) method is investigated as a discrete model describing electromagnetic(EM) wave propagation phenomena. The leap-frog approximation of Maxwell's curl equations in time-space simulates EM wave propagation in terms of the numerical characteristic and the domain of dependence. A geometrical interpretation of the FD-TD numerical procedure is presented. The numerical dispersion error due to the leap-frog approximation and its dependence on the stability factor are illustrated. The FD-TD method using the leap-frog approximation is inherently a descriptive model. Thus, not only any physical picture about EM wave propagation phenomena can be drawn through this model, but also physical or engineering parameters in the frequency domain can be extracted from descriptive results. E-plane filter characteristics in the WR-28 rectangular waveguide and reflection property of an inductive iris in the WR-90 rectangluar waveguide extracted from simulation of the FD-TD model is included.

• Korean Journal of Organic Agriculture
• /
• v.18 no.1
• /
• pp.83-92
• /
• 2010

Organic farming is a type of agricultural practices based on naturally occurring processes excluding or strictly limiting the use of synthetic fertilizers, pesticides, and other chemicals. This study was conducted to investigate the influences of agro-based materials, effective microorganisms (EM), liquid silicate (LS), and organic liquid fertilizer (OLF) for water dropwort (Oenanthe stolonifera DC.) cultivation. Soil pH, soil organic matter, and plant available phosphorous decreased with LS application. Exchangeable Ca and Mg decreased with EM application, and electrical conductivity and exchangeable Ca and K decreased with OLF application. Most of essential nutrient contents in water dropwort were reduced with the treatments of LS, EM, and OLF as compared with those in control plot, except nitrogen and phosphorus. However, diseases and insect pests were almost not observed in the water dropwort in the agro-based material application plots, except cluster caterpillar (Spodoptera litura). Productivity of water dropwort tended to be reduced: its higher productivity in the OLF and EM+LS plots and lower in the LS and control plots.

• Journal of Sasang Constitution and Immune Medicine
• /
• v.5 no.1
• /
• pp.67-85
• /
• 1993

The Purpose of this study was to evaluate the reliability and the validation of four scales of Questionnaire for Sasang Constitution Classification (QSCC), newly constructed through statistical item analysis and to examine their diagnostic discrimination power. QSCC was administered to 105 inpatient at Kyung-Hee Oriental Medicine Hospital and local oriental clinics and 136 undergraduated students. 2 weeks later, QSCC was readministered to 220 same subjects. Data were collected during about 2 months from february to Apr. 20, 1992. For the purposes of this study, the collected data were analyzed by internal consistancy, test-retest reliability, ANOVA, Pearson correlation and discrimination analysis of spss pc+ v3.0 program. The results were as follows: 1. The reliability of four scales of QSCC was relatively favorable. The internal consistancy and test-retest reliability of Tae-Yaung-In(太陽人) scale were respectively Cronbach's ${\alpha}=0.9$ and r=0.89. Those of So-Yaung-In(少陽人) scale were respectively ${\alpha}=0.81$ and r=0.93. Those of Tae-Em-In(太陰人) scale were respectively ${\alpha}=0.72$ and r=0.74. Those of So-Em-In(少陰人) scale were respectively ${\alpha}=0.81$ and r=0.93. 2. The diagnostic discrimination abilities(Hit-ratio=56%)of QSCC were found to have more about 20% improvement than propotional chance criteria(37%). Especially, Hit-ratios for So-Yaung-In(63%) and Tae-Em-In(60%) were more high than that for So-Em-In(48%) 3. For male subjects, the construct validity of QSCC was founded to be relatively favorable. But that of QSCC for females was poor.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.10
• /
• pp.917-925
• /
• 2016

Schmitt Trigger logic is a gate level design method to have hysteresis characteristics to improve noise immunity in digital circuits. Dynamic Threshold voltage MOS(DTMOS) Schmitt trigger circuits can improve noise immunity without adding additional transistors but by controlling substrate bias. The performance of DTMOS Schmitt trigger logic has not been verified yet in standard CMOS process through measurement. In this paper, DTMOS Schmitt trigger logic was implemented and verified using Magna $0.18{\mu}m$ MPW process. DTMOS Schmitt trigger buffer, inverter, NAND, NOR and simple digital logic circuits were made for our verification. Hysteresis characteristics, power consumption, and delay were measured and compared with common CMOS logic gates. EM Immunity enhancement was verified through Direct Power Injection(DPI) noise immunity test method. DTMOS Schmitt trigger logics fabricated using CMOS process showed a significantly improved EM Immunity in 10 M~1 GHz frequency range.