• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.33 no.6
• /
• pp.294-302
• /
• 2023

Ni-Mn-Zn ferrite, Ni_0.5-xMn_xZn_0.5Fe₂O₄ (0 ≤ x ≤ 0.5), was synthesized using the sol-gel method to investigate the crystal structure, microstructure, magnetic properties, high-frequency characteristics, and electromagnetic (EM) wave absorption characteristics as a function of Mn substitution. As the Mn content increased, a continuous decrease in saturation magnetization (M_S) was observed with little change in coercivity (H_C). Samples for each composition (x) exhibited strong EM wave absorption performance with first and second strong EM wave absorption regions satisfying minimum reflection loss, RL_min < -40 dB in the 1.5~2.5, 6~11 GHz range, respectively. The EM wave absorption in Ni-Mn-Zn ferrite depends on magnetic loss, and adjusting µ' and µ'' spectra by Mn substitution or H field allows control of the EM wave absorption frequency.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05b
• /
• pp.233-240
• /
• 1996

Analyses of the viscous and end effects on electromagnetic (EM) pumps of annular linear induction type for the sodium coolant circulation in Liquid Metal Fast Breeder Reactors have been carried out based on the MHD laminar flow analysis and the electromagnetic field theory. A one-dimensional MHD analysis for the liquid metal flowing through an annular channel has been performed on the basis of a simplified model of equivalent current sheets instead of three-phase currents in the discrete primary windings. The calculations show that the developed pressure difference resulted from electromagnetic and viscous forces in the liquid metal is expressed in terms of the slip, and that the viscous loss effects are negligible compared with electromagnetic driving forces except in the low-slip region where the pumps operate with very high flow velocities comparable with the synchronous velocity of the electromagnetic fields, which is not applicable to the practical EM pumps. A two-dimensional electromagnetic field analysis based on an equivalent current sheet model has found the vector potentials in closed form by means of the Fourier transform method. The resultant magnetic fields and driving forces exerted on the liquid metal reveal that the end effects due to finiteness of the pump length are formidable. In addition, a two-dimensional numerical analysis for vector potentials has been performed by the SOR iterative method on a realistic EM pump model with discretely-distributed currents in the primary windings. The numerical computations for the distributions of magnetic fields and developed pressure differences along the pump axial length also show considerable end effects at both inlet and outlet ends, especially at high flow velocities. Calculations of each magnetic force contribution indicate that the end effects are originated from the magnetic force caused by the induced current ( u x B ) generated by the liquid metal movement across the magnetic field rather than the one (E) produced by externally applied magnetic fields by three-phase winding currents. It is concluded that since the influences of the end effects in addition to viscous losses are extensive particularly in high-velocity operations of the EM pumps, it is necessary to find ways to suppress them, such as proper selection of the pump parameters and compensation of the end effects.

• Geophysics and Geophysical Exploration
• /
• v.27 no.3
• /
• pp.181-195
• /
• 2024

This tutorial explains that the static effect in the magnetotelluric (MT) survey is a physical phenomenon caused by charges accumulated on the boundaries of subsurface inhomogeneities. To facilitate understanding of the physical phenomenon, differences between static induction and charge accumulation on the boundary are explained and analyzed with help of schematic illustrations. Subsequently, from the electromagnetic (EM) integral equation formulation, it is clearly shown that the secondary electric field due to charges accumulated on the interface in the presence of the primary field appears as the static effect. Therefore, except in the cases of the layered earth or a two-dimensional earth with transverse magnetic (TM) mode excitation, the static effect always exists in MT responses and further, it is not 'static' but rather frequency dependent. Despite the fact that the static effect is a secondary electric field due to inhomogeneity, inevitable under-sampling in the frequency and spatial domains prevent the effect from being handled properly in numerical inversion. Therefore, considering the practical aspects of the MT survey, which cannot be a continuous measurement covering the entire survey area over a wide frequency band, a three-dimensional (3-D) inversion incorporating the static shift as a constraint with the Gaussian distribution is introduced. To enhance understanding of the integral equation EM modeling, the formulation of the 3-D integral equation and mathematical analyses of the Green tensor and scattering current are described in detail in the Appendix.

• Journal of electromagnetic engineering and science
• /
• v.16 no.3
• /
• pp.150-158
• /
• 2016

This paper reports on a study of LiNiZn-ferrite composite as a radiation absorbent material (RAM). The electromagnetic (EM) wave absorbers are composed of an EM wave absorbing material and a polymeric binder. The surface morphology, chemical composition, weight percent of the ferrite composite of the toroid sample, magnetic properties, and return loss are investigated using field emission scanning electron microscopy (FE-SEM), energy dispersive X-ray spectroscopy (EDX), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), vibrating sample magnetometer (VSM), and network analyzer. For preparing the absorbing sheet, chlorinated polyethylene (CPE) is used as a polymeric binder. The EM wave absorption properties of the prepared samples were studied at 4 - 8 GHz. We can confirm the effects of the thickness of the samples for absorption properties. An absorption bandwidth of more than a 10-dB return loss shifts toward a lower frequency range along with an increase in the thickness of the absorber.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.11
• /
• pp.1019-1025
• /
• 2004

The X-band 10${\times}$10 waveguide slot array antenna for SAR is designed, fabricated and measured. The array antenna is designed using the equivalent circuit model based on the field distribution of the dominant mode, TE$\sub$10/, and EM simulation. The method to decide optimum angle of the centered inclined slot(coupling slot) and the optimum of offset of the longitudinal slot(radiating slot) is provided. The designed antenna structure is EM simulated and fabricated. The measured return loss bandwidth is 180 MHz at 9.15 GHz , the side lobe level is below -25 dB, HPBW is about 9$^{\circ}$, and the gain is 25.5 dB. These results are similar to the simulation data.

• Journal of Digital Convergence
• /
• v.10 no.1
• /
• pp.271-276
• /
• 2012

As applications of electromagnetic waves increase, biological effects caused by the EM waves are worried about. Many studies about the biological effects are reported. However, there are only a few reports on protection against the EM waves. The protection should be considered for the researchers who use strong EM waves in their experiments. In this paper, a method of reducing SAR in a cylindrical human model by a shield plate is proposed for RF engineers exposed to strong electromagnetic waves. The shield plate modeled as an arc structure is shown effectively to protect the cylindrical human model from the exposed field.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.6
• /
• pp.1571-1578
• /
• 2013

With the emergence of high-integration array and large area panel process, the need to minimize the generation of particles in the field of semiconductor, LCD and OLED has grown. As an alternative to the conventional roller system, a contactless magnetic conveyor has been proposed to reduce the generation of particles. An EM-PM hybrid which is one of magnetic levitation types is already proposed for the conveyor system. One of problems pointed out with this approach is the vibration caused by the dynamic interaction between conveyor and rail. To reduce the vibration, the introduction of a secondary suspension system which aims to decouple the levitation electromagnet from the main body is proposed. The objective of this study is to develop a dynamic model for the magnetically levitated conveyor, and to investigate the effect of the introduced suspension system. An integrated model of levitation system and rail based on 3D multibody dynamic model is proposed. With the proposed model, the dynamic characteristics of maglev conveyor system are analyzed, and the effect of the secondary suspension and the stiffness and damping are investigated.

• Korean Journal of Soil Science and Fertilizer
• /
• v.36 no.2
• /
• pp.57-65
• /
• 2003

Mapping of salinity distribution in the reclaimed lands was attempted by using the electromagnetic inductance technique. Field study was conducted to monitor ground conductivity with an electromagnetic inductance, EM 38 (Geonics), and electrical conductivity of the saturated extract, ECe of the soils, at the Daeho reclaimed land. EM values of horizontal mode, EMh, and vertical mode, EMv, mode were recorded at the interval of $2m{\times}2m$ from the ground. Soil samples were taken through the profile down to 100cm for calibration. ECe of poor drained area of Daeho, were in the range of $19.50-91.50ds\;m^{-1}$, while ECe of well-drained area ranged from $1.10-34.40ds\;m^{-1}$. Multiple regression equations for the measured EMv, EMh, and ECe were highly significant. The EMh showed higher correlation with ECe than EMv. With the multiple equation, ECgM could be calculated. Correlation between ECe and ECgM was the highest ($r=0.753^{***}$), when EMI readings were taken on the ground. The relationships were highly significant below 30 cm height of measurement, With the EM38 measurement, the salinity distribution was effectively expressed for the experimental filed in Daeho reclaimed land.

• Korean Journal of Veterinary Service
• /
• v.16 no.1
• /
• pp.70-75
• /
• 1993

To determine the prevalence of bovine rotavirus Infection in Chungbuk area, fecal specimen were collected from calves nth diarrhea and tested using ELISA. The positive rates were 53.8%(1 to 30days old), 19.0%(31 to 60days old), and 3.2%(over 60days old). Electrophoretic migration patterns of genomic RNA from field isolates were similar to that of NCDV strain, prototype of bovine rotavirus. Bovine rotavirus field isolate showed characteristic morphology of rotavirus particle with 80nm in diameter, using EM.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.12
• /
• pp.1180-1183
• /
• 2011

In this paper, we present a design of AEM radome with frequency selective surface using unit-cell EM simulation method and verified the performance of AEM radome by the radiation pattern measurements of $16{\times}16$ array-antenna. Measured results under near-field condition showed a good agreement with the simulation and far-field measured ones. And there were no radiation pattern variation between antenna only and antenna with AEM radome. From these results, we verified that AEM radome with frequency selective surface can be a solution to reduce the RCS of conventional mast and radar.