• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1359-1360
• /
• 2006

lTO(Indium-Tin-Oxide) was used as anode material for OLED. Characteristics of ITO have great effect on efficiency of OLEDS(Organic light emitting diodes). ITO surface was treated by Nd:YAG laser in order to improve its chemical properties, wettability, adhesive property and to remove the surface contaminants while maintaining its original function. In this study, main purpose was to improve the efficiency of OLEDs by the ITO surface treatment: ITO surface was treated using a Nd:YAG(${\lambda}=266nm$, pulse) with a fixed power of 0.06[w] and various stage scanning velocities. Surface morphology of the ITO was investigated by AFM. Test OLEDs with surface treated ITO were fabricated by deposition of TPD (HTL), Ald3 (ETL/TML) and Al (cathode) thin films. Device performance of the OLEDs such as V-I-L was investigated using Source Measurement Unit (SMU: Keithly. Model 2400) and Luminance Measurement (TOPCON. BM-8).

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.447-450
• /
• 2003

In this paper, new luminescent material, 6,11-dihydoxy-5,12-naphtacene-dione Alq3 complex (Alq2-Ncd), 1,4-dihydoxy-5,8-naphtaquinone Alq3 complex(Alq2-Nq) was synthesized. And extended efforts had been made to obtain high-performance electroluminescent(EL) devices, since the first report of organic light-emitting diodes(OLEDS) based on tris-(8-hydroxyquinoline) aluminum(Alq3). We have performed investigate characterization of the materials. Current-voltage characteristics, luminance-voltage characteristics and luminous efficiency were measured by Flat Panel Display Analysis System(Model 200-AT) at room temperature. An intensive research is going on to improve the device efficiency using the hole injection layer, different electrodes, and etc. By using the hole injection layer, the charge-injection can be controlled and the stability could be improved. This study indicates not only the sterical effect but also some other effects would be responsible for the change of the emission wavelength.

• Journal of Photoscience
• /
• 제11권3호
• /
• pp.121-127
• /
• 2004

The${\beta}$-glucosidases occur widely in all living organisms and has in general a tendency to form oligomers of varying numbers of subunits or aggregates, although the functional implications of such diverse oligomerization schemes remain unclear. In particular, the assembly mode of the oat ${\beta}$-glucosidase is very unique in that it multimerizes by linear stacking of a hexameric building block to form long fibrillar multimers. Some structural proteins such as actin and tubulin assemble into long fibrils in a helical fashion and several enzymes such as GroEL and Pyrodictium ATPase functional complexes, 20S proteasome of the archaebacterium Thermoplasma acidophilum, and lutamine synthetase fromblue-green algae, assemble into discrete oligomers upto 4 stacked rings to maintain their enzymatic activities. In particular, oat ${\beta}$-glucosidase exists in vivo as a discrete long fibrillar multimer assembly that is a novel structure for enzyme protein. It is assembled by linear stacking of hollow trimeric units. The fibril has a long central tunnel connecting to the outer medium via regularly distributed side fenestrations. The enzyme active sites are located within the central tunnel and multimerization increases enzyme affinity to the substrates and catalytic efficiency of the enzyme. Although it is suggested that oligomerization may contribute to the enzyme stability and catalytic efficiency of ${\beta}$-glycosidases, the functional implications of such diverse oligomerization schemes remain unclear so far.

• Structural Engineering and Mechanics
• /
• 제77권5호
• /
• pp.673-689
• /
• 2021

This paper addresses the efficiency of thermal insulation layers applied to protect structural elements strengthened by fiber-reinforced polymers (FRP) in the case of fire event. The paper presents numerical modeling and nonlinear analysis of reinforced concrete (RC) columns externally strengthened by FRP and protected by thermal insulation layers when subjected to elevated temperature specified by standard fire tests, in order to predict their residual capacity and fire endurance. The adopted numerical approach uses commercial software includes heat transfer, variation of thermal and mechanical properties of concrete, steel reinforcement, FRP and insulation material with elevated temperature. The numerical results show good agreement with published results of full-scale fire tests. A parametric study was conducted to investigate the influence of several variables on the structural response and residual capacity of insulated FRP-confined columns loaded by service loads when exposed to fire. The residual capacity of FRP-confined RC column was affected by concrete grade and insulation material and was shown to improve substantially by increasing the concrete cover and insulation layer thickness. By increasing the VG insulation layer thickness 15, 32, 44, 57 mm, the loss in column capacity after 5 hours of fire was 30%, 13%, 7% and 5%, respectively. The obtained results demonstrate the validity of the presented approach for estimation of fire endurance and residual strength, as an alternative for fire testing, and for design of fire protection layers for FRP-confined RC columns.

• Current Photovoltaic Research
• /
• 제10권4호
• /
• pp.111-115
• /
• 2022

For the high efficiency of the photovoltaic module, a high-output solar cell, which is the basis of photovoltaic power generation, is required. As the light receiving area of the solar cell increases, the light receiving area of the photovoltaic module also increases. Accordingly, recent trend is to use large-area solar cells such as M6 and M8 instead of M2-based solar cells for manufacturing the photovoltaic module and a study on the mechanical stiffness of the module with increased size is required. In this study, a mechanical load test corresponding to IEC-61215 was performed among the reliability tests of large-area photovoltaic modules. In order to confirm the degree to which the mechanical load test affects the photovoltaic module, the output and EL images were checked by sequentially increasing the pressure by 600 Pa at a pressure of 2400 Pa. Also, factors such as output and efficiency of large-area photovoltaic modules were verified through mechanical load testing of actual large-area photovoltaic modules and the rate of change was very small at 1%.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제10권3호
• /
• pp.213-224
• /
• 2010

An optically controlled silicon MESFET (OPFET) was fabricated by diffusion process to enhance the quantum efficiency, which is the most important optoelectronic device performance usually affected by ion implantation process due to large number of process induced defects. The desired impurity distribution profile and the junction depth were obtained solely with diffusion, and etching processes monitored by atomic force microscope, spreading resistance profiling and C-V measurements. With this approach fabrication induced defects are reduced, leading to significantly improved performance. The fabricated OPFET devices showed proper I-V characteristics with desired pinch-off voltage and threshold voltage for normally-on devices. The peak photoresponsivity was obtained at 620 nm wavelength and the extracted external quantum efficiency from the photoresponse plot was found to be approximately 87.9%. This result is evidence of enhancement of device quantum efficiency fabricated by the diffusion process. It also supports the fact that the diffusion process is an extremely suitable process for fabrication of high performance optoelectronic devices. The maximum gain of OPFET at optical modulated signal was obtained at the frequency of 1 MHz with rise time and fall time approximately of 480 nS. The extracted transconductance shows the possible potential of device speed performance improvements for shorter gate length. The results support the use of a diffusion process for fabrication of high performance optoelectronic devices.

• Asian-Australasian Journal of Animal Sciences
• /
• 제9권4호
• /
• pp.389-396
• /
• 1996

In the first of two experiments, liveweight gain responses and carcass characteristics were investigated using two breeds of growing male goats, local (Dhofari) and exotic (Cashmere), fed on a whole pelleted-high fiber date by-products' based diet at 32.5% level (As-fed) supplemented with 12% fish (sardine), (HF-Fish) and a commercial concentrate diet (conc.). The (HF-Fish) diet was formulated to be iso-nitrogenous to the (conc.) diet, supplying 14% CP (DM-basis). Both diets together with Rhodes grass hay (Chloris Guyana) were fed ad libitum. The experimental design was a complete random arranged in a $2{\times}2$ factorial with breeds and diets as the main factors, using six animals per treatment. The experiment lasted for 84 days and goats were penned individually. At the end of the feeding trial, three animals from each treatment group were slaughtered for carcass evaluation. In experiment 2, diets' digestibility and N-balance were determined using 3 sheep per diet. The (HF-Fish) diet significantly(p < 0.05) improved liveweight gain. There was also a significant difference(p < 0.01) between breeds, with Cashmere gaining more than local goats. Feed conversion efficiency, dressing percent and longissimus dorsi area were not significantly affected by diet or breed(p > 0.05). Digestibility of the proximate components and N-balance for both diets were similar and not significantly different(p > 0.05). Fish supplementation greatly improved the digestibility of CF, ADF, NDF, cellulose and hemicellulose. Meat production ost was decreased by 31% due to feeding of the (HF-Fish) diet.

• 한국전산구조공학회논문집
• /
• 제33권3호
• /
• pp.193-199
• /
• 2020

본 논문은 유한요소법과 유전알고리즘을 연동하여 지진하중을 받는 구조물의 강성저하(손상) 및 보강 후 효과를 추정하는 방법을 다루었다. 본 연구의 독창성은 지진하중을 적용하였고, 그 응답으로부터 구조물의 미지 변수를 추정한다는 점이다. 본 연구에서 제안한 방법은 지진하중으로부터 손상된 부위를 추정할 뿐 아니라, 그 위치와 정도를 규명할 수 있다. 제안한 방법을 검증하기 위하여 El Centro 및 포항 지진하중을 적용하여 저층 뼈대구조물와 트러스 교량을 대상으로 알고리즘을 실행하였다. 수치해석 예제는 제안한 방법이 수치해석적인 효율성 뿐 아니라 지진으로부터의 심각한 피해를 예방하는 데 적용할 수 있음을 보여주었다.

• 한국동물생명공학회지
• /
• 제35권2호
• /
• pp.119-141
• /
• 2020

The Dromedary camel (Camelus dromedaries) is an important species because of its ability to produce good quality meat, milk, and fibers under harsh environmental conditions. Camels are also crucial for transportation, racing, and as draft animals in agriculture. Therefore, dromedary camels play a critical role in the economy for millions of people living in the arid part of the world. The inherent capability of camels to produce meat and milk is highly correlated with their reproductive performance. Compared with other domestic species, the reproductive efficiency in camelids is low. Although recent reproductive technologies such as in vitro fertilization (IVF) and somatic cell nuclear transfer (SCNT) have been successfully applied to camelids and the birth of live offspring following these technologies has been reported; in vitro embryo production (IVP) has lagged in this species. The development of the IVP system for dromedary camels may be a useful tool for the genetic improvement of this species. IVP in farm animals includes three main steps; in vitro maturation (IVM) of an oocyte, IVF of a matured oocyte, and in vitro culture (IVC) of fertilized oocyte up to the blastocyst stage. This review aims to summarize various factors that influence oocyte quality, IVM, and in vitro embryo development in dromedary camel.

• Transactions on Electrical and Electronic Materials
• /
• 제16권5호
• /
• pp.268-273
• /
• 2015

While analyzing the specimens before and after the thermal shock test, we found that the power drop rate of the bare cell was 5.08%, while the power drop rate of the ribboned cell was 16.49%. In comparative terms, the efficiency was lower at the ribboned cell than at the bare cell. While analyzing through EL (Electroluminescence) shots and cross sections, we tried to decipher the exact cause of the power drop. Although mere color change of the cell was observed at the surface of the bare cell, no abnormality could be found inside the cell. On the surface of the ribboned cell, the short circuit of gridfinger extended from the front part of the front electrode of the ribboned cells. Therefore, cracks occurred on the surface of the cell. Cracks also appeared inside the cell. While analyzing the I-V curve, we determined an increase in the leakage current and an increase of resistances in series in the bare cell. In the ribboned cell, the resistances in parallel reduced remarkably. An increase of resistances in series could also be verified. Conclusively, we deduced that the power drop rate in the bare cell is a life span of the cell itself; aging is the cause of power drop rate in cells. In case of ribboned cell, the power drop rate was directly influenced by internal cracks and an intermetallic compound layer joining the ribbon at the front electrode.