• Journal of the Korean Applied Science and Technology
• /
• v.19 no.4
• /
• pp.297-301
• /
• 2002

We investigated the effect of electron injection layer on the performance of organic light emitting devices (OLEDs). As an electron injection layer, the quinolate metal complexes were used. We optimized the device efficiency by varying the thickness of the quinolate metal complexes layer. The device with 1 nm of the quinolate metal complexes layer showed significant enhancement of the device performance and device lifetime. We also compared the effect of 8-hydroxyquinolinolatolithium (Liq) with that of bis(8-quinolinolato)-zinc ($Znq_{2}$) and 8-hydroxyquinolinolatosodium (Naq) as an electron injection layer. As a result, Liq is considered as a better materials for the electron injection layer than $Znq_{2}$ and Naq.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.363-367
• /
• 2006

We synthesized new blue and bluish green emitting materials by using fully substituted ethylene moieties. Multi-layered EL devices were fabricated with synthesized materials and evaluated in terms of emission color and luminescence efficiency. BPBAPE[EML 4] having high $T_g$ of $155^{\circ}C$ showed luminance and power efficiency of 10.33cd/A and 4.0 lm/W without any doping agent. BTBPPA[EML 5] exhibited 5cd/A and 1.67lm/W efficiency with blue CIE value of (0.165, 0.195).

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1410-1412
• /
• 2005

We present that the electroluminescence (EL) efficiency can be improved by doping an electron transport layer (ETL) with organic materials which can make electron current increase. The electron transport layer of aluminum tris(8 -hydroxyquinoline) (Alq3) is doped with 2-(4-Biphenylyl)-5-(4-tertbutylphenyl)- 1,3,4-oxadiazole) (butyl-PBD) to enhance the electron mobility of the ETL. The higher quantum efficiency of device having ETL using Alq3 doped with butyl-PBD can be attributed to the improved electron and hole balance.

• Journal of Arbitration Studies
• /
• v.24 no.3
• /
• pp.125-169
• /
• 2014

In France, arbitration, both domestic and international, has recently been subjected to a major reform. This article discusses the content of the 2011 reform and its aftermath, while putting into perspective the current arbitration act in South Korea, an arbitration-friendly jurisdiction that contemplates reforming its own law. The two legal systems are characterized by their concern for efficiency and rationalization of the arbitration proceedings, through the codification of essential principles previously established by case law and through the promotion of the independence of this ADR vis-$\grave{a}$-vis state courts. The efficiency consideration is strengthened at every stage of the proceedings: from the arbitration agreement often considered valid and rarely challenged, through the proceedings for annulment, recognition and enforcement of the award, up to the judicial assistance of the French supporting judge towards the actual arbitral proceedings. Finally, new concerns are emerging: the increase of transparency and the arbitrability of disputes in some uncertain fields of law.

• International Journal of Reliability and Applications
• /
• v.7 no.2
• /
• pp.141-153
• /
• 2006

In this paper, we present the U-Statistic test for testing exponentiality against new renewal better than used (NRBU) based on a goodness of fit approach. Selected critical values are tabulated for sample sizes n=5(1)30(10)50. The asymptotic Pitman relative efficiency relative to (NRBU) test given in the work of Mahmoud et all (2003) is studied. The power estimates of this test for some commonly used life distributions in reliability are also calculated. Some of real examples are given to elucidate the use of the proposed test statistic in the reliability analysis. The problem in case of right censored data is also handled.

• Journal of the Semiconductor & Display Technology
• /
• v.7 no.1
• /
• pp.35-40
• /
• 2008

In OLED vacuum evaporation process, the essential requirements include good uniformity of the film thickness over a glass substrate. And, it is commercially significant to improve the consuming efficiency of material of the evaporant which is deposited on the substrate because of high price of organic materials. In this paper, to achieve the better thickness uniformity and the better organic material consuming rate, a process optimization algorithm was developed by understanding vacuum evaporation process parameters that affect the material consuming efficiency and the uniformity of film thickness. Based on the method developed in this study, the vacuum evaporation process of OLED was successfully controlled. The developed method allowed the manufacture of high quality OLED displays with cheaper fabrication cost.

• Nuclear Engineering and Technology
• /
• v.46 no.2
• /
• pp.217-224
• /
• 2014

The present work used the efficiency transfer method used to calculate the full energy peak efficiency (FEPE) curves of the (2"*2" & 3"*3") NaI (Tl) detectors based on the effective solid angle subtended between the source and the detector. The study covered the effect of the self attenuation coefficient of the source matrix (with a radius greater than the detector's radius) on the detector efficiency. $^{152}$ An Eu aqueous radioactive source covering the energy range from 121.78 keV up to 1408.01 keV was used. In this study an empirical formula was deduced to calculate the difference between the measured and the calculated efficiencies [without self attenuation] at low and high energy regions. A proper balance between the measured and calculated efficiencies [with self attenuation] was achieved with discrepancies less than 3%, while reaching 39% for calculating values [without self attenuation] due to working with large sources, or for low photon energies.

• 전자공학회논문지 IE
• /
• v.43 no.4
• /
• pp.1-7
• /
• 2006

In this paper, two types of blue organic light-emitting device were designed. We have analyzed the characteristics of Type I device without a hole blocking layer, and analyzed the characteristics of Type II device using a hole blocking layer of BCP or BAlq materials with 30 ${\AA}$ thickness. We obtained the ITO having the work function value of 5.02 eV using $N_2$ plasma treatment method with the plasma power 200 W. Type I device structure was ITO/2-TNATA/$\alpha$-NPD/DPVBi/$Alq_3$/LiF/Al:Li, and type II device structure was ITO/2-TNATA/$\alpha$-NPD/DPVBi/HBL/$Alq_3$/LiF/Al:Li. We have analyzed the characteristics of Type I and Type II device. The characteristics of the device were most efficiency on occasion of using a hole blocking layer of BAlq material with 30 ${\AA}$ thickness. Current density was 226.75 $mA/cm^2$, luminance was 10310 $cd/m^2$, Current efficiency was 4.55 cd/A, power efficiency was 1.43 lm/W at an applied voltage of 10V. The maximum EL wavelength of the fabricated blue organic light-emitting device was 456nm. The full-width at half-maximum (FWHM) for the EL spectra was 57nm. CIE color coordinates were x=0.1438 and y=0.1580, which was similar to NTSC deep-blue color with CIE color coordinates of x=0.14 and y=0.08.

• Journal of the Korean Chemical Society
• /
• v.52 no.3
• /
• pp.281-294
• /
• 2008

synergistic action caused by iodide ions on the corrosion inhibition of aluminium (Al) in 0.5 M HCl in the presence of Azadirachta Indica (AZI) plant extract has been investigated using potintiodynamic polarization and impedance techniques. It is found that AZI extract inhibits the corrosion of aluminium in 0.5 M HCl. The inhibition efficiency increases with the increase in AZI extract concentration, until 24% v/v of AZI extract, then Inh.% is decreased with father increase in AZI extract concentration. The adsorption of this extract in the studied concentration is found to obey Frewendlish adsorption isotherm. The addition of iodide ions enhances the inhibition efficiency to a considerable extent. The increase in Inh.% values in presence of fixed concentration of iodide ions indicates that AZI extract forms an insoluble complex at lower AZI extract concentrations by undergoing a joint adsorption. But at higher concentrations of AZI extract, competitive adsorption is found between iodide ions and the formed complex leading to less Inh.%.The Inh.% decreased in presence of iodide ions with AZI extract than in presence of AZI extract alone at all studied iodide concentrations. The synergism parameter Sq is defined and calculated from surface coverage values. This parameter in the case of AZI extract is found to be more than unity, indicating that the enhanced inhibition efficiency caused by the addition of iodide ions.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2001.08a
• /
• pp.157-158
• /
• 2001

We synthesized Bis(3-N-ethylcarbazolyl) terephthalidene(BECP) and Bis(3-N-ethylcarbazolyl) cyanoterephthalidene (BECCP) and characterized EL properties of these materials. Our device shows a strong blue emission at 472 nm with a luminance efficiency of 0.9 lm/Wat a voltage, a current density. and a brightness of 8 V, 5.7 $mA/cm^2$, and 130 $cd/m^2$, respectively.