• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.117-117
• /
• 2010

최근 10여년간 OLED는 급속한 기술발전으로 효율의 급속히 향상되어 100 lm 이상의 소자가 발표되고 있어, 디스플레이와 조명용 광원으로서의 응용 가능성이 증가하고 있다. 또한 에너지 및 환경의 중요성이 대두되며 효율은 점차 중요해 지고 있다. OLED의 효율 향상을 위해, 내부 양자효율이 25%인 형광 OLED를 대체할 수 있는, 인광 OLED가 대두되고 있다. 인광 OLED는 내부양자 효율이 형광 OLED에 비해 4배. 즉 100%의 내부양자 효율을 갖는다. 그러나 주로 사용되는 청색인광 물질인 FIrpic, Fir6 등의 수명이 짧다는 점과 색 좌표의 y값이 0.20 이상으로 하늘색 계열의 색특성을 보이는 등 여러 단점이 있다. 현제 이러한 단점을 보완하고자 하는 여러 연구가 진행되고 있다. 이에 본 연구에서는 다양한 호스트 물질을 사용, 도펀트 물질인 FIrpic을 도핑하여 청색인광의 효율을 높이고 수명을 증진시키고자 한다. 양극전극으로 RF 플라즈마 처리한 ITO를 사용하였으며, 진공증착방법을 사용하여 정공 주입층(HIL)으로 2-TNATA와 정공 수송층(HTL)으로 a-NPD을 증착하였으며, 전자 수송층(ETL)으로 Balq, 전자주입층(EIL)으로 LiF와 음극전극으로 Al을 증착하였다. 발광층(EML)에 사용되는 호스트 물질은 mCP, TCTA, CBP 등으로 다양화 하여 도펀트 물질인 FIrpic을 각각의 호스트 물질에 8 wt%으로 도핑하여 OLED 소자를 제작하였고, 전기 및 광학적 특성을 평가하였다.

• Proceedings of the Korea Contents Association Conference
• /
• 2016.05a
• /
• pp.279-280
• /
• 2016

기업 내부 및 외부 환경 요인 분석을 통한 올바른 비즈니스 전략 수립은 기업의 최상의 결과 창출로 이어질 수 있다. 때문에 SWOT(Strength, Weakness, Opportunity, Threat) 분석을 통해 기업 내부의 강점요인과 약점요인을 인지하고, 기업 외부의 기회요인과 위협요인을 정확하게 분석하는 과정은 매우 중요하다. 그러나 많은 기업들이 그들의 상대적인 강점요인과 약점요인, 기회요인과 위협요인에 대해 정확하게 판단하지 못하는 경우가 많다. 본 연구는 기업이 환경분석 과정에서 보편적으로 활용하는 분석모델 중 하나인 SWOT 분석을 지원하는 도구를 설계 및 구현한 것으로, 각 분야의 전문가들이 작성한 SWOT 분석 결과를 바탕으로 SWOT 분석 사례 DB를 만들어 사용자가 데이터베이스에 저장되어있는 각각의 환경요소를 조회하여 기업에 적합한 환경요소들을 선택, 수정, 추가하게 함으로써 SWOT 분석 시에 기업들이 고려해야하는 내부 및 외부 환경 요인에 대한 정보를 제공하고자 한다. 이를 통해 기업들이 자신의 내부 역량에 대해 보다 정확하게 인지하고, 외부 환경 변화에 대한 고찰을 도울 수 있을 것으로 사료된다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.11 no.4
• /
• pp.295-301
• /
• 2011

A triple-band transceiver module for 2.3/2.5/3.5 GHz mobile WiMAX, IEEE 802.16e, applications is introduced. The suggested transceiver module consists of RFIC, reconfigurable/multi-resonance MIMO antenna, embedded PCB, mobile WiMAX base band, memory and channel selection front-end module. The RFIC is fabricated in $0.13{\mu}m$ RF CMOS process and has 3.5 dB noise figure(NF) of receiver and 1 dBm maximum power of transmitter with 68-pin QFN package, $8{\times}8\;mm^2$ area. The area reduction of transceiver module is achieved by using embedded PCB which decreases area by 9% of the area of transceiver module with normal PCB. The developed triple-band mobile WiMAX transceiver module is tested by performing radio conformance test(RCT) and measuring carrier to interference plus noise ratio (CINR) and received signal strength indication (RSSI) in each 2.3/2.5/3.5 GHz frequency.

• Nuclear Engineering and Technology
• /
• v.31 no.5
• /
• pp.498-505
• /
• 1999

Trivalent actinide-lanthanide group separation is difficult to perform on an industrial scale, because of the many drawbacks of the available chemical process. In this paper, picolinamide(C$_{8}$H$_{17}$) is synthesized and characterized, and extraction yields of Am-241, Eu-152 and Nd are determined in batch extraction experiments. In particular, the influence of the solvent is described. The extraction yields of Am-241, Eu-152 and Nd depended on the LiNO$_3$ concentration, the picolinamide(C$_{8}$H$_{17}$) concentration and the acidity. A favorable picolinamide(C$_{8}$H$_{17}$) concentration was found to be about 2M. The appropriate nitric acid concentration and LiNO$_3$ concentration were confirmed to be about 0.125M and 3M, respectively. The separation factor of Am and Eu was about 9.9 at optimum conditions. The picolinamide(C$_{8}$H$_{17}$) is a very promising extractant for the actinide(III)-lanthanides(III) separation.aration.aration.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.37 no.3
• /
• pp.309-313
• /
• 2024

The key to determining the lifetime of OLED device is how much brightness can be maintained. It can be said that there are internal and external causes for the degradation of OLED devices. The most important cause of internal degradation is bonding and degradation in the excited state due to the electrochemical instability of organic materials. The structure of OLED modeled in this paper consists of a cathode layer, electron injection layer (EIL), electron transport layer (ETL), light emission layer, hole transport layer (HTL), hole injection layer (HIL), and anode layer on a glass substrate from top to bottom. It was confirmed that the temperature generated in OLED was distributed around the maximum of 343.15 K centered on the emission layer. It can be seen that the heat distribution generated in the presented OLED structure has an asymmetrically high temperature distribution toward the cathode, which is believed to be because the sizes of the cathode and positive electrode are asymmetric. Therefore, when designing OLED, it is believed that designing the structures of the cathode and anode electrodes as symmetrically as possible can ensure uniform heat distribution, maintain uniform luminance of OLED, and extend the lifetime. The thermal distribution of OLED was analyzed using the finite element method according to Comsol 5.2.

• Korean Chemical Engineering Research
• /
• v.45 no.2
• /
• pp.124-132
• /
• 2007

This work investigated a fabrication way of stable platinized Ti electrode and evaluated the electrochemical characteristics of the Sn-modified platinized Ti electrode in nitrate solution. A Pt electro-plating way to form some open special clearances within the Pt coating layer on etched Ti substrate was very important to remove effectively the residual contaminate due to plating solution out of the fabricated electrode surface and to maximize the actual electrode surface area contacting solution. Both boiling and electro-cleaning processes of the fabricated electrode was essential to obtain a stable platinized-Pt electrode with reproducible and stable surface property which was necessary for the correct evaluation of Sn coverage on the electrode. The electro-cleaning caused a morphology change of the platinized Ti electrode surface with some downy hair-like polyps formed during the deposition disappearing, which made the electrode stable. The Sn-modified platinized Ti electrode in this work showed the best electro-activity for nitrate reduction, when it was fabricated through the Pt electro-plating of about 30 minutes.

• Journal of Sensor Science and Technology
• /
• v.6 no.1
• /
• pp.1-5
• /
• 1997

Highly sensitive pyroelectric IR sensors were fabricated with La-modified $PbTiO_{3}(PLT)$ thin plates compensating for piezoelectric effect. The device was fabricated in a dual form by placing two PLT cells, each of $1{\times}2\;mm^{2}$, side by side with appropriate electrode configuration. The dual element sensor had a signal to noise ratio of about 350 that was much larger than that of single element sensors. Further the dual element sensors exhibited excellent pyroelectric properties such as a large voltage responsivity of 2400 V/W, a pyro-coefficient of $4.6{\times}10^{-8}\;C/cm^{2}K$, a voltage figure of merit of $4.2{\times}10^{-11}\;Ccm/J$, and a small thermal time constant of 8.7 msec. It was confirmed through experiments that the dual element sensor was applicable to detect the two-dimensional moving direction of human beings.

• Applied Chemistry for Engineering
• /
• v.4 no.4
• /
• pp.739-745
• /
• 1993

The characteristics of mass transfer in an inorganic ion exchange system where Cs and/or Sr are separated by means of zeolites was investigated. Experimental work to separate Cs or Sr was carried out for Cs-AW300 and CS-AW500 systems in case of Cs whereas for Sr-4A and Sr-13X systems in case of Sr. The experimental conditions were chosen as follows in the batch type separation : temperature $25^{\circ}C$, agitation speed 300rpm, amount of zeolite 4g, volume of solution $0.5{\ell}$, and concentrations of solution 1000ppm, 2000ppm, respectively. As a result, it was found that the mass transfer rate is controlled mainly by the liquid film diffusion. The mass transfer coefficients in the film were found to be in the range of $10^{-4}{\sim}10^{-3}cm/sec$, while the apparent diffusivity inside the particles was found to be in the order of $10^{-8}cm^2/sec$.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.8 s.99
• /
• pp.803-809
• /
• 2005

This paper presents a novel method of mutual coupling suppression between antenna elements for performance improvement in planar array antenna system. Two miniature patch antenna elements satisfied IEEE 802.1 la($5.75\~5.35\;GHz,\;5.75\~5.85\;GHz$) are used for this research, they are arrayed by half wave length interval. It is observed about -20 dB mutual coupling between each antenna element at center frequency. To suppress mutual coupling, the arrayed antennas with a reversed 'U' structure are observed below -30 dB mutual coupling at IEEE 802.1la band.

• The Journal of the Korea Contents Association
• /
• v.17 no.7
• /
• pp.1-11
• /
• 2017

The best business strategy leading to innovation and productivity can be achieved by carefully analyzing internal and external environments of a company. Many companies often require, but difficult to find a tool to determine their own internal/external environmental factors including strengths, weaknesses, opportunities and threats(SWOT). SWOT is one analytical base model that is utilized in this research to design semi-automated environmental analysis process. This study investigates on SWOT generation system that is built on existing analysis database created by experts in each field. Companies can search and choose their best expressing environmental elements that are stored in the database. This semi-automated SWOT tool is expected to contribute that companies can recognize their internal capabilities more accurately, and help consider external environment changes around them.