• Journal of the Korean Chemical Society
• /
• v.58 no.4
• /
• pp.359-365
• /
• 2014

The inhibition effect of cinnamon plant extract as a green corrosion inhibitor for steel in sulfide polluted salt water was studied by potentiodynamic polarization, electrochemical impedance spectroscopy (EIS), and electrochemical frequency modulation (EFM). The results showed that cinnamon plant extract in sulfide polluted salt water is a good corrosion inhibitor with inhibition efficiency reached to 80% at 250 ppm of the plant extract. The adsorption of cinnamon obeys Temkin adsorption isotherm, and acts as a mixed-type of inhibitor but dominantly as a cathodic inhibitor in sulfide polluted salt water.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.49 no.6
• /
• pp.380-386
• /
• 2000

This paper presents the mathematical modelling analysis of Brushless Synchronous Motor(BLSM). The dynamic and the steady state characteristics of BLSM are simulated and analyzed : electromagnetic torque, speed, line voltage, and current. We used mathematical modelling to model of BLSM with sinusoidal back EMF, namely the shaft transformation referencing rotor frame from a, b, c three to produce constant torque like synchronous motor. The experiment result has already similar to compare with simulation result : torque error about 7%, speed error about 5%. The validity of proposed modelling and analysis was confirmed by the experimental result.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.237-237
• /
• 2006

P(VDF/TrFE(72/28) ultrathin films were used in the fabrication of Metal-Ferroelectric polymer-Metal (MFM) single bit device with special emphasis on uniform film surface, faster dipole switching time under applied external field and longer memory retention time. AFM and FTIR-GIRAS were complementary in analyzing surface crystalline morphology and the resultant change in chain orientation with varying thermal history. DC-EFM technique was used to 'write-read-erase' the data on the memory bit in a much faster time than P-E studies. The results obtained from this study will enable us to have a good understanding of the ferroelectric and piezoelectric behavior of P(VDF/TrFE)(72/28) thin films suitable for high density data storage applications.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.300-301
• /
• 2000

DVD는 CD사이즈의 광디스크에 고화질기 MPEG2 디지털 압축동화를 두 시간이상 수록할 수 있는 기록 및 재생기기로써 최초의 규격서가 1996년 8월에 발행되었다. 650nm의 적색반도체레이저와 개구수 0.6의 대물렌즈를 채용한 광픽업으로 직경 12cm의 단면디스크에 CD-ROM의 약 7배인 4.7GB에서 17GB까지의 용량저장이 가능하다. 변조방식은, DC성분을 억제할 수 있고, 또한 DR(Density Ratio)이 큰 EFM-Plus 변조를 채용하고, 에러정정방식은 32kB를 하나의 블록으로 하는 Reed Solomon Product code이다. File system은, 음성, 화상데이터와 컴퓨터 데이터를 통합할 수 있도록 계층구조로 하고, ISO9669 파일시스템과 UDF파일시스템을 함께 사용하고 있다. (중략)

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.182-182
• /
• 2010

나노 소재의 물성을 측정하기 위하여 대부분의 연구 구룹에서는 크게 두 가지 분석 기법인 분광학을 이용한 분석과 나노트라이볼로지를 이용한 분석을 사용하고 있다. 분광학을 이용한 분석에는 NMR, IR, Raman, SEM, TEM 등이 대표적이라 할 수 있고, 나노트라이볼로지를 이용한 분석에는 AFM, EFM, KFM, Nano-indenter 등의 탐침을 이용한 측정 기법이 대표적이다. Nano-indenter는 물질의 탄성 및 경도를 측정 할 수 있으며 이를 통해 물질의 특성을 연구하는데에 사용된다. 그러나 이런 Nano-indenter의 압입 실험에서는 그 결과값이 압입 조건 등의 통제변수의 함수가 될 것이다. 이를 확인하고 변화값의 parameter를 추출하기 위하여 본 실험에서는 이런 압입 조건 중 Load - Hold - Unload force의 속도 및 시간을 변화시켜 물질의 탄성계수와 경도가 어떻게 변하는지에 대한 역학관계를 연구하였다.

• Journal of the Korean Chemical Society
• /
• v.58 no.1
• /
• pp.25-32
• /
• 2014

Corrosion inhibition of 304 stainless steel (SS) in 1 M HCl by aqueous extract of coriander seeds was studied using weight loss, potentiodynamic polarization, electrochemical impedance spectroscopy (EIS) and electrochemical frequency modulation (EFM) techniques. Values of inhibition efficiency obtained are dependent upon the concentration of extract and temperature. Generally, inhibition was found to increase with inhibitor concentration, but decrease with temperature. Physical adsorption mechanism has been proposed for the inhibition with Langmuir adsorption isotherm obeyed. Values of activation energy of the inhibited corrosion reaction of 304 SS are greater than the value obtained for the blank. Thermodynamic consideration reveals that adsorption of aqueous extract of coriander seeds 304 SS surface is spontaneous.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.04a
• /
• pp.427-429
• /
• 2004

최근 광대역 멀티미디어 서비스에 대한 관심이 HD(High Density)방송의 시작과 함께 고조되고 있다. WPEG(Moving Picture Experts Group) HD 방송 채널을 수용하기 위해서 요구되는 방송대역은 20Mbps로 현재 가입자 망으로 한계를 가지고 있다. 궁극적인 해결 방안으로 FTTH(Fiber To The Hone) 광 가입자망이 논의되고 있다. 광 가입자 망의 유력한 방법중의 하나가 Gigabit Ethernet PON으로 IEEE(Institute of Electrical and Electronics) 802.3 EFH(Ethernet First Mile) AH Group을 중심으로 표준화 진행 중에 있다. IEEE 802.3 EFM AH Group에서는 가입자 망 장애에 대한 Protection 링크 이중화가 고려되고 있지 않아 본 논문에서 Gigabit Ethernet PON에서 링크 이중화 방법을 제시 하고자 한다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.49-49
• /
• 2023

지구온난화의 영향으로 가뭄의 발생 빈도가 전 세계 곳곳으로 증가하고 있는 추세이다. 가뭄이란 강수량 혹은 가용 수자원 등이 평균적인 수준에 비해 지속해서 적게 유지되는 현상으로 다양한 분야(기상, 농업, 사회, 경제 등)에 피해를 발생시킨다. 가뭄이 지속되면 인간 사회 뿐만 아니라 동·식물이 서식하고 있는 생태계에도 영향을 미치게 된다. 우리나라에서도 2000년대 이후 주기적으로 발생한 가뭄으로 인해 가뭄 현상을 모니터링하고 예측, 전망하기 위한 다양한 연구가 진행되고 있으나 아직까지 환경생태가뭄에 대한 연구는 미흡한 실정이다. 본 연구에서는 가뭄으로 인해 환경생태계에 미치는 영향 중 수생태계에 초점을 맞춰 진행하였으며, 수생태계에 서식하는 동·식물 중 어류만을 대상으로 하였다. 생태가뭄을 빠르고 쉽게 예측하기 위해 Ecological Nomograph를 개발하여 가뭄에 따른 수생태계에 미치는 영향을 분석하고자 하였다. 본 연구에서 나온 결과를 바탕으로 환경가뭄을 감시하고 대응하기 위한 분석 방법으로 활용할 수 있을 것으로 판단된다.

• Journal of the Korean Vacuum Society
• /
• v.19 no.5
• /
• pp.360-364
• /
• 2010

Most research groups used two analysis methods (spectroscopy and nanotribology) to measure the mechanical properties of nano-materials: NMR (Nuclear Magnetic Resonance), IR (Infrared Spectroscopy), Raman Spectroscopy as the spectroscopy method and AFM (Atomic Force MicroScope), EFM (Electrostatic Force Microscope), KFM (Kelvin Force Microscope), Nanoindenter as the nanotribological one. Among these, the nano-indentation technique particularly has been recognized as a powerful method to measure the elastic modulus and the hardness. However, this technique are prone to considerable measurement errors with pressure conditions during measurement. In this paper, we measured the change of elastic modulus and hardness of an Al single crystal with the change of load, hold, and unload time, respectively. We found that elastic modulus and hardness significantly depend on load, hold, and unload time, etc. As the indent time was shortened, the elastic modulus value decreased while the hardness value increased. In addition, we found that elastic modulus value was more sensitive to indent load, hold, and unload time than the hardness value. We speculate that measurement errors of the elastic modulus and the hardness originate from the residual stress during indenting test. From our results, the elastic modulus was more susceptible to the residual stress than the hardness. Thus, we find that the residual stress should be controlled for the minimum measurement errors during the indenting test.

• Structural Engineering and Mechanics
• /
• v.46 no.2
• /
• pp.213-229
• /
• 2013

Although performance based assessment procedures are mainly developed for reinforced concrete and steel buildings, URM (Unreinforced Masonry) buildings occupy significant portion of buildings in earthquake prone areas of the world as well as in IRAN. Variability of material properties, non-engineered nature of the construction and difficulties in structural analysis of masonry walls make analysis of URM buildings challenging. Despite sophisticated finite element models satisfy the modeling requirements, extensive experimental data for definition of material behavior and high computational resources are needed. Recently, nonlinear equivalent frame models which are developed assigning lumped plastic hinges to isotropic and homogenous equivalent frame elements are used for nonlinear modeling of URM buildings. The equivalent frame models are not novel for the analysis of masonry structures, but the actual potentialities have not yet been completely studied, particularly for non-linear applications. In the present paper an effective tool for the non-linear static analysis of 2D masonry walls is presented. The work presented in this study is about performance assessment of unreinforced brick masonry buildings through nonlinear equivalent frame modeling technique. Reliability of the proposed models is tested with a reversed cyclic experiment conducted on a full scale, two-story URM building at the University of Pavia. The pushover curves were found to provide good agreement with the experimental backbone curves. Furthermore, the results of analysis show that EFM (Equivalent Frame Model) with Dolce RO (rigid offset zone) and shell element have good agreement with finite element software and experimental results.