• 한국수산과학회지
• /
• 제53권2호
• /
• pp.181-190
• /
• 2020

This study was conducted to estimate the optimum dietary DHA oil level and replacement level of enzyme treated fish meal (EFM) with sardine fish meal for juvenile Atlantic bluefin tuna Thunnus thynnus. Four diets were used: 1) EFM75 in which 75% EFM and 4% DHA oil were applied, 2) EFM60, with 60% EFM and 15% sardine fish meal, 3) DHA2 with 2% of DHA oil, and 4) SL as a raw fish feed. In a feeding trial, juvenile bluefin tuna (body weight 30.1 g) were randomly stocked into four experimental tanks (69 tones) and fed the experimental diets for 13 days. Fish weight gain was higher in the EFM75 and SL groups than in the DHA2 and EFM60 groups. The feed conversion ratio was lower in the EFM75 and DHA2 groups than in the EFM60 and SL groups. Survival was higher in fish fed the formulated diet groups (EFM75, EFM60 and DHA2) than in fish fed SL. This study clearly indicates that up to 10% dietary sardine fish meal can be used in juvenile T. thynnus diets, with an optimum dietary DHA oil level of approximately 3%.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2000년도 춘계학술대회 학술발표 논문집
• /
• pp.122-125
• /
• 2000

The paper describes the adaptation of evolutionary fuzzy model ins (EFM) in developing global function approximation tools for use in genetic algorithm based optimization of nonlinear structural systems. EFM is an optimization process to determine the fuzzy membership parameters for constructing global approximation model in a case where the training data are not sufficiently provided or uncertain information is included in design process. The paper presents the performance of EFM in terms of numbers of fuzzy rules and training data, and then explores the EFM based sizing of automotive component for passenger protection.

• 한국수산과학회지
• /
• 제53권3호
• /
• pp.423-431
• /
• 2020

This study was conducted to investigate in vivo and in vitro digestibility in juvenile Atlantic Bluefin tuna Thunnus thynnus. In vivo digestibility was compared between four experimental diets to determine the optimum dietary inclusion level of an enzyme-treated sardine fish meal (EFM) and sardine fish meal (FM). The experimental diets were as follows; EFM75 (75% EFM), EFM60 (60% EFM and 15% FM), FM75 (75% FM) and SL (frozen sand lance) as a raw fish feed. Feces of Bluefin tuna (90.3 g) were collected both by siphoning from a 700 L cage and by dissection in 69 ton concrete rearing tanks. For the siphoning method, protein digestibility was higher in the tuna fed SL diet than that of other groups. The lowest protein digestibility was observed in FM75. For the dissection method, protein digestibility was higher in tuna fed EFM75 diet than that of other groups. The lowest protein digestibility was observed in the EFM60 group. In vitro digestibility was compared in six protein sources to find an alternative source of EFM for the tuna feed. The highest in vitro digestibility was observed in EFM (92%) followed by low temperature FM (72%), meat meal (65%), feather meal (60%), sardine fish meal (57%) and poultry by-product meal (55%).

• 한국산학기술학회논문지
• /
• 제6권1호
• /
• pp.12-16
• /
• 2005

EFM(electrostatic force microscopy)을 이용하여 탄소나노튜브를 측정하였다. EFM 위상 이미지론 얻었을 때, 위상차(${\Delta}{\phi}^{-l/2}$)와 탄소나노튜브 길이(L)의 역수는 선형관계를 보였다. 또한 위상차는 캔틸레버 팁과 탄소나노튜브 사이의 거리(h)의 제곱에 반비례하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.369-372
• /
• 2006

Flat plate slab systems have been commonly used as a gravity force resisting systems, which should be constructed with lateral force resisting systems such as shear walls and moment resisting frame. ACI 318(2005) allows the Direct design method, the equivalent frame method (ACI-EFM) under gravity loads and the finite-element models, effective beam width models and equivalent frame models under lateral loads. ACI-EFM can be used for gravity loads as well as lateral loads analysis. But the method may not predict the behavior of flat plate slabs under lateral loads. Thus Previous study developed a Modified equivalent frame method(Modified-EFM) which could give more precise answer for flat plate slab under lateral loads. This study is to verified the accuracy of a Modified-EFM under combined lateral and gravity loads. The accuracy of this model is verified by comparing the results using the Modified-EFM with the results of finite element analysis. For this purpose, 7 story building is considered. The analysis results of other existing models are included. The analysis results show that Modified-EFM produces comparable drift and slab internal moments with those obtained from finite element analysis.

• 한국유기농업학회지
• /
• 제31권4호
• /
• pp.381-394
• /
• 2023

This study was conducted to monitor the antibiotics resistance of human-harmful bacteria isolated in the agricultural environment for hot peppers (Capsicum annuum) and tomato (Lycopersicon esculentum). As a result, we isolated 120 bacterial species (34 on fruits, 48 in soil, 21 in water, and 17 in manure), identified them with the 16S rRNA sequence, analyzed minimum inhibitory concentration (MIC) for 26 antibiotics using Sensititre ARIS Hi-Q system and then evaluated whether each bacterial genus acquired resistance for the tested antibiotics or not, according to the CLSI criteria. From difference in MIC between eco-friendly (EFM) and practical (PFM) cultivation farms, Klebsiella spp. isolated from EFM was resistant to ampicillin (AMP) and nalidixic acid (NAL), and that isolated from PFM was resistant to streptomycin (STR) and tetracycline (TET). Enterobacter spp. isolated from EFM was resistant to AMP and azithromycin (AZI), and that isolated from PFM was resistant to AMP, AZI, and STR. Meanwhile, Pseudomonas spp. isolated from EFM and PFM were all resistant to AMP, AZI, cefotaxime (FOT), cefoxitin (FOX), ceftriaxone (AXO), CHL, NAL, and STR. Staphylococcus spp. isolated from EFM and PFM were resistant to gentamycin (GEN), STR, and kanamycin (KAN), and in particular, that from EFM showed resistance for erythromycin (ERY). In conclusion, our study suggested that EFM lead STR antibiotics resistance for human-harmful bacteria to decrease, because only the bacteria isolated from hot pepper and tomato crop with PFM have showed resistance against STR antibiotics, regardless of bacterial genus.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 1999년도 춘계연구발표회 논문개요집
• /
• pp.114-115
• /
• 1999

• 사물인터넷융복합논문지
• /
• 제6권3호
• /
• pp.59-65
• /
• 2020

일상에서 이용하는 모든 물건들이 네트워크 접속 기능을 갖추고, 이들이 긴밀하게 연동하면서 생활 및 업무의 편의성을 높이는 IoT(사물인터넷) 시대가 활짝 열렸다. 로봇도 IoT 환경에 맞춰 발전해야 하는 상황이다. 논문에서는 IoT 환경을 위한 다리가 있는 로봇 궤적을 생성하기 위해 새로운 형태의 EFM (진화 퍼지 머신)을 사용하는 방법에 대하여 다룬다. 퍼지 시스템은 비선형 시스템을 묘사하는 데 널리 사용되고 있다. 퍼지 시스템에서 퍼지 모델의 전반부 및 후반부 구조를 결정하는 것은 매우 중요한 문제이다. EFM은 다리가 달린 로봇을 위해 퍼지 시스템의 전반부 및 후반부 구조를 진화시켜 효율적으로 구조를 개선한다. 퍼지 시스템에서 각 구조의 로봇 궤적 매개 변수를 생성하고 EFM에 의해 자동으로 조정된다. 제안된 접근 방식은 다리가 있는 로봇에 적용하여 성능을 살펴본다.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2003년도 추계 학술발표회논문집
• /
• pp.191-198
• /
• 2003

Flat slab system has been adopted in many buildings constructed recently because of the advantage of reduced floor heights to meet the economical and architectural demands. Structural engineers commonly use the equivalent frame method(EFM) with equivalent beams proposed by Jacob S. Grossman in practical engineering for the analysis of flat slab structures. However, in many cases, when it is difficult to use the EFM, it is necessary to use a refined finite element model for an accurate analysis. But it would take significant amount of computational time and memory if the entire building structure were subdivided into a finer mesh. An efficient analytical method is proposed in this study to obtain accurate results in significantly reduced computational time. The proposed method employs super elements developed using the matrix condensation technique and fictitious beams are used in the development of super elements to enforce the compatibility at the interfaces of super elements. The stiffness degradation of flat slab system considered in the EFM was taken into account by reducing the elastic modulus of floor slabs in this study. Static and dynamic analyses of example structures were peformed and the efficiency and accuracy of the proposed method were verified by comparing the results with those of the refined finite element model and the EFM.

• Journal of Mechanical Science and Technology
• /
• 제15권8호
• /
• pp.1132-1142
• /
• 2001

The paper describes the construction of global function approximation models for use in design optimization via global search techniques such as genetic algorithms. Two different approximation methods referred to as evolutionary fuzzy modeling (EFM) and neuro-fuzzy modeling (NFM) are implemented in the context of global approximate optimization. EFM and NFM are based on soft computing paradigms utilizing fuzzy systems, neural networks and evolutionary computing techniques. Such approximation methods may have their promising characteristics in a case where the training data is not sufficiently provided or uncertain information may be included in design process. Fuzzy inference system is the central system for of identifying the input/output relationship in both methods. The paper introduces the general procedures including fuzzy rule generation, membership function selection and inference process for EFM and NFM, and presents their generalization capabilities in terms of a number of fuzzy rules and training data with application to a three-bar truss optimization.