• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.308-308
• /
• 2012

현재 결정질 태양전지 제작에 있어 공정 단가 및 재료비 절감을 위해 실리콘 웨이퍼의 두께가 점점 얇아지는 추세이며, 이에 따른 장파장 영역 흡수 손실을 감소시키기 위한 방안으로 후면 패시베이션에 관한 연구가 활발히 진행되고 있다. 후면 패시베이션층으로는 SiO2, SiNx, a-Si:H, SiOxNy 등의 물질이 사용되고 있으며, 본 연구에서는 SiO2/SiNx/SiO2 (ONO)의 삼중막 구조를 패시베이션층으로 하여 SiNx 단일막 구조와의 열처리 온도에 따른 소수캐리어 수명(${\tau}eff$), 후면 재결합속도(Seff), 확산거리(LD) 등의 파라미터 변화를 비교하였다. 증착 직후와 $350^{\circ}C$에서의 Forming Gas Annealing (FGA), 그리고 $800^{\circ}C$의 고온에서의 fast firing 후의 각각의 파라미터 변화를 관찰하였다. 증착 직후 SiNx 단일막과 ONO 삼중막의 소수캐리어 수명은 각각 $108{\mu}s$와 $145{\mu}s$를 보였다. 후면 재결합속도는 65 cm/s와 44 cm/s를 보였으며, 확산거리는 각각 $560{\mu}m$와 $640{\mu}m$를 나타내었다. FGA와 firing 열처리 후 세 파마미터는 모두 향상된 값을 보였으며 최종 firing 처리 후 단일막과 삼중막의 소수캐리어 수명은 각각 $196{\mu}s$와 $212{\mu}s$를 보였다. 또한 후면 재결합속도는 28 cm/s와 24 cm/s를 보였으며, 확산거리는 각각 $750{\mu}m$와 $780{\mu}m$를 보여 ONO 삼중막 구조의 경우에서 보다 우수한 특성을 보였다. 본 실험을 통해 SiNx 단일막보다 ONO 패시베이션 구조에서의 열적안정성이 우수함을 확인하였으며, 또한 ONO 패시베이션 구조는 열적 안정성뿐 아니라 n-type 도핑을 위한 Back To Back (BTB) 도핑 공정 시 후면으로 의 도펀트 침투를 막는 차단 층으로서의 역할도 기대할 수 있다.

• Journal of Korean society of Dental Hygiene
• /
• v.12 no.1
• /
• pp.1-15
• /
• 2012

Objectives : The purpose of this study was to examine the effect between job stress in jobholders and xerostomia. Methods : 250 jobholders living in Jecheon city were the subjects of this questionnaire. The questionnaire was made up of three contents and 37 items: general characteristic(13), job stress(14), degree & behavior of xerostomia(10). The data were analyzed by two-sample t-test, one-way ANOVA to examine the subjects general characteristics, job stress and degree of xerostomia and were analyzed by Chi-square test to examine the subjects general characteristics, job stress and behavior of xerostomia. Results : Only 215 jobholders were evaluated due to inadequate responses. The results were as follow. 1. As general characteristic of jobholder, male(83.7%) were more than women(16.3%), 30~39 year-old(47%) in age variable, university graduation(63.7%) in the last educational background variable, 2~3 million won(31.2%) in the month average income variable, 1~5 year(33.5%) in tour of duty variable, non-smoker(47.9%) in smoking variable were most. Married(58.6%) were more than unmarried(39.5%). Alcoholic(69.8%) were more than non-alcoholic(30.2%). 2. As classification of job stress, high strain group was 28.4%, active group was 26%, low strain group was 24.2%, passive group was 21.4%. 3. Analysis of effect between general characteristic and degree & behavior of xerostomia showed smoker were statistical significantly higher than non-smoker on 'dry eat', 'Am-sal', 'Night awake', 'Slip-liq'and 'Gumcandy'(p<0.05) and showed alcoholic were statistical significantly higher than non-alcoholic on 'Dry PM', 'Night awake, $H_2O$-bed'(p<0.05). 4. Analysis of effect between job stress and degree & behavior of xerostomia showed hight strain group were statistical significantly higher than low strain group on 'Dry PM', 'Dry-day', 'Am-sal', 'Eff-life'and 'Night awake'(p<0.05). Conclusions : As high strain group were higher than other groups on degree & behavior of xerostomia, stress would be factor that have an effect on xerostomia. Thus consider and management of stress is necessary for diagnosis and treatment of xerostomia.

• Progress in Superconductivity and Cryogenics
• /
• v.16 no.4
• /
• pp.44-48
• /
• 2014

A liquid nitrogen-cooled prepolarization ($B_p$) coil made for ultra-low field nuclear magnetic resonance and magnetic resonance imaging (ULF-MR) designed to generate 7 mT/A was fabricated. However, with suspected internal insulation failure, the coil was investigated in order to find out the source of the failure. This paper reports detailed build of the failed $B_p$ coil and a number of analysis methods utilized to figure out the source and the mode of failure. The analysis revealed that pyrolytic graphite sheet linings put on either sides of the coil for better thermal conduction acted as an electrical bridge between inner and outer layers of the coil to short out the coil whenever a moderately high voltage was applied across the coil. A simple model circuit simulation corroborated the analysis and further revealed that the failed insulation acted effectively as a damping resistor of $R_{d,eff}=6{\Omega}$ across the coil. This damping resistance produced a 50 ms-long voltage tail after the coil current was ramped down, making the coil not suitable for use in ULF-MR, which requires complete removal of magnetic field from $B_p$ coil within milliseconds.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.9
• /
• pp.838-842
• /
• 2006

0.03Pb$(Sb_{0.5}Nb_{0.5})O_{3}-0.03Pb(Mn{1/3}Nb{2/3)O_{3}-(0.94-x)PbTiO_{3}-xPbZrO_{3}$ ceramics doped with $CeO_{2}$ were synthesized by conventional bulk ceramic processing technique. Phases analysis, microstructures and piezoelectric properties were investigated as a function of $CeO_{2}$ content (0.03, 0.05, 0.1 0.3, 0.5 and 0.7 wt%). Microstructures and phases information were characterized using a scanning electron microscope (SEM) and an X-ray diffractometer (XRD). Mechanical quality factor ($Q_{m}$) and coupling factor(kp) were obtained from the resonance measurement method. Both $Q_{m}$ and $k_{p}$ were shown to reach to the maximum at 0.1 wt% $CeO_{2}$. In order to evaluate the stability of resonance frequency and effective electromechanical coupling factor ($K_{eff}$) as a function of $CeO_{2}$, the variation of resonance and anti-resonance frequency were also measured using a high voltage frequency response analyzer under various alternating electric fields from 10 V/mm to 80 V/mm. It was shown that the stability of resonance frequency and effective electromechanical coupling factor were increased with increasing the $CeO_{2}$ contents.

• Nuclear Engineering and Technology
• /
• v.51 no.8
• /
• pp.2005-2012
• /
• 2019

This work investigated the radiation attenuation characteristics of three series of tellurite glass systems with the following compositions: 30PbO-10ZnO-xTeO₂-(60-x)B₂O₃ where x = 10, 30, 40, 50 and 60 mol%, xBaO-xB₂O₃-(100-2x)TeO₂ with x = 15-40 mol% and 50ZnO-(50-x)P₂O₅-xTeO₂, where x = 0, 10, .40 mol%. The results revealed that the attenuation parameters in all the samples decrease with increase in the energy, which implied that all the samples have better interaction with gamma photons at low energies and thus higher photon attenuating efficiency. From the three systems, the samples coded as PbZnBTe60, BaBTe70 and ZnPTe40 have the lowest half value layer values and accordingly have superior photon attenuation efficacy. The maximum effective atomic number values were found for energy less than 0.1 MeV particularly near the K-edges absorption of the heavy atomic number elements such as Te, Ba and Pb. At the lowest energy, the Z_eff values are found in the range of 62.33-66.25, 49.43-50.81 and 24.99-35.83 for series 1-3 respectively. Also, we found that the density of the glass remarkably affects the photon attenuation ability of the selected glasses. The mean free path results showed that the PbO-ZnO-TeO₂-B₂O₃ glass system has better radiation shielding efficiency than the glass samples in series 2 and 3.

• Nuclear Engineering and Technology
• /
• v.14 no.4
• /
• pp.196-203
• /
• 1982

To transport the spent fuel assemblies of Korea Nuclear Unit 1, which is a Westinghouse type two loop pressurized water reactor, it has been found that steel is the most appropriate material for the design of a shipping cask in comparison with lead and depleted uranium. The proposed shipping cask will transport nine fuel assemblies at the same time and is well within the weight limit of transportation by unrestricted rail car. The cask requires 33cm thick steel shield and 27cm thick water region to satisfy the 3 feet apart dose rate limit set forth in 10 CFR 71, and 1.27cm thick steel boron fuel basket to hold the fuel elements inside the cask and control the effective multiplication factor. As a safety analysis, the fuel cladding and centerline temperatures were calculated under the accident condition of complete loss of water coolant, and it was found that the temperature was much lower than the limit of the melting point. k$_{eff}$ was calculated with fresh fuel assemblies, which was found to be well lower than 0.95. For shielding computation, the multipurpose Monte Carlo code MORSE-CG and one dimensional discrete ordinates transport code ANISN were used, and the Monte Carlo codes KENO and MORSE-CG were used for criticality calculation. The radiation source terms were calculated using ORIGEN-79.9.

• Journal of Ginseng Research
• /
• v.22 no.1
• /
• pp.51-59
• /
• 1998

In this study, rat hepatocytes known to have active glucose metabolism were obtained to investigate the hypoglycemic action of fat soluble fraction of red ginseng by using the liver perfusion technique and incubated in two different media-one containing insulin and glucagon (control group), and the other containing glucagon only The activities of main regulating enzymes, such as glucokinase, glucose 6-phosphate dehydrogenase, 6-phosphogluconate dehydrogenate, and glucose 6-phosphatase, related to metabolic pathways of glucose in these two kinds of hepatocytes were compared between these two groups and the effects of addition of fat soluble fraction ($10^1$~$10^4$%) from red ginseng to these two groups on these enzymes were also detected. The results were as follows. The specific activity of enzymes such as glucokinase, flucorse 6-phosphate dehydrogenase, and 6-phosphogluconate dehydrogenase related to glucose-consuming pathways of insulin-deficient group was much less than control one. However, their decreased activity was recovered after the addition of fat-soluble fraction at all range of concentrations. The specific activity of these enzymes after the addition of ginseng components to the control group was also increased. On the other hand, the specific activity of glucose 6-phosphatase related to glucose-producing pathway of insulin-deficient group was much higher than control one, but their increased activity was decreased obviously after the addition of fat soluble fraction at all range of concentrations. The same results were observed after the addition of fat-soluble fraction to the control group. These results suggest that the red ginseng saponin components might be effective on diabetic hyperglycemia by regulating the activity of enzymes related to glucose metabolism directly and/or indirectly. The effects of fat-soluble fraction ($10^2$%) and ginsenosides (mixture, $Rb_1$ and $Rg_1$, $10^4$%) on hypoglycemic action were compared. As a result, they showed considerable effect on hyperglycemia, but the best eff ect on the activities of glucokinase and glucose 6-phosphate dehydrogenase was appeared by ginsenoside $Rb_1$ and that of 6-phosphogluconate dehydrogenase and glucose 6-phosphatase was by ginsenoside mixture.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.1
• /
• pp.40-47
• /
• 2014

In this paper, $Al_2O_3$ film deposited by thermal atomic layer deposition (ALD) with diluted $NH_4OH$ instead of $H_2O$ was suggested for passivation layer and anti-reflection (AR) coating of the p-type crystalline Si (c-Si) solar cell application. It was confirmed that the deposition rate and refractive index of $Al_2O_3$ film was proportional to the $NH_4OH$ concentration. $Al_2O_3$ film deposited with 5 % $NH_4OH$ has the greatest negative fixed oxide charge density ($Q_f$), which can be explained by aluminum vacancies ($V_{Al}$) or oxygen interstitials ($O_i$) under O-rich condition. $Al_2O_3$ film deposited with $NH_4OH$ 5 % condition also shows lower interface trap density ($D_{it}$) distribution than those of other conditions. At $NH_4OH$ 5 % condition, moreover, $Al_2O_3$ film shows the highest excess carrier lifetime (${\tau}_{PCD}$) and the lowest surface recombination velocity ($S_{eff}$), which are linked with its passivation properties. The proposed $Al_2O_3$ film deposited with diluted $NH_4OH$ is very promising for passivation layer and AR coating of the p-type c-Si solar cell.

• Publications of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.397-399
• /
• 2015

Recently, cosmic voids have been recognized as a powerful cosmological probe. A number of studies have focused on the effects of the gravitational lensing by voids on the temperature (and in some cases polarization) anisotropy of the Cosmic Microwave Background (CMB) background at relatively large to medium scales, l ~ 1000. Many of these studies attempt to explain the unusually large cold spot in CMB temperature maps and dynamical evidence of dark energy via detections of late-time integrated Sachs Wolfe (ISW) effect. Here, the effects of lensing by voids on the CMB temperature anisotropy at small scales, up to l = 3000, will be investigated. This work is carried out in the light of the benefits of adding large catalogues of cosmic voids, to be identified by future large galaxy surveys such as EUCLID and LSST, to the analysis of CMB data such as those from Planck mission. Our numerical simulation utilizes two methods, namely, the small-de ectionangle approximation and full ray-tracing analysis. Using the fitted void density profiles and radius (RV ) distribution available in the literature from N-body simulations, we simulated the secondary temperature anisotropy (lensing) of CMB photons induced by voids along a line of sight from redshift 0 to 2. Each line of sight contains approximately 1000 voids of effective radius $RV_{,eff}=35h^{-1}Mpc$ with randomly distributed radial and projected positions. Both methods are used to generate temperature maps. The two methods will be compared for their accuracy and effciency in the implementation of theoretical modeling.

• Nuclear Engineering and Technology
• /
• v.49 no.1
• /
• pp.1-5
• /
• 2017

The heavy water zero power reactor (HWZPR), which is a critical assembly with a maximum power of 100 W, can be used in different lattice pitches. The last change of core configuration was from a lattice pitch of 18-20 cm. Based on regulations, prior to the first operation of the reactor, a new core was simulated with MCNP (Monte Carlo N-Particle)-4C and WIMS (Winfrith Improved Multigroup Scheme)-CITATON codes. To investigate the criticality of this core, the effective multiplication factor ($K_{eff}$) versus heavy water level, and the critical water level were calculated. Then, for safety considerations, the reactivity worth of $D_2O$, the reactivity worth of safety and control rods, and temperature reactivity coefficients for the fuel and the moderator, were calculated. The results show that the relevant criteria in the safety analysis report were satisfied in the new core. Therefore, with the permission of the reactor safety committee, the first criticality operation was conducted, and important physical parameters were measured experimentally. The results were compared with the corresponding values in the original core.