• Transactions on Electrical and Electronic Materials
• /
• v.12 no.1
• /
• pp.35-39
• /
• 2011

An electrically erasable programmable read-only memory (EEPROM) containing a stacked metal-insulator-metal (MIM) and n-well capacitor is proposed. It was fabricated using a 0.18 $\mu$m standard complementary metal-oxide semiconductor process. The depletion capacitance of the n-well region was effectively applied without sacrificing the cell-area and control gate coupling ratio. The device performed very similarly to the MIM capacitor cell regardless of the smaller cell area. This is attributed to the high control gate coupling ratio and capacitance. The erase speed of the proposed EEPROM was faster than that of the cell containing the MIM control gate.

• ETRI Journal
• /
• v.11 no.3
• /
• pp.96-108
• /
• 1989

다결정 실리콘 위에 열산화 방법을 통해 형성된 산화막(Polyoxide)은 기억소자에서의 capapcitor 절연막이나, EPROM(Erasable Programmable Read Only Memory)과 EEPROM(Electrically EPROM) 소자의 tunneling 산화막으로사용된다. 이러한 Polyoxide 절연막은 낮은 누설전류, 높은 절연파괴전기장, 높은 철연파괴 전류밀도 등의 특성을 가져야 한다. 본 논문에서는 공정조건 변화에 따른 Polyoxide의 특성을 조사 분석하였다.

• ETRI Journal
• /
• v.11 no.4
• /
• pp.119-127
• /
• 1989

다결정 실리콘 위에 열산화 방법을 통해 형성된 산화막(polyoxide)은 기억소자에서의 capscitor 절연막이나, EPROM(Erasable Programmable Read Only Memory)과 EEPROM(Electrically EPROM) 소자의 tunneling 산화막으로 사용된다. 이러한 polyoxide 절연막은 낮은 누설전류, 높은 절연파괴전기장, 높은 절연파괴 전류밀도등의 특성을 가져야 한다. 본 논문에서는 ployoxide의 형성조건에 따른 polyoxide의 전기적인 특성에 대하여 연구하였다.

• Journal of Sensor Science and Technology
• /
• v.21 no.1
• /
• pp.21-27
• /
• 2012

In this study, we designed an embedded system for automatic condensation control(ESCC) of the car. This system heats the car glasses as and when it is needed that makes driving safer and convenient. The system was built on an ATmega128L central processing unit(CPU), using high-performance electrically erasable programmable read-only memory(EEPROM) complex programmable logic device(CPLD) ATF1504AS, using which an ESCC algorithm has been proposed. The source code was written in C language. The algorithm of work was written using the dew-point table. This system not only clears the condensation on the glass but also averts condensation. The designed ESCC system begins working once the input information comes close to the dew-point table information. This device enables a wider field of view, thereby increasing safety.

• Transactions on Electrical and Electronic Materials
• /
• v.12 no.1
• /
• pp.16-19
• /
• 2011

The oxide-nitride-oxide (ONO) deposition process was added to the beginning of a 0.25 ${\mu}m$ embedded polysiliconoxide-nitride-oxide-silicon (SONOS) process before all of the logic well implantation processes in order to maintain the characteristics of basic CMOS(complementary metal-oxide semiconductor) logic technology. The system subsequently suffered severe ONO rupture failure. The damage was caused by the ONO implantation and was responsible for the ONO rupture failure in the embedded SONOS process. Furthermore, based on the experimental results as well as an implanted ion's energy loss model, processes primarily producing permanent displacement damages responsible for the ONO rupture failure were investigated for the embedded SONOS process.

• Journal of electromagnetic engineering and science
• /
• v.1 no.2
• /
• pp.131-138
• /
• 2001

The DTV (Digital TV) tuner for an 8-VSB (Vestigial Side-Band) modulation was developed to meet the requirements of the ATSC (Advanced Television Systems Committee). The double frequency conversion and the active tracking filter in the front-end were used to cancel interferences between adjacent channels and multi-channels by suppressing the IF beat and the Image frequency. However, It was impossible to get frequency mapping between the tracking filter and the first VCO (Voltage Controlled Oscillator) in the existing DTV tuner structure which differs from the NTSC (National Television Systems Committee) tuner. This paper, therefore, suggests an assailable structure and a new method for the automatic frequency selection by mapping the frequency characteristics over the tracking voltage and the combined HW which is composed of a Micro-controller, an EEPROM (Electrically Erasable Programmable Read Only Memory), a DAC (Digital-to-Analog Converter), an OP amplifier, and a switch driver.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.8
• /
• pp.605-610
• /
• 2010

The devices based on electrically erasable programmable read-only memory (EEPROM) structure are proposed for the detection of external electric charges. A large size charge contact window (CCW) extended from the floating gate is employed to immobilize external charges, and a control gate with stacked metal-insulator-metal (MIM) capacitor is adapted for a standard single polysilicon CMOS process. When positive voltage is applied to the capacitor of CCW of an n-channel EEPROM, the drain current increases due to the negative shift of its threshold voltage. Also when a pre-charged external capacitor is directly connected to the floating gate metal of CCW, the positive charges of the external capacitor make the drain current increase for n-channel, whereas the negative charges cause it to decrease. For an p-channel, however, the opposite behaviors are observed by the external voltage and charges. With the attachment of external charges to the CCW of EEPROM inverter, the characteristic inverter voltage behavior shifts from the reference curve dependent on external charge polarity. Therefore, we have demonstrated that the EEPROM inverter is capable of detecting external immobilized charges on the floating gate. and these devices are applicable to sensing the pH's or biomolecular reactions.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.2
• /
• pp.109-117
• /
• 2018

The experimental results are presented of an autonomous flight algorithm of a foldable quadcopter with airdrop launching functions. A foldable wing structure enabled the quadcopter to be inserted into a rocket container with limited space. The foldable quadcopter was then separated from the rocket in the air. The flight pattern was tracked using a global positioning system (GPS) with various sensors, including an inertial measurement unit (IMU) module until a designated target position was reached. Extensive field tests were conducted through an international rocket competition, ARLISS 2017, which was held in Black Rock Desert, Nevada, USA. The flight trajectory record of the experiments is stored in electrically erasable programmable read-only memory (EEPROM) embedded in the main control unit. The flight record confirmed that the quadcopter successfully separated from the rocket, executed flight toward the target for a certain length of time, and stably landed on the ground.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.4B
• /
• pp.613-623
• /
• 2000

Digital TV tuner for 8-VSB modulation was developed with satisfying the requirements of ATSC. The double frequency conversion and the active tracking filter in the front-end were used to reduce interference of the adjacent channels and multi-channels, which suppress If beat and image band. However, it was impossible to get frequency mapping between tracking filter and first VCO(Voltage Controlled Oscillator) in the double conversion digital TV tuner differing from conventional NTSC tuner. This paper, therefore, suggests the available structure and a new method for automatic frequency selection by obtaining the mapping of frequency characteristic over tracking voltage and the combined hardware which compose of Micro-controller, EEPROM, D/A(Digital-to-Analog Converter), OP amp and switch driver to solve above problems.