• Bulletin of the Korean Chemical Society
• /
• 제19권3호
• /
• pp.340-344
• /
• 1998

A facile synthesis of 4,5-(1',2'-diphenylethylenedithio)-1,3-dithiole-2-thione (dPhEDT-DTT) is carried out via a Diels-Alder type [2+4] cycloaddition reaction of 1,3-dithiol-2,4,5-trithione oligomer and t-stilbene. Molecular structure of dPhEDT-DTT is determined by x-ray crystallography: space group P1, a=11.694(3) Å, b=12.117(3) Å, c=14.688(3) Å, α=113.12(2)°, β=102.23(2)°, γ=107.02(2)°, V= 1699.1(7) Å3, Z=2. It turns out that dPhEDT-DTT crystallizes as a racemic compound consisting of (R,R) and (S,S) enantiomers. Coupling reaction of dPhEDT-DTO undergone in neat P(OEt)3 yields TTF(SEt)4 instead of ET derivative. When PR3 (R=OEt, OPh, Ph) is used in benzene, toluene or xylene, however, dPhEDT-DTO is decomposed.

• 한국방사선학회논문지
• /
• 제6권6호
• /
• pp.515-520
• /
• 2012

스트레스는 현대 사회의 가장 큰 관심 분야로서 만병의 원인이라고 여겨지고 있다. 이러한 스트레스는 뇌파에서도 특이한 영향을 미치는데 특히, 알파파의 감소가 일어난다는 점이다. 본 연구에서는 스트레스에 관하여 EDT 기법이 뇌파중 알파파에 긍정적 영향을 미치는지 알아보기 위함에 있다. 기법의 적용은, 주 2회 10분간 2주 동안 실시하며 EDT 대체의학 기법 적용이 초등학교 교사의 뇌파에 안정을 의미하는 알파파의 증가와 베타파의 감소를 보였으며, 유의한 효과는 없었으나 감마파 감소에 일부 도움이 있는 것으로 사료된다. EDT 기법이 스트레스에 있어서 관련된 뇌파인 알파파에 개선에 유의한 효과가 있으므로 스트레스 관리에 적극적 활용의 필요성을 제기한다.

• 대한기계학회논문집B
• /
• 제29권7호
• /
• pp.868-877
• /
• 2005

We performed the experimental and the numerical study on the comparison of thermal comfort performance indices for cooling loads in the lecture room for 4 cases: Fan coil unit(FCU) or 4-way cassette air-conditioner is respectively operated with the ventilation system or without. We measured the velocity, the temperature distribution and predicted mean vote(PMV) value in the lecture room for 4 different air-conditioning methods. Effective draft temperature(EDT) and PMV were investigated to analyze the characteristics of two thermal comfort indices in the lecture room and to compare their values each other. From the results we knew that there is the similarity between PMV values and EDTs when the room is air-conditioned for cooling loads. It turned out that definition of the control temperature is very important when the EDT is calculated. Finally EDT should not be used to predict the accurate thermal comfort in case that the temperature and humidity are suddenly varied and the zone affected by the solar and inner wall radiation.

• 한국정밀공학회지
• /
• 제12권5호
• /
• pp.69-76
• /
• 1995

This paper describes characteristics of EDT(Electro Discharge Texturing) and that the strip surface has influence on the paintability. The pulse mode and the capacitor mode of recently developed EDT method were investigated about the peak shape and the roughness of strip surface. And EDT method compared the above-mentioned contents with the SBT(Shot Blast Texturing) method. The peak count of the pulse mode is more than that of the capacitor mode. But the lower roughness below the Ra 3.2 .mu. m of the strip surface, the texturing time of the pulse mode is longer than the capacitor mode. In SBT method, the peak shape is similar to capacitor mode. But the EDT roll has more uniformity than the SBT roll and has more peak count than that of SBT roll. Therefore, in the painted steel sheet, EDT roll gives better surface of clarity image than the SBT roll.

• KSTLE International Journal
• /
• 제2권2호
• /
• pp.133-137
• /
• 2001

This paper investigates the correlation between strip surface roughness and the surface of the work roll. As the actual temper mill(TM) is used, this data will be adopted to another actual temper mill for the application and operation of this experiment. Conclusions are as follows: Electro-discharge texturing(EDT) roll has homogeneous roughness distribution and shape, and also a sinuous peak surface and the life is 2 times longer than that of shot blast texturing(SBT) method. And the higher surface roughness of work roll, the more time is necessary at the EDT method. In the SBT method without the correlation of roughness, but impeller rotation speed with an uncontrollable peak count. The roughness of SBT roll is irregularity compared to that of EDT roll because the work roll roughness is transferred to the strip which was temper rolled, and produces a more desirable image and greater clarity to the color painted steel sheet.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제3권3호
• /
• pp.139-144
• /
• 2003

We report the results of extensive mixed mode simulations and theoretical analysis to quantify the contribution of the edge direct tunneling (EDT) current on the total gate leakage current of 80nm NMOSFET with SiO2 gate dielectric. It is shown that EDT has a profound impact on basic analog circuit building blocks such as sample-hold (S/H) circuit and the current mirror circuit. A transistor design methodology with zero gate-source/drain overlap is proposed to mitigate the EDT effect. This results in lower voltage droop in S/H application and better current matching in current mirror application. It is demonstrated that decreasing the overlap length also improves the basic analog circuit performance metrics of the transistor. The transistor with zero gate-source/drain overlap, results in better transconductance, input resistance, output resistance, intrinsic gain and unity gain transition frequency.

• Reproductive and Developmental Biology
• /
• 제32권4호
• /
• pp.245-248
• /
• 2008

In the present studies, we have intended to compare the EDS (20% EG + 20% DMSO + 0.4 M sucrose + 10% FCS) and EDT (20% EG + 20% DMSO + 0.3 M trehalose 10% FCS) methods for vitrification of canine oocytes, in order to improve the vitrification methods. The survival rate of vitrified-thawed oocytes using the EDS method was $15.1{\pm}1.8%$ (p<0.05), which was lower than that of the control group $(66.7{\pm}2.5%)$. About $45{\sim}55%$ of the vitrified-warmed oocytes showed normal morphology, as assessed by PI staining. However, the ratio of survival rate of oocytes showed lower than that of normal morphology in comparison between EDS method and control group. The survival and developmental rates of vitrified-warmed oocytes by the EDS and EDT methods were $16.7{\pm}1.4%\;and\;11.1{\pm}0.8%$ and $8.3{\pm}1.4%\;and\;4.4{\pm}1.8%$, respectively (p<0.05). The results were significantly lower than the control group $(66.7{\pm}2.5%\;and\;16.7{\pm}3.7%)$. However, the survival rate of vitrified-warmed oocytes using EDS method showed higher than that in the ETS group.

• Journal of Information Processing Systems
• /
• 제4권4호
• /
• pp.133-144
• /
• 2008

Clusters have become a popular alternative for building high-performance parallel computing systems. Today's high-performance system area network (SAN) protocols such as VIA and IBA significantly reduce user-to-user communication latency by implementing protocol stacks outside of operating system kernel. However, emerging parallel applications require a significant improvement in communication latency. Since the time required for transferring data between host memory and network interface (NI) make up a large portion of overall communication latency, the reduction of data transfer time is crucial for achieving low-latency communication. In this paper, Eager Data Transfer (EDT) mechanism is proposed to reduce the time for data transfers between the host and network interface. The EDT employs cache coherence interface hardware to directly transfer data between the host and NI. An EDT-based network interface was modeled and simulated on the Linux-based, complete system simulation environment, Linux/SimOS. Our simulation results show that the EDT approach significantly reduces the data transfer time compared to DMA-based approaches. The EDTbased NI attains 17% to 38% reduction in user-to-user message time compared to the cache-coherent DMA-based NIs for a range of message sizes (64 bytes${\sim}$4 Kbytes) in a SAN environment.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.300-305
• /
• 2004

A preliminary study on. field emitter array cathodes was conducted aiming at applying for electrodymanic tether (EDT) propulsion systems. The EDT propulsion systems are assumed to use for active removal systems of post-mission spacecraft, which would otherwise become space debris. A survey on field emit-ter array cathode technology was conducted, and it showed that carbon nanotube (CNT) emitters are suit-able to EDT application. Trial fabrications and evaluation tests of CNT emitters were conducted, which demonstrated a target emission current density of 10 ㎃/$\textrm{cm}^2$. It was found out that the most important technical issue for developing CNT emitters is to improve the performance against voltage breakdown between the emitter and the opposite electrode.

• 한국음향학회지
• /
• 제31권3호
• /
• pp.115-128
• /
• 2012

본 연구는 확산체의 확산계수 측정결과를 바탕으로 확산체의 설치가 홀 내부 음장분포에 미치는 영향에 대하여 알아보았다. 오케스트라쉘이 설치된 600석 규모의 축소모형 홀을 측정대상으로 이용하였다. 잔향실법 흡음률 측정을 통해 1: 25 축소모형의 벽체와 객석부 재료 (관객 및 의자)가 선정되었고, 만석 시 잔향시간을 기준으로 컴퓨터 시뮬레이션과 대응되도록 제작하였다. 다양한 확산체 부착위치에 따른 물리적 음장의 변화를 측정하기 위해 반구 확산체를 측벽, 발코니전면, 천장 등 부위별로 7가지 조합을 만들어, 확산체 유/무에 따른 음향지표의 변화를 측정하였다. 사용된 음향지표는 잔향시간 (RT), 초기감쇠시간 (EDT), 명료도 (C80), 중심시간 (Ts), 음압레벨 (G)과 더불어 임펄스리스펀스의 자기상관함수 (ACF)로부터 도출되는 Temporal diffusion (TD)을 이용하였다. 실험결과, 확산체 설치에 따라 흠음력과 확산면적이 증가하였고, 이에 따라 평균 RT, 평균 EDT, 평균 G는 감소하는 경향을 보였다. 또한 확산체 설치로 인해 초기반사음의 방향전환이 활발하게 발생했고, 평균 TD은 측정 케이스에 따라 6.05에서 6.30의 값을 보였다. 확산체 설치에 가장 민감한 지표는 RT (R = 0.94)로 나타났고, TD와 EDT의 상관관계 (R = 0.73)가 높은 것으로 나타났다. 확산체 설치부위의 영향은 각 음향지표의 변화양상을 통해 논의되었다.