• Korean Journal of Chemical Engineering
• /
• v.35 no.12
• /
• pp.2379-2383
• /
• 2018

We report a facile one-pot aqueous-phase synthesis of PdAu bimetallic nanoparticles with different Pd/Au ratio. The synthesis was conducted by co-reduction of Pd and Au precursor using ascorbic acid as a reducing agent and in the presence of polyallylamine hydrochloride (PAH). By high-angle annular dark field scanning transmission electron microscopy (HAADF-STEM) and energy-dispersive X-ray spectrometry (EDS) analyses, we found that the synthesized nanoparticles had an onion-like core/shell/shell/shell structure with Au-rich core, Pd-rich shell, Au-rich shell, and Pd shell, respectively. We also investigated the catalytic performance of the synthesized PdAu nanoparticles toward hydrogen peroxide generation reaction.

• The Journal of the Convergence on Culture Technology
• /
• v.1 no.2
• /
• pp.65-69
• /
• 2015

Teeth and bones are very resistance to high temperatures and remain recognizable even after prolonged exposures to heat. The effects of heating and burning on teeth have been studied with the aim of discerning a characteristic signature withstanding high temperature, but there have been few studies about a human cremated ash, especially Korea. We are recognizable by elemental composition and can be detected in human cremated ash samples by Scanning electromicroscopy/Energy dispersive X-ray spectrometry analysis(SEM/EDS), cremated, at $800{\sim}900^{\circ}C$ for 1 hour. In this temperature range, different crystals morphologies(spherical, irregular and hexagonal) are observed in SEM. Calcium(Ca) and oxygen(O) increases steadily after cremation in EDS. We suggest that cremated bone have been provided with calcium oxide(CaO) formation at temperature above $900^{\circ}C$. This study offers basic data to assess the structure and elemental compositions of human ash and to determine if these remain identifiable after exposure to extreme temperatures.

• Transactions of the Korean hydrogen and new energy society
• /
• v.13 no.3
• /
• pp.197-203
• /
• 2002

The main emphasis of this study was to find an new hydrogen absorbing alloy such as Mg-Ti-Ni-H systems, and to investigate their hydrogenation properties. ($Mg_9Ti_x$)-10, 20wt%Ni-Hx systems were prepared by hydrogen induced mechanical alloying(HIMA) using Mg and Ni chips and sponge Ti. The particles synthesized were characterized by X-ray diffraction, and their morphologies were observed by means of scanning electron microscopy(SEM) with energy dispersive spectrometry (EDS). In addition, the crystal structures were analyzed in terms of their bright-/ dark field images and the selected area diffraction pattern(SADP) of transmission electron microscopy(TEM).

• Mycobiology
• /
• v.36 no.3
• /
• pp.143-147
• /
• 2008

We have detected the slime mold, Diachea leucopodia (GNU06-10) in a strawberry greenhouse located in Sancheong-gun, Gyeongnam. Typical fruiting bodies had developed gregariously on the strawberry leaves, petioles, and plant debris on ground soil habitat, and also surprisingly on plastic pipes and a vinyl covering. Field samples were examined via stereomicroscopy, light microscopy, and SEM for the determination of morphological characteristics. Dark-brown to black spores formed gregariously within the stipitate cylindrical sporangium, and were covered by an iridescent peridium, which may be intact at maturity, or may have disintegrated. The upper portion of the peridium generally breaks up to expose the spores, whereas the lower portion was usually persistent. The results of energy dispersive X-ray spectrometer (EDS) analysis showed that lime was present in the stalk and columella but absent from the spores, capillitium, and peridium. The above characteristics confirm its taxonomic position in the genus Diachea. However, this genus is intermediate in character between the Physarales and Stemonitales of the Myxogastromycetidae. Hence, this genus had been classified as a member of the Stemonitales until the mid-1970's, on the basis of its iridescent peridium and noncalcareous capillitial system, similar to Comatricha of the Stemonitaceae. By way of contrast, emphasis on morphological characteristics, most notably the calcareous stalk and typical columella, places Diachea within the order Physarales. The presence of a phaneroplasmodium during the trophic stage and lime deposition in its sporophores, as was confirmed in this work, supported the inclusion of Diachea in the Physarales, and the noncalcareous capillitial system verified its identification as a member of the Didymiaceae. Further characteristics of the species D. leucopodia include the following: phaneroplasmodium, spore globose 7.5 ${\mu}m$ in diameter, very minutely roughened; sporangia $500{\mu}m\times1mm$, more or less cylindrical, gregarious, stalked 1.2mm; stalk and columella white.

• Applied Chemistry for Engineering
• /
• v.28 no.3
• /
• pp.355-359
• /
• 2017

Zeolite X with Si/Al molar ratio = 1.08~1.20 was produced using a hydrothermal synthesis method. Ion-exchanged zeolite X samples were then prepared by using metal nitrate solutions containing $Mg^{2+}$ or $Cu^{2+}$. For all zeolite X samples, X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive spectrometry (EDS) were used to identify the change in crystal structure. The analysis of ammonia adsorption capability of zeolite X samples was conducted through the ammonia temperature-programmed desorption ($NH_3$-TPD) method. From XRD results, the prepared zeolite X samples maintained the Faujasite (FAU) structure regardless of cation contents in zeolite X, but the crystallinity of zeolite X containing $Mg^{2+}$ and $Cu^{2+}$ cations decreased. The distribution of cation contents in zeolite X was identified via EDS analysis. $NH_3$-TPD analysis showed that the $NH_3$ adsorption capacity of $Mg^{2+}$- and $Cu^{2+}$-zeolite X were 1.76 mmol/g and 2.35 mmol/g, respectively while the $Na^+$-zeolite X was 3.52 mmol/g ($NH_3/catalyst$). $Na^+$-zeolite X can thus be utilized as an adsorbent for the removal of ammonia in future.

• The Korean Journal of Ceramics
• /
• v.2 no.3
• /
• pp.162-166
• /
• 1996

The effects of NiO addition on the microstructure and microwave dielectric properties of ($Zr_{08}Sn_{02}$)$TiO_4$ (ZST) were investigated. With the NiO addition, a higher density of ZST ceramics than 95% of the theoretical values has been obtained in the sintering temperature range of 1400 to 150$0^{\circ}C$. Energy dispersive X-ray spectrometry (EDS) analysis of sintered specimen shows the presence of second phase at grain boundaries, which is considered to be $NiTiO_3$. Dielectric constant of the specimen is found to increase linearly with density. Q-values and TC$_r$ decrease with increasing NiO content. The variation of dielectric properties with NiO content is discussed in terms of the second phase. The ZST ceramics with 0.25 wt% NiO showed ${\varepsilon}_{\gamma}$=38, Q=7000 at GHz and TC$\gamma$=-0.5 ppm/$^{\circ}C$, comparable with the values obtained by the previous investigations.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.2
• /
• pp.322-328
• /
• 2002

In wire-electrical discharge machining (W-EDM), the dielectric plays an important role as the working fluid. It affects the material removal rate and the properties of the machined surface. This paper deals with the effects of the electrical conductivity of dielectric and cobalt percentage of sintered carbides on the machining characteristics and the machined surface integrities with deionized water as dielectric. A series of experiments have been performed on sintered carbides having different cobalt contents. Experimental results show that a higher cobalt content of WC decreases the metal removal rate and worsens the surface quality. Lower electrical conductivity of the dielectric results in a higher metal removal rate as the gap between wire electrode and workpiece reduced. Especially, the surface integrities of rough-cut workpiece, wire electrode, and debris were analyzed also through scanning electron microscopy(SEM) and surface roughness tester. By energy dispersive spectrometry(EDS), it is confirmed that micro cracks and some of electrode material are found on the workpiece surface.

• Textile Coloration and Finishing
• /
• v.23 no.2
• /
• pp.118-130
• /
• 2011

In this study, hydrophilic polyurethane (PU) was synthesized by one shot process to get good non-swelling effect and to keep high breathability using reactive silicone oil of mono terminal and bi-terminal types. We also blended non reactive silicone oil with pure hydrophilic PU to compare non-swelling effect and breathability with hydrophilic PU synthesized by the two types of reactive silicone oils. The hydrophilic films were analyzed by nuclear magnetic resonance (NMR) spectroscopy, scanning electron microscope (SEM), Fourier transform infrared (FT-IR) spectroscopy, X-ray photo electron (XPS) spectroscopy, energy dispersive spectrometry (EDS), breathability, waterproofness, tensile strength, contact angle and swelling effect. The results showed that the film made by hydrophilic PU which was synthesized with mono terminal type silicone oil provided good non-swelling effect and acceptable moisture permeability due to the modified surface properties.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.11a
• /
• pp.59-62
• /
• 1996

The effect of NiO addition on the microstructure and microwave dielectric properties of (Zr$_{0.8}$Sn$_{0.2}$)TiO$_4$(ZST) was investigated. With the NiO addition, a dense ZST body of density higher than 95% has been achieved in the sintering temperature range of 1400 to 150$0^{\circ}C$. Energy dispersive X-ray spectrometry (EDS) analysis of sintered specimen shows the presence of second phase at grain boundaries, which is considered to be NiTiO$_3$. Dielectric constant of the specimen is found to increase linearly with density. Q-values and TC$_{f}$decrease with increasing NiO content. The variation of dielectric properties with NiO content is discussed in term of the second phase. The ZST ceramics with small amount of additive gave $\varepsilon$$_{r}$=38, Q=7000 at 7 GHz and TC$_{f}$=-0.5 ppm/$^{\circ}C$, comparable with the values obtained by previous investigation.stigation.

• Journal of the Korean Society of Costume
• /
• v.58 no.9
• /
• pp.129-141
• /
• 2008

Jikgeum(woven with supplementary golden wefts) hyungbae(rank badge) of danryung(official uniform) excavated from Im Backryung'tomb($1498{\sim}1546$) of the Joseon dynasty($1392{\sim}1910$) at Goyang, Gyunggi-Do in 2007, was in a critical condition because of serious collapse of substrate in metal thread. For conservation of hyungbae, metal thread was examined by different scientific methods(Light Microscope, Scanning Electron Microscope and Energy Dispersive X-Rray Spectrometry(SEM-EDS), Fourier Transform Infrared Spectroscopy(FT-IR)). Analytical data showed that metal thread was gilt membrane strip composed of gold leaves and proteinaceous substrate which was probably parchment. To protect collapse of substrate, 1% solution of Paraloid B-72 was infilterated into substrate for consolidation of substrate and it was adhered to warp of fabric in hyungbae, before wet cleaning. After wet cleaning, the most of the gold leaves were restored, which was confirmed by both the examination with the naked eye and the microscopic examination.