• Membrane Journal
• /
• v.15 no.3
• /
• pp.213-223
• /
• 2005

We prepared an anti-adhesion membrane made of sodium hyaluronate/sodium carboxymethylcellulose (HA/CMC) and evaluated its effectiveness for adhesion prevention in a rat model. The anti-adhesion membrane was prepared by lyophilizing HA/CMC solution and cross-linking properly with 1-Ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDAC). In a cecum/abdominal wall abrasion model of Sprague-Dawley rat, cecal serosa and abdominal wall were abraded in $1\times2\;(cm^2)$ with a bone burr after peritoneal midline incision and sutured at 3 points around the injured surface. The denuded cecum was covered with HA/CMC membrane (experimental group), or nothing (control group) and apposed to the abdominal wall. Most of the control group represented 3 or more of adhesion grade at POD 7, 14, 21, and 28, whereas $60\~70\%$ of the experimental group was 2 or less of adhesion grade at 14, 21, and 28. It was similar in the adhesion strength. In a general manner, the adhesion grade and strength showed gradual increasing until POD 14, almost same or a little increasing POD 21, but decreasing POD 28. Also the control group was much higher in adhesion grade, strength, and area than the experimental group. It is expected that the anti-adhesion membrane will have a good clinical result in postoperative adhesion prevention.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.8 no.2
• /
• pp.112-116
• /
• 2003

An immunosensor based on surface plasmon resonance (SPR) onto a protein G layer by Self-assembly technique was developed for detection of Legionella pneumophila. The protein G layer by self-assembly technique was fabricated on a gold (Au) surface by adsorbing the 11-mercaptoundecanoic acid (MUA) and an activation process for the chemical binding of the free amino (-NH$_2$) of protein G and 11-(MUA) using 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide hydrochloride (EDAC) in series. The formation of the protein G layer by self-assembly technique on the Au Substrate and the binding of the antibody and antigen in series were confirmed by SPR spectroscopy. The Surface topographies of the fabricated thin films on an Au substrate were also analyzed by using an atomic force microscope (AFM). Consequently, an immunosensor for the detection of L. pneumophila using SPR was developed with a detection limit of up to 10$^2$CFU per mL.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.8 no.4
• /
• pp.227-232
• /
• 2003

A self-assembled monolayer of protein G was fabricated to develop an immunosensor based on surface plasmon resonance (SPR), thereby improving the performance of the antibodybased biosensor through immobilizing the antibody molecules (lgG). As such, 11-mercaptoundecanoic acid (11-MUA) was adsorbed on a gold (Au) support, while the non-reactive hydrophilic surface was changed through substituting the carboxylic acid group (-COOH) in the 11-MUA molecule using 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrocholide (EDAC). The formation of the self-assembled protein G layer on the Au substrate and binding of the antibody and antigen were investigated using SPR spectroscopy, while the surface topographies of the fabricated thin films were analyzed using atomic force microscopy (AFM). A fabricated monoclonal antibody (Mab) layer was applied for detecting E. coli O157:H7. As a result, a linear relationship was achieved between the pathogen concentration and the SPR angle shift, plus the detection limit was enhanced up to 10$^2$ CFU/mL.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.11 no.3
• /
• pp.215-222
• /
• 2006

The Lowry method was used in this study to measure protein in Haemophilus influenzae type b (Hib) conjugate vaccines (polyribosylibitol phosphate-tetanus toxoid; PRP-TT) using deoxycholic acid (DOC) to induce protein precipitation. Trichloroacetic acid (TCA) did not induce precipitation adequately from the Hib conjugate bulk and the freeze-dried Hib conjugate product. Its yield was approximately 50%. The matrix structure of Hib conjugate inhibits precipitation by TCA. Although the Lowry method can be carried out without precipitation in Hib conjugate bulk when no residual impurities (adipic acid dihydrazide [ADH], 1-ethyl-3-(3-dimethylamino-propyl) carbodiimide-HCI [EDAC], phenol and cyanogens bromide [CNBr], etc.) are present, it cannot be used for Hib conjugate products that contain sucrose 8.5%, because 8.5% concentration of sucrose enhanced the protein concentration. DOC- and HCl-induced precipitation is an alternative method for evaluating the protein content of the Hib conjugate bulk and the Hib conjugate product. The precipitation was optimal with a final concentrate of 0.1% for DOC at $4^{\circ}C$ and pH 2. This Lowry method, using DOC/HCI precipitation to induce protein precipitation, was confirmed a consistent, reproducible, and valid test for proteins in Hib conjugate bulk and its freeze-dried product.

• Journal of Microbiology and Biotechnology
• /
• v.12 no.5
• /
• pp.780-786
• /
• 2002

An immunosensor based on surface plasmon resonance (SPR) with a self-assembled protein G layer was developed for the detection of Escherichia coli O157:H7. A self-assembled protein C layer on a gold (Au) surface was fabricated by adsorbing the mixture of 11-mercaptoundecanoic acid (MUA) and hexanethiol at various molar ratios and by activating chemical binding between free amine (-$NH_2$) of protein G and 11-(MUA) using 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride (EDAC) in series. The formation of a self-assembled protein G layer on an Au substrate and the binding of the antibody and antigen in series were confirmed by SPR spectroscopy. The surface morphology analyses of the self-assembled protein G layer on the Au substrate, monoclonal antibody (Mab) against E. coli O157:H7 which was immobilized on protein G, and bound E. coli O157:H7 extracts on Immobilized Mab against E. coii O157:H7 were performed by atomic force microscopy (AFM). The detection limit of the SPR-based immunosensor for E. coli O157:H7 was found to be about $10^4$ cells/ml.

• Proceedings of the PSK Conference
• /
• 2003.10b
• /
• pp.100.2-101
• /
• 2003

To satisfy the increasing medical demanding especially for sever burn patients to regenerate full thickness wound cure, this study developed dermis with gelatin based scaffold and perform the biocompatibility tests. To prepare scaffold 30% of gelatin was mixed with sieved salt and dried in the mold to shape then, cross linked with a water-soluble cross-linker, EDAC. Preparing the cell for seeding from a rabbit skin, the fibroblast and keratinocyte were successfully isolated and cultured in vitro. After cell and scaffold were ready, the fibroblast was seeded to the scaffold (∼10$\^$6/ cell/cm ) for preparing dermis and keratinocyte was cultured until forming the sheet. (omitted)

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.6
• /
• pp.556-563
• /
• 2007

The current trend of low cost ultra-small satellites is to utilize Commercial Off the Shelf (COTS) parts to save cost, and accordingly, Command and Data Handling (C&DH) that operates the satellite and collects/processes the data is also designed and developed around commercial controllers. However, functionalities of commercial controllers are limited according to the specs outlined by the manufacturer. In order for the commercial controllers to be used for satellites where variety of interfaces is required, a separate interface circuit is required. Therefore, a Multi Digital Data Control System (MDDCS) using Field Programmable Gate Array (FPGA) has been developed in order to expand multiple digital interfaces that are not supported by the commercial controller, and also to compensate for SEU. This has been implemented on Actel A3P1000 using Very High Speed Integrated Circuits Hardware Description Language (VHDL).

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.4
• /
• pp.2277-2284
• /
• 2016

Ribosome-inactivating protein (RIP) from Mirabilis jalapa L. leaves has cytotoxic effects on breast cancer cell lines but is less toxic towards normal cells. However, it can easily be degraded after administration so it needs to be formulated into nanoparticles to increase its resistance to enzymatic degradation. The objectives of this study were to develop a protein extract of M. jalapa L. leaves (RIP-MJ) incorporated into nanoparticles conjugated with Anti-EpCAM antibodies, and to determine its cytotoxicity and selectivity in the T47D breast cancer cell line. RIP-MJ was extracted from red-flowered M. jalapa L. leaves. Nanoparticles were formulated based on polyelectrolyte complexation using low viscosity chitosan and alginate, then chemically conjugated with anti-EpCAM antibody using EDAC based on carbodiimide reaction. RIP-MJ nanoparticles were characterised for the particle size, polydispersity index, zeta potential, particle morphology, and entrapment efficiency. The cytotoxicity of RIP-MJ nanoparticles against T47D and Vero cells was then determined with MTT assay. The optimal formula of RIP-MJ nanoparticles was obtained at the concentration of RIP-MJ, low viscosity chitosan and alginate respectively 0.05%, 1%, and 0.4% (m/v). RIP-MJ nanoparticles are hexagonal with high entrapment efficiency of 98.6%, average size of 130.7 nm, polydispersity index of 0.380 and zeta potential +26.33 mV. The $IC_{50}$ values of both anti-EpCAM-conjugated and non-conjugated RIP-MJ nanoparticles for T47D cells (13.3 and $14.9{\mu}g/mL$) were lower than for Vero cells (27.8 and $33.6{\mu}g/mL$). The $IC_{50}$ values of conjugated and non-conjugated RIP-MJ for both cells were much lower than $IC_{50}$ values of non-formulated RIP-MJ (>$500{\mu}g/mL$).

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.4
• /
• pp.35-41
• /
• 2008

When memory devices are exposed to a space environment. they suffer various effects such as SEU(Single Event Upset). For these reasons, memory systems for space applications are generally equipped with error detection and correction(EDAC) logics against SEUs. In this paper, the error detection and correction strategy in the Mass Memory Unit(MMU) of the STSAT-3 is discussed. The probability equation of un-recoverable SEUs in the mass memory system is derived when the whole memory is encoded and decoded by the RS(10,8) Reed-Solomon code. Also the probability value is analyzed for various occurrence rates of SEUs which the STSAT-3 possibly suffers. The analyzed results can be used to determine the period of scrubbing the whole memory, which is one of the important parameters in the design of the MMU.

• Earthquakes and Structures
• /
• v.16 no.3
• /
• pp.265-277
• /
• 2019

Framed masonry wall structures represent a typical high-rise structural system that are also seismically vulnerable. During ground motions, they are excited in both in-plane and out-of-plane terms. The interaction between the frame and the infill during ground motion is a highly investigated phenomenon in the field of seismic engineering. This paper presents a numerical investigation of two distinct static out-of-plane loading methods for framed masonry wall models. The first and most common method is uniformly loaded infill. The load is generally induced by the airbag. The other method is similar to in-plane push-over method, involves loading of the frame directly, not the infill. Consequently, different openings with the same areas and various placements were examined. The numerical model is based on calibrated in-plane bare frame models and on calibrated wall models subjected to OoP bending. Both methods produced widely divergent results in terms of load bearing capabilities, failure modes, damage states etc. Summarily, uniform load on the panel causes more damage to the infill than to the frame; openings do influence structures behavior; three hinged arching action is developed; and greater resistance and deformations are obtained in comparison to the frame loading method. Loading the frame causes the infill to bear significantly greater damage than the infill; infill and openings only influence the behavior after reaching the peak load; infill does not influence initial stiffness; models with opening fail at same inter-storey drift ratio as the bare frame model.