• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.8
• /
• pp.1497-1504
• /
• 2009

This Paper Propose a method to reduce the calculation time in JPEG2000. That is, if a coefficient is estimate a upper-level subband and its descendents skip the scan process. There is a trade-off relationship between the calculation time and the image quality or the amount of output data, the calculation time and the amount of output data decreases, but the image degradation increases. The experimental results showed that in calculation time was 35% in average, which means that ls ge ses. The ein calculation time and output data can be obtls ed with a cost of an acceptlble image quality degradation.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.1
• /
• pp.163-181
• /
• 1998

In this study, the objective is determine the optimal design variable of engine mount system using the rubber mount of bush-type which is usually utilized in passive control to minimize vibrations of vehicle body or transmission from engine into body. The engine model adopted in this study is 4-cylinder, 4-stroke gasoline engine support- ed by 4-points. The system is modelled in 10 d.o.f.-rigid body motion of the engine & transmission in 6 d.o.f., elastic motion of vehicle body in 4 d.o.f.(1st torsional, 1st vertical and 1st & 2nd lateral bending vibration mode). To consider the elastic motion of vehicle body, find the eigenvalues and mode shapes of vehicle body by nodal testing and then determine the modal masses and stiffnesses of the body. The design variables of the engine mount system are locations, stiffness and damping coefficients of the rubber mounts(28 design variables). In case of considering the torque-roll axis for the engine, the design variables of the mount system are reduced to 22 design variables. The objective functions in optimal design process are considered by three cases, that is, 1) transmitted forces through engine mounts, 2) acceleration components of generalized coordinates for the vibration of vehicle body, 3) acceleration of specified location(where gear box) of body. three case are analyzed and compared with each other.

• Membrane and Water Treatment
• /
• v.7 no.4
• /
• pp.341-353
• /
• 2016

Papermaking reconstituted tobacco is an important strategy for recycling the waste tobacco residues. To indentify the influences of the inorganic components on harmful components delivery in cigarette smoke, a self-made electrodialysis stack was assembled to desalt the tobacco extract. The influences of the applied current and extract content on the removal rate of the inorganic ions were investigated. Results indicated that the applied current was a dominant impact on the desalination performance. High currents lower than the limiting current density could accelerate the desalting efficiency but cause higher energy consumption. A current of 2 A, or current density of ${\sim}11mA{\cdot}cm^{-2}$, was an optimal choice by considering both the energy consumption and desalting efficiency. A 20% tobacco extract was an appropriate content for the electrodialysis process. More than 90% of inorganic ions could be removed under the optimum condition. The preliminary result indicated that removal of inorganic components was beneficial to decrease the harmful component delivery in cigarette smoke. Naturally, ED is an environmentally friendly and high-effective technology for desalting the tobacco extract.

• Journal of Korean Library and Information Science Society
• /
• v.3
• /
• pp.51-78
• /
• 1976

Since educating all students in learning how to learn and iic\il- to adapt thernselves to the changing society is the most desirable :.:.il:ii of education in the modern world, it is necessary that the library hc:one an increasingly important part of the students' learng activities. The development of the desire and necessary skills to seek mi! to acquire lino~vledge should be encouraged and planned by the acac:e:liic library. The effective instruction in the use of academic lihra1.1.- can provide the students with the cspxbility to carry on their own icL,i.!nal education through their life. This paper is to make a brief trace of the development of liGl-ary instruction in American universities and colleges oiyer the decades, providing the overview of many successful components of saxe representative projects and experiments, from which to clarify coi~in;on problems and principles involl-ed in them. Any one of standard approaches so far identified has turned o:lt to be not a perfect method in that each has its own merits and pl-oblcms. It may be that the process of analysis and evaluation is 1-aluab!e for better comprehensive perspectives in future program of the instr~iction in the use of academic libraries. An effort is sincerely made to giie an impetus to the recogrriiivn of the importance of library instruction in Korean academic .yorid to meet the urgent needs of the modern society.

• Journal of Powder Materials
• /
• v.20 no.4
• /
• pp.285-290
• /
• 2013

$Ti_2AlN$ composites are a laminated compounds that posses unique combination of typical ceramic properties and typical metallic(Ti alloy) properties. In this paper, the powder synthesis, SPS sintering, composite characteristics and machinability evaluation were systematically conducted. The random orientation characteristics and good crystallization of the $Ti_2AlN$ phase are observed. The electrical and thermal conductivity of $Ti_2AlN$ is higher than that of Ti6242 alloy. A machining test was carried out to compare the effect of material properties on micro electrical discharge drilling for $Ti_2AlN$ composite and Ti6242 alloy. Also, mixture table as a kind of tables of orthogonal arrays was used to know how parameter is main effective at experimental design. Consequently, hybrid $Ti_2AlN$ ceramic composites showed good machining time and electrode wear shape under micro ED-drilling process. This conclusion proves the feasibility in the industrial applications.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.224-224
• /
• 2008

고주파용 집적회로 기판소재로의 응용을 위해 세라믹 특유의 취성을 개선한 $Al_2O_3$-polyimide 복합체 후막을 에어로졸데포지션법을 이용해 제조하고 그 특성을 평가하였다. 그 결과 기공이 거의 없이 치밀한 구조를 갖는 $Al_2O_3$-polyimide 복합체 후막이 구리 및 유리 기판 상에 성막 되었음이 SEM 및 EDS을 통해 확인되었다. 상용 $Al_2O_3$ 출발 파우더를 사용한 복합체 제조시 1 MHz에서 유전율은 6.7, 유전 손실률은 0.026 이었다. 유전특성의 향상을 위하여 에어로졸데포지션법으로 성막된 $Al_2O_3$-polyimide 복합체 후막의 후속 열처리 결과 유전손실율이 0.026에서 0.007로 감소하였다. 또한 집적회로 기판소재로의 응용을 위한 저온화 제조공정 확립을 위하여 $Al_2O_3$ 출발 파우더의 공정 전 열처리 후 상온에서 성막한 경우에도 어떠한 후속 열처리 없이 유전손실률이 0.007로 감소하였다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.10
• /
• pp.3293-3303
• /
• 1996

Numerical analyses have been performed to estimate the absorption heat and mass transfer coefficients in absorption process of the LiBr aqueous solution and the total heat and mass transfer rates in a vertical tube absorber which is coolING ed by air. Axisymmetric cylindrical coordinate system was adopted to model the circular tube and the transport equations were solved by the finite volume method. Absorption behaviors of heat and mass transfer were analyzed through falling film of the LiBr aqueous solution contacted by water vapor in tube. Effects of film Reynolds number on heat and mass transfer coefficients have been also investigated. Especially, effects of tube diameter have been considered to observe the total heat and mass transfer rates through falling film along the tube. Based on the analysis it has been found that the total mass transfer rate increases rapidly in a region with low film Reynolds number(10 ~ 40) as the film Reynolds number increases, while decreases beyond that region. The total heat and mass transfer rates increase with increasing the tube diameter.

• Journal of Educational Research in Mathematics
• /
• v.13 no.1
• /
• pp.25-55
• /
• 2003

In the school mathematics, the negative numbers have been instructed by means of intuitive models(concrete situation models, number line model, colour counter model), inductive-extrapolation approach, and the formal approach using the inverse operation relations. These instructions on the negative numbers have caused students to have the difficulty in understanding especially why the rules of signs hold. It is due to the fact that those models are complicated, inconsistent, and incomplete. So, students usually should memorize the sign rules. In this study we studied on the didactical phenomenology of the negative numbers as a foundational study for the improvement of teaching negative numbers. First, we analysed the formal nature of the negative numbers and the cognitive obstructions which have showed up in the historic-genetic process of them. Second, we investigated what the middle school students know about the negative numbers and their operations, which they have learned according to the current national curriculum. The results showed that the degree they understand the reasons why the sign rules hold was low Third, we instructed the middle school students about the negative number and its operations using the formal approach as Freudenthal suggest ed. And we investigated whether students understand the formal approach or not. And we analysed the validity of the new teaching method of the negative numbers. The results showed that students didn't understand the formal approach well. And finally we discussed the directions for improving the instruction of the negative numbers on the ground of these didactical phenomenological analysis.

• Korean Institute of Interior Design Journal
• /
• no.6
• /
• pp.15-20
• /
• 1995

In this paper, a strategy for utilizing the Korean tradi-tional spaces and interior design elements in inner space in order to express Korean-style interior design has been studied. Characteristics of Korean tradition was gathered from literatures in two categories; space and el-ements. Space again has been studied in detail in the area of split, continuity, hierarchy, elasticity, dynamics. And study of elements includes floor, wall, ceiling, dan-chung, lattice, laytiles on a roof, rafter, extended eaves, the line of eaves. 30 Korean restaurants were selected, analysed and compared with literature review. Based on the compari-son, a strategy for proper expression and utilization of Korean tradition is suggested. In the process of compari-son, current status of implementation and problems were found. Traditional elements are used in about 50% of Korean restaurants located in hotels, and 25% of those located in department stores. With the survey and other professional's opinions, an implementation plan is suggest-ed as follows; 1. Succession design method of tradition should use main-ly amelioration method and use copy and partly abstraction method. 2. Expression of tradition has to include all of space, ele-ments, and decoration. In space structure, Korean tra-dition space structure must be applied. 3. In order to design with feeling of Korean tradition, various different Korean elements have to be used. 4. In order to express high quality design, high-quality elements has to be used.

• Korean Chemical Engineering Research
• /
• v.43 no.1
• /
• pp.71-75
• /
• 2005

$La_{0.5}Ca_{0.5}MnO_3$ colossal magnetoresistance (CMR) powders and pellets were synthesized by sol-gel process. The structural changes were investigated by FT-IR, CP/MAS $^{13}C$ solid state NMR spectroscopy and XRD. The particle characterization, microstructure of sintered samples, and cation composition of gel powders were studied by FE-SEM/EDS, TEM and ICP-AES. The structure refinement reveals that $La_{0.5}Ca_{0.5}MnO_3$ has orthorhombic, perovskite type unit cell. The magnetic characterizations were identified through measurement of magnetic moment by VSM.