• 제목/요약/키워드: ECU control

검색결과 251건 처리시간 0.023초

Development of New-type Weight Classification System

  • Park, Byunghyuk;Hwang, Jaeho;Choi, Jaeyoung
    • 한국자동차공학회논문집
    • /
    • 제24권4호
    • /
    • pp.487-494
    • /
    • 2016
  • In order to comply with the Federal Motor Vehicle Safety Standard(FMVSS) No. 208 that has been in force since September 2003, an automatic airbag suppression system has become an essential option for detecting and protecting infants and children seated in the front passenger seat of vehicles in the U.S. market. MOBIS has developed the world's first weight-based OCS under the name NWCS. NWCS is composed of two sensors and ECU. It is sub-packaged in order to minimize the seat structure deviation. In this paper, technical features, robustness and performance of NWCS are summarized and discussed.

HILS를 이용한 바이모달 트램 조향장치 성능 평가 (Performance Evaluation of Steering System for the Bimodal Train by using HILS)

  • 문경호;장세기;목재균;김연수
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2009년도 춘계학술대회 논문집
    • /
    • pp.278-283
    • /
    • 2009
  • The bimodal tram with a pivoting joint has difficulty in making a sharp turn because of their long body and wheel base. Therefore, applying AWS(all wheel steering) to the bimodal tram is effective to reduce the turning radius. In the present study, HILS(hardware in the loop simulation) system for the AWS ECU test was developed, which consists of the components used in real vehicles. The data obtained from the HILS system also satisfied the dynamics simulation without any error on the operation control.

  • PDF

자동차용 능동 전륜 조향 제어 시스템 설계 (Development for Automotive Active Front Steering System)

  • 조영훈;제성규;윤석찬
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2008년도 하계학술대회 논문집
    • /
    • pp.280-282
    • /
    • 2008
  • 본 논문은 자동차용 능동 전륜 조향 제어 시스템을 소개한다. 능동 전륜 조향 장치는 조향의 편의성과 안정성을 위하여 조향비를 가변하거나 유사시 능동적으로 전자 제어 유닛(Electronic Control Unit : ECU)이 액추에이터를 제어해 주는 시스템이다. 최근 전자 샤시 시스템의 개발 추세인 샤시 통합 제어 관점에서 능동 전륜 조향 장치의 역할을 설정하고 성능 만족을 위한 제어기 구조에 관하여 설명한다. 설계된 제어 시스템을 3,300cc급 대형 승용차에 적용하여 그 유용성을 검증하였다.

  • PDF

HC 분사에 의한 디젤 분진 저감의 제어특성 연구 (A Study on the Control Characteristics for Reduction of Particulate Material by HC Injection)

  • 김병우;허진
    • 전기학회논문지
    • /
    • 제58권5호
    • /
    • pp.968-975
    • /
    • 2009
  • The goals of this research are to understand the regeneration characteristics in diesel particulate filter using the HC injection. This research emphasized on the development of Continuously Regenerating DOC/DPF and HC technology which was the best particulate matters removing technology of current existing technology. This experimental study has been conducted with equipped a Continuously Regenerating DOC/DPF and HC injection on displacement 2.0, 3.3 $\ell$ diesel engine and compared in terms of particulate material and emission. In this study, we could constructed 3 kinds of database according to quantity of temperature to decide the HC injection quantity and develop DOC/DPF ECU algorithm.

차량 네트워크에서의 지연 시간 절감 방법 제안 (Suggestion of a method for reducing latency in the vehicle network)

  • 김민규;김종훈;도영수;전재욱
    • 한국정보처리학회:학술대회논문집
    • /
    • 한국정보처리학회 2022년도 추계학술발표대회
    • /
    • pp.162-164
    • /
    • 2022
  • 본 논문에서는 차량 ECU(Electronic Control Unit)에서 제한된 메모리 공간의 효율적인 사용과 추가적인 프로세싱 시간(메모리 할당과 해제)을 감소시키는 방안을 제안한다. 메모리 할당을 하고 사용이 된 이후 바로 해제하는 기존의 방식 대신, 버퍼에 넣어두고 이후에 메모리 할당하는 상황이 생기면 버퍼에 넣어둔 할당된 공간을 재사용하는 방법을 사용하여 네트워크 전환 과정에서의 데이터 처리시간 차이를 비교 및 분석하고자 한다.

주변 온도환경 변화에 따른 가스 인젝터 성능 변화에 대한 연구 (A Study on Performance Change of Gas Injector with Ambient Temperature Environment)

  • 김지윤;양정직;김진호;서지원;임종완
    • 한국가스학회지
    • /
    • 제22권5호
    • /
    • pp.18-23
    • /
    • 2018
  • 본 연구에서는 CNG자동차 인젝터의 외부 환경온도에 따른 인젝터의 분사량을 분석하고자 한다. 특히 냉간 시동시와 같은 조건에서 분사량의 변화를 측정하여 저온환경이 가스인젝터 성능에 미치는 영향을 파악하고자 하며, 가스 인젝터 내부의 스프링 특성을 다르게 하여 실험을 진행 하였다. 실험 장치는 연료 공급부, 유량 측정부, 온도 챔버와 인젝터 제어부로 구성하였다. 실험결과를 통해 저온환경일수록 가스인젝터의 초기 분사량이 증가하였으며, 스프링길이 증가에 따른 니들의 열리는 시간(무효분사시간)이 지연됨을 확인하였다.

온라인 식별 및 매개변수 추정을 이용한 실시간 e-Actuator 오류 검출 (Realtime e-Actuator Fault Detection using Online Parameter Identification Method)

  • 박준기;김태호;이흥식;박찬식
    • 전기학회논문지
    • /
    • 제63권3호
    • /
    • pp.376-382
    • /
    • 2014
  • E-Actuator is an essential part of an eVGT, it receives the command from the main ECU and controls the vane. An e-Actuator failure can cause an abrupt change in engine output and it may induce an accident. Therefore, it is required to detect anomalies in the e-Actuator in real time to prevent accidents. In this paper, an e-Actuator fault detection method using on-line parameter identification is proposed. To implement on-line fault detection algorithm, many constraints are considered. The test input and sampling rate are selected considering the constraints. And new recursive system identification algorithm is proposed which reduces the memory and MCU power dramatically. The relationship between the identified parameters and real elements such as gears, spring and motor are derived. The fault detection method using the relationship is proposed. The experiments with the real broken gears show the effectiveness of the proposed algorithm. It is expected that the real time fault detection is possible and it can improve the safety of eVGT system.

자동차 네트워크 시스템을 위한 FlexRay 드라이버 개발 (The Development of FlexRay Driver for Vehicle Network System)

  • 구용제;김종철;신충엽;박상종
    • 제어로봇시스템학회논문지
    • /
    • 제16권6호
    • /
    • pp.546-552
    • /
    • 2010
  • As the demands for the safety and convenience applications of the vehicles increase, the data load for the In-vehicle Network has increased significantly. As a result, a deterministic and fault-tolerant communication system is required to implement the safety critical applications such as X-by-wire systems. FlexRay communication system is a new standard of network communication system which provides the high speed serial communication, time triggered bus and fault tolerant communication between electronic devices. In addition to time-triggered communication, as providing of the event-triggered communication such as CAN, FlexRay protocol is able to manage the restricted communication resource more effectively. This paper presents the development of FlexRay driver which will be applied to the future ECU's communication system. To develop the FlexRay driver, the FlexRay requirement specification and FlexRay specification is analyzed. The developed FlexRay driver is implemented by using MPC5567 microprocessor of the Freescale semiconductor. To verify the developed FlexRay driver, the waveform of the FlexRay driver was measured and compared with the CAN communication system. As a result, the bus load is reduced about 13% compared with the CAN communication system.

스로틀 바디가 가솔린 엔진의 출력 및 배기배출물 특성에 미치는 영향에 관한 실험적 연구 (An Experimental Study on the Performance and Emission Characteristics of SI Engine Using New Type of Throttle Body)

  • 조승완;이상석;진동규;심재준;김규보;전충환;장영준
    • 대한기계학회논문집B
    • /
    • 제32권11호
    • /
    • pp.884-890
    • /
    • 2008
  • Many researches have been carried out to reduce the emission levels and lower the fuel consumption in SI engines. Recently electronically controlled injection system is widely adapted to a passenger car to achieve these goals. Throttle body is also an important factor which influences on the emissions and engine power. In this study we redesigned a throttle body and conducted an experimental study to see the effects on engine performance and emission characteristics. We could find that idle speed control(ISC) showed stable operation characteristics as the cooling water temperature varied. And CO and HC emissions also satisfied the regulation limit.

감속도 신호에 의한 속도-제동력 고찰 (A Study on Velocity-Brake Force Resulted from Deceleration Signal)

  • 이우동
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
    • /
    • pp.616-620
    • /
    • 2003
  • Brake action is important in train operation. In case of diesel motor cas, coachs and wagon, the brake system is only act on the stop of train, but it is emphasis on safety and convenience in urban transit system such as EMU, subwar, AGT, etc. Brake of EMU has two types. one is called service brake that is used at normal operation. The other is called emergency brake. it is used at emergency operation. Service brake bring a EMU to a halt through a blending brake that form electronic brake and frictional brake. Generally EMU compose motor car and trailer car. Blending brake bring a EMU to a halt through a blending brake that form electronic brake of motor car and frictional brake of trailer car. Blending braking technology have different characteristics each nations or manufacturing companies. but deceleration command that is parameter decide blending brake. According to deceleration command, electronic brake and frictional brake are applied differently So braking power is different. electronic brake and frictional brake must be used appropriately as deceleration command. Also braking facilities must be stopped EMU more economically and safely through revision of algorism about blending brake according to output diagram. Thus The purpose of paper is to propose blending braking control way as consideration of braking output diagram used deceleration command that influence blending brake of EMU.

  • PDF