• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 춘계학술발표강연 및 논문개요집
• /
• pp.120-120
• /
• 2003

MOCVD법으로 TiN 표면에 Ru을 증착함에 있어서 Ru의 핵생성을 고양시키기 위한 ECR plasma 전처리 세정이 필요하다. 본 연구에서는 Ru 증착시 ECR $H_2O$$_2$, AE Plasma 전처리 세정 효과를 SEM, AES, XRD로 분석하였다. Ru의 핵생성은 ECR H$_2$, Ar Plasma의 노출시간이 증가할수록 향상된 반면, ECR $O_2$ plasma의 경우 노출시간이 증가할수록 핵생성 효과는 감소하였다. H$_2$ plasma 내의 H$_2$ion은 Ti와 NH$_3$를 형성하기 위해서 TiN과 반응하여 TiN을 Ti로 개질 시켰으며, Ar plasma 전처리 세정하는 동안 Ar plasma 내의 Ar ion은 TiN 또는 TiON 표면의 질소와 산소원자를 제거하는 효과를 나타내었다. 그 결과 TiN 표면상에서도 Ru의 핵생성이 쉽게 이루어졌으며 H$_2$, Ar ECR Plasma 전처리 세정에서 RU 핵생성이 향상되는 결과를 얻었다. 세 종류의 plasma중에서 Ar ECR plasma로 전처리 세정한 경우에 가장 높은 Ru 핵생성 밀도를 얻을 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.274-274
• /
• 2012

We have researched on controlling an electron temperature and a plasma collision frequency to study the effect of collisions on helicon plasmas. So, we have designed and constructed an electron cyclotron resonance (ECR) heating system in the helicon device as an auxiliary heating source. Since then, we have tried to optimize experimental designs such as a magnetic field configuration for ECR heating and 2.45GHz microwave launching system for its power transfer to the plasma effectively, and have characterized plasma parameters using a Langmuir probe. For improving an efficiency of the ECR heating with R-wave in the helicon plasma, we would understand an effect of R-wave propagation with ECR heating in the helicon plasma, because the efficiency of ECR heating with R-wave depends on some factors such as electron temperature, electron density, and magnetic field gradient. Firstly, we calculate the effect of R-wave propagation into the ECR zone in the plasma with those factors. We modify the magnetic field configuration and this system for the effective ECR heating in the plasma. Finally, after optimizing this system, the plasma parameters such as electron temperature and electron density are characterized by a RF compensated Langmuir probe.

• 한국진공학회지
• /
• 제1권1호
• /
• pp.32-36
• /
• 1992

ECR 플라즈마 장치를 설계 제작하였다. ECR 플라즈마의 흐름을 얻기 위해 자기장 의 기울기를 조작할 수 있는 전자석계가 필요하였다. 요크를 사용하면 같은 전류로 자기장 을 1.5배 더 크게 할 수 있었다. 이 장치로 만든 ECR 플라즈마의 특성을 조사하기 위하여, 랑뮈르 탐침을 이용하여 챔버의 축방향을 따라 위치에 따른 전자온도 Te와 전자밀도 Ne의 공간분포를 실험적으로 구하였다.

• 한국진공학회지
• /
• 제9권1호
• /
• pp.7-15
• /
• 2000

An ECR-PECVD system with the characteristics of high ionization rat다 ability of plasma processing in a wide pressure range and deposition at low temperature was manufactured and characterized for the deposition of thin films. The system consists of a vacuum chamber, sample stage, vacuum gauge, vacuum pump, gas injection part, vacuum sealing valve, ECR source and a control part. The control of system is carried out by the microprocessor and the ROM program. We have investigated the vacuum characteristics of ECR-PECVD system, and also have diagnosed the characteristics of ECR microwave plasma by using the Langmuir probe. From the data of system and plasma characterization, we could confirmed the stability of pressure in the vacuum chamber according to the variation of gas flow rate and the effect of ion bombardment by the negative DC self bias voltage. The plasma density was increased with the increase of gas flow rate and ECR power. On the other hand, it was decreased with the increase of horizontal radius and distance between ECR source and probe. The calculated plasma densities were in the range of 49.7\times10^{11}\sim3.7\times10^{12}\textrm{cm}^{-3}$. It is also expected that we can estimate the thickness uniformity of film fabricated by the ECR-PECVD system from the distribution of the plasma density.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.501-501
• /
• 2012

A 2.45 GHz electron cyclotron resonance (ECR) plasma source with a belt magnet assembly configuration (BMC) was developed for hyperthermal neutral beam (HNB) generation. A plasma source for high flux HNB generation should be satisfied with the requirements: low pressure operation, high density, and thin plasma. The ECR plasma source with BMC achieved high density at low operation pressure due to electron confinement enhancement caused by high mirror ratio and drifts in toroidal direction. The 2.45 GHz microwave launcher had a circularly bended WR340 waveguide with slits. The microwave E-field profile induced by the microwave launcher was studied in this paper. The E-field profile was a cups field perpendicular to B-filed at ECR zone. The optimized E-field profile and B-field were found for effective ECR heating.

• 한국재료학회지
• /
• 제14권5호
• /
• pp.363-367
• /
• 2004

Recently ZnO epitaxial layers have been widely studied as a semiconductor material for optoelectronic devices. Sapphire and silicon are commonly selected as substrate materials for ZnO epitaxial growth. In this communication, we report the effect of the ECR plasma pretreatment of sapphire and silicon substrates on the nucleation in the ZnO ALE (atomic layer epitaxy). It was found that ECR plasma pretreatment reduces the incubation period of the ZnO nucleation. Oxygen ECR plasma enhances ZnO nucleation most effectively since it increases the hydroxyl group density at the substrate surface. The nucleation enhancing effect of the oxygen ECR plasma treatment is stronger on the sapphire substrate than on the silicon substrate since the saturation density of the hydroxyl group is lower at the sapphire surface than that at the silicon surface.

• 전자공학회논문지A
• /
• 제32A권3호
• /
• pp.68-77
• /
• 1995

Characteristics of electron cyclotron resonance (ECR) plasma thermal oxide grown at low-temperature have been investigated. The effects of several process parameters such as substrate temperature, microwave power, gas flow rate, and process pressure on the growth rate of the oxide have been also investigated. It was found that the plasma density, reactive ion species, is strongly related to the growth rate of ECR plasma oxied. It was also found that the plasma density increases with microwave power while it decreases with decreasing O2 flow rate. The oxidation time dependence of the oxide thichness showed parabolic characteristics. Considering ECR plasma thermal oxidation at low-temperature, the linear as well as parabolic rate constants calculated from fitting data by using the Deal-Grove model was very large in comparison with conventional thermal oxidation. The ECR plasma oxide grown on (100) crystalline-Si wafer exhibited good electrical characteristics which are comparable to those of thermal oxide: fixed oxide charge(N$_{ff}$)= 7${\times}10^{10}cm^{-2}$, interface state density(N$_{it}$)=4${\times}10^[10}cm^{-2}eV^{-1}$, and breakdown field > 8MV/cm.

• 한국세라믹학회지
• /
• 제42권2호
• /
• pp.94-98
• /
• 2005

[ $RuO_2$ ]는 DRAM과 FRAM소자에서 고유전 capacitors의 저전극물질로서 폭넓게 연구되고 있다. 본 연구에서는 XRD, SEM, AFM 분석 등을 통하여 금속유기 화학 증착법(MOCVD)으로 $RuO_2$ 증착시 핵생성에 영향을 미치는 수소, 산소, 아르곤 ECR플라즈마 전처리 효과를 조사하였으며, 아르곤 ECR플라즈마 전처리의 경우 가장 높은 핵생성 밀도를 나타내었다. ECR 플라즈마 전처리를 통한 $RuO_2$의 핵생성 향상 메카니즘은 아르곤이나 수소 ECR 플라즈마는 TiN막 표면의 질소나 산소원자를 제거하고 따라서 TiN막 표면은 Ti-rich TiN으로 바뀌게 되는 것이다.

• 한국세라믹학회지
• /
• 제31권6호
• /
• pp.601-608
• /
• 1994

Aluminum oxide thin films were deposited on p-type(100) silicon substrates by electron cyclotron resonance plasma enhanced CVD(ECR-PECVD) using TMA[Al(CH3)3] and oxygen as reactant gases at 16$0^{\circ}C$ or lower temperatures. The aluminum oxide films deposited by ECR-PECVD have the amorphous structure with the refractive index of 1.62~1.64 and the O/Al ratio of 1.6~1.7. Oxygen flow rate necessary for the stable deposition of the aluminum oxide films increases as the deposition temperature increases. It was found from the OES analysis that the ECR plasma had les cooling effect by introducing the TMA reactant gas in comparison with the RF plasma. The properties of aluminum oxide films prepared by ECR-PECVD were compared with those prepared by RF-PECVD. The ECR-PECVD aluminum oxide films have the higher refractive indices, the lower contents of impurities (H and C) and the stronger wet etch resistance than those deposited by RF-PECVD.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
• /
• pp.163-163
• /
• 2003

TiN barrier막 위에 metal organic chemical deposition(MOCVD)법으로 RuO$_2$ 를 증착시 TiN막 표면을 세정처리하지 않을 경우 RuO$_2$의 핵생성이 어렵고, 그로 인해 RuO$_2$ 연속막이 형성되기 힘들다. 그러므로 RuO$_2$의 핵생성을 향상시키기 위해 TiN막에 대한 전처리 세정이 필수적이다. TiN막의 전처리 세정방법으로 ECR plasma 세정법을 사용하였으며, $O_2$ plasma와 H$_2$ plasma 그리고 Ai plasma를 이용해 각각의 exposure time을 변화시키며 전처리 세정을 실시하였다. H$_2$ plasma와Ar plasma의 exposure time이 증가됨에 따라 RuO$_2$의 핵생성이 향상되었다. 본 연구에서는 scanning electron microscopy(SEM), Auger electron emission spectrometry(AES), Atomic Force Microscope(AFM), X-ray diffraction (XRD) 등의 분석을 통해 TiN막 표면에 대한 ECR plasma 전처리 세정 이 RuO$_2$의 핵생성과 연속막 성장에 미치는 효과에 대해 조사하였다.