• 해양환경안전학회지
• /
• 제28권3호
• /
• pp.451-458
• /
• 2022

In Korea, five major ports have been designated as sulfur oxide emission control areas to reduce air pollutant emissions, in accordance with Article 10 of the "Special Act on Port Air Quality" and Article 32 of the "Ship Pollution Prevention Regulations". As regulations against vessel-originated air pollutants (such as PM, CO2, NOx, and SOx) have been strengthened, the Ministry of Oceans and Fisheries(MOF) enacted rules that newly built public ships should adopt eco-friendly propulsion systems. However, particularly in diesel-electric hybrid propulsion systems,the demand for precise control schemes continues to grow as the fuel saving rate significantly varies depending on the control strategy applied. The conventional Power Take In-Power Take Off(PTI - PTO) mode control adopts a rule-based strategy, but this strategy is applied only in the low-load range and PTI mode; thus, an additional method is required to determine the optimal fuel consumption point. The proposed control method is designed to optimize fuel consumption by applying the equivalent consumption minimization strategy(ECMS) to the PTI - PTO mode by considering the characteristics of the specific fuel oil consumption(SFOC) of the engine in a diesel-electric hybrid propulsion system. To apply this method, a specific fishing vessel model operating on the Korean coast was selected to simulate the load operation environment of the ship. In this study, a 10.2% reduction was achieved in the MATLAB/SimDrive and SimElectric simulation by comparing the fuel consumption and CO2 emissions of the ship to which the conventional rule-based strategy was applied and that to which the ECMS was applied.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2000년도 춘계공동학술대회 논문집
• /
• pp.625-629
• /
• 2000

The objective of ECMS(Environmentally Conscious Manufacturing Systems) is to consider environmental effects through the entire product life cycle from product development stage to design, manufacturing, supplying, using and disposing stage. Recently, environment-oriented recycling, reusing and manufacturing technologies have been researched actively in every engineering fields. In the field of chemical engineering, HHS (Health Hazard Scores) which classifies and analyzes hazardous materials in production processes has been presented. Metal cutting processes also have a lot of harmful factors, and especially hazardous components in cutting fluids have been known to have a bad effect on workers and working area. However, research works such as HHS have been little accomplished in metal cutting processes. In this research, a environmentally conscious machining process is presented by classifying hazardous components in cutting fluids, by using LCA(Life Cycle Assessments) and HHS method, and by evaluating environmental effects from cutting fluids.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2000년도 춘계학술대회
• /
• pp.225-239
• /
• 2000

The objective of ECMS(Environmentally Conscious Manufacturing Systems) is to consider environmental effects through the entire product life cycle from product development stage to design, manufacturing, supplying, using and disposing stage. Recently, environment-oriented recycling, reusing and manufacturing technologies have been researched actively in every engineering fields. In the field of chemical engineering, HHS(Health Hazard Scores) which classifies and analyzes hazardous materials in production processes has been presented. Metal cutting processes also have a lot of harmful factors, and especially hazardous components in cutting fluids have been known to have a bad effect on workers and working area. However, research works such as HHS have been little accomplished in metal cutting processes. In this research, a environmentally conscious machining process is presented by classifying hazardous components in cutting fluids, by using LCA(Life Cycle Assessments) and HHS method, and by evaluating environmental effects from cutting fluids.

• 대한안전경영과학회지
• /
• 제2권1호
• /
• pp.141-159
• /
• 2000

The objective of ECMS(Environmentally Conscious Manufacturing Systems) is to consider environmental effects through the entire product life cycle from product development stage to design, manufacturing, supplying, using and disposing stage. Recently, environment-oriented recycling, reusing and manufacturing technologies have been researched actively in every engineering fields. In the field of chemical engineering, HHS(Health Hazard Scores) which classifies and analyzes hazardous materials in production processes has been presented. Metal cutting processes also have a lot of harmful factors, and especially hazardous components in cutting fluids have been known to have a bad effect on workers and working area. However, research works such as HHS have been little accomplished in metal cutting processes. In this research, a environmentally conscious machining process is presented by classifying hazardous components in cutting fluids, by using LCA(Life Cycle Assessments) and HHS method, and by evaluating environmental effects from cutting fluids.

• 자원ㆍ환경경제연구
• /
• 제17권4호
• /
• pp.813-843
• /
• 2008

본 논문은 1997년 1월부터 2008년 7월까지의 주별 휘발유가격에 장기적 단기적 가격비대칭성이 존재하는지를 연구한다. 어떤 형태의 가격비대칭이 어느 단계에서 발생하는지 파악하기 위해 생산에서 소비에 이르는 과정을 도매단계와 소매단계로 분리해서 분석한다. TAR와 M-TAR 공적분모형과 거기에 대응하는 비대칭적 오차수정모형에 근거한 분석방법을 이용한다. 도매가격에 있어서는 원유가격 및 환율과 연관된 비대칭성이 두 형태의 오차수정모형에서 장기와 단기에 모두 발견된다. 단기적인 가격비대칭성을 설명하는데는 환율이 원유가격보다 더 중요한 역할을 하는 것으로 나타난다. '로켓과 깃털'에서 예상되는 대폭의 즉각적인 조정과는 달리 원유가격이나 환율의 상승은 도매가격의 인상 후 2주가 되어서야 통계적으로 유의한 주된 영향을 미친다. 그리고 특이하게도 비대칭적으로 원유가격이나 환율의 하락은 같은 기에 도매가격에 통계적으로 유의한 효과를 전혀 미치지 못한다. 소매가격에 있어서는 도매가격과 관련된 비대칭성이 오직 장기에서만 드러난다. 단기적으로는 대칭적으로 가격조정이 이루어진다고 할 수 있다. 도매단계에서 발견된 장기적 비대칭성과는 대조적으로 균형으로부터의 음(-)의 이탈이 양(+)의 이탈보다 장기적 균형 수준을 향해서 더 빠르게 조정되는데 이는 소비자에게는 불리한 현상으로 보인다. 국내 주별 휘발유가격 분석에서 TAR 과정 및 M-TAR 과정으로 나타낸 장기적 가격비대칭이 존재하는 것을 추정된 threshold를 이용해 확언한 것 그리고 장기 및 단기의 가격비대칭을 같은 모형에서 분석한 것은 본 연구가 처음으로 시도했다는 의미를 가진다.

• KIEAE Journal
• /
• 제16권6호
• /
• pp.5-12
• /
• 2016

Purpose: Quasi-steady state simulations have played a pivoting role to expand the user group of simulation to design engineers and architects in Korea. Initially they are introduced in the market as a building energy performance rating tool. In domestic practice, however, quasi-steady state simulations seem to be regarded as a de facto simulation only available for energy retrofit. Selection of ECMs and economic feasibility analysis are being decided through these tools, which implies that running these tools has become a norm step of the Investment-grade Audit. Method: This study aims at identifying issues and problems with the current practice via test cases, analyzing the reasons and opportunities, and then eventually suggesting proper uses of quasi-steady state and dynamic simulations. Result: The functionality of quasi-steady state simulations is more optimized to the rating. If they are to used for energy retrofits, their off-the-shelf functions also need to be expanded for customization and detailed reports. Yet their roles may be limited only to the go/no go decision; because their algorithms are still weak at precisely estimating energy and load savings that are required for making investment decisions compared to detailed simulations.

• 응용통계연구
• /
• 제32권3호
• /
• pp.405-421
• /
• 2019

얼마나 많은 에너지를 사용하느냐에 대한 예측은 사회에서 중요한 이슈이다. 특히 주거 건물은 건물의 특성상 다른 건물에 비해 예측하기 힘들다. 본 논문에서는 주거용 건물의 전력 사용량에 대한 시계열 분석의 방법들을 설명하고자 한다. 일반적으로 온도는 전력 사용량과 밀접한 관련이 있다고 알려져 있다. 변수들 사이에 공적분 관계가 존재한다면, 시간에 따른 오차를 조정하는 방법인 오차수정모형을 적용한다. 전력 사용량과 온도를 포함한 변수들 사이에 공적분 관계가 있음을 보이고, 새로운 온도 반응 함수를 정의하여 온도 효과를 고려한 오차수정모형을 적용하고자 한다.

• 한국산림과학회지
• /
• 제99권2호
• /
• pp.172-178
• /
• 2010

The status of ectomycorrhizal (ECM) fungal colonization in Pinus thunbergii seedlings was investigated 2 years after planting in an eastern coastal area of Korea. We established three $10{\times}10$ m plots at a P. thunbergii plantation in Gangneung and sampled lateral roots from 10 seedlings in each plot. ECMs were classified into morphological groups and the number of root tips of each morphotype was counted. In total, 8 ECM morphotypes were observed and fungal species that form each morphotype were identified by sequencing of the internal transcribed spacer (ITS) region of the nuclear rDNA. Suillus granulatus was the most abundant species (44.1-65.7% of relative abundance) in all plots, followed by Tomentella ellisii (14.0-37.8%) and unidentified fungus belonged to Atheliaceae (10.6-20.1%). These 3 fungal species accounted for almost all of the ECM abundance in each plot (94.9-99.8%). The remaining 5 fungal species were uncommon and rare. There was no clear difference in ECM fungal communities among plots. Community structure of ECM fungi in the young P. thunbergii plantation was simple and composed of fungal species that were also observed in mature coastal pine forests.

• Animal cells and systems
• /
• 제8권1호
• /
• pp.27-32
• /
• 2004

Endothellial cells are subjected to hemodynamic shear stress, the dragging force generated by blood flow. Shear stress regulates endothelial cell shape, structure, and function, including gene expression. Since endothelial cells must be anchored to their extracellular matrices(ECM) for their survival and growth, we hypothesized that ECMs are crucial for shear-dependent activation of extracellular signalactivated regulated kinase(ERK) that is important for cell proliferation. Shear stress-dependent activation of ERK was observed in cells plated on two different matrices, fibronectin and vitronectin(the two most physiologically relevant ECM in endothelial cells). We then treated bovine aortic endothelial cells(BAECs) with Arg-Gly-Asp(RGD) peptides that block the functional activation of integrin binding to fibronectin and vitronectin, and a nonfunctional peptide as a control. Treatment of cells with the RGD peptides, but not the control peptide, significantly inhibited ERK activity in a concentration-dependent manner. This supports the idea that integrin adhesion to the ligands, fibronectin and vitronectin, mediates shear stress-dependent activation of ERK. Subsequently, whereas antagonists of vitronectin(LM 609, an antibody for integrin ${\alpha}_{\gamma}$/${\beta}_3$ and XT 199, an antagonist specific for integrin ${\alpha}_{\gamma}$/${\beta}_3$) did not have any effect on shear-dependent activation of ERK, antagonists of fibronectin(a neutralizing antibody for integrin ${\alpha}_5$/${\beta}_1$or ${\alpha}_4$${\beta}_1$ and SM256) had an inhibitory effect. These results clearly demonstrate that mechanoactivation of ERK requires anchoring of endothelial cells to fibronectin through integrins.

• 한국시뮬레이션학회논문지
• /
• 제27권1호
• /
• pp.91-99
• /
• 2018

도메인 사용자에게 배포된 이산 사건 시스템의 시뮬레이터는 시뮬레이션 결과를 분석하는 과정에서 발생하는 요구사항의 변화로 인해 수정될 필요가 생긴다. 이로 인해 예상치 못한 개발 비용이 추가적으로 발생하고 시뮬레이션 환경의 효용성이 떨어진다. 본 논문은 이런 문제를 해결하기 위해 이벤트를 변조/삭제/생성하여 이전과 다른 결과를 발생시키는 제어 함수를 지닌 이벤트 제어 모델 템플릿을 제안한다. 이벤트 제어 모델은 이산 사건 시뮬레이션을 이산화된 상태 변화와 대응되는 이벤트의 시퀀스로 보고 실행 시간에 블랙박스 모델 외부로 발생한 이벤트를 제어하여 기존의 모델 행동을 수정한다. 더해서 이벤트 제어 모델 템플릿은 사용자가 프로그램 구현을 하지 않고 모델 행동을 수정할 수 있도록 하여 더 나은 확장성을 가지게 하며 수정에 따른 개발 비용 상승을 막는다. 본 논문은 제안하는 방법의 효용성을 보이기 위해 프로젝트 경험으로부터 가정한 사례 연구를 포함하고 있다. 이를 통해 기존의 시뮬레이터를 재사용함에 따른 이득을 확인할 수 있다.