• Transactions on Electrical and Electronic Materials
• /
• v.17 no.2
• /
• pp.109-112
• /
• 2016

We demonstrated an alternative electrically controlled birefringence liquid crystal (ECB-LC) system with ion beam (IB)-irradiated yttrium gallium oxide (YGaO) alignment films using a sol-gel process. The surface roughness of the films was dependent on the annealing temperature; aggregated particles on surface were observed at lower annealing temperatures, whereas a smooth surface could be obtained with higher annealing temperatures. Higher transmittance in the visible region was observed at higher annealing temperatures. The film had an amorphous crystallographic state irrespective of the annealing temperature. Furthermore, ECB-LC cell with our IB-irradiated YGaO film yielded faster response time when compared to ECB-LC cell with rubbed polyimide. Considering the fast response time and high transmittance, the IB-irradiated YGaO-base LC system is a powerful alternative application for the liquid crystal display industry.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.397-398
• /
• 2008

We have studied the electrically controlled birefringence (ECB) mode using reactive mesogen (RM) monomer to control pretilt angle and improve electrical characteristics. The measure of capacitance confirmed new pretilt angle by RM monomer, and Voltage Holding Ratio (VHR) was increased more than normal ECB cell.

• Proceedings of the Optical Society of Korea Conference
• /
• 2009.10a
• /
• pp.272-273
• /
• 2009

• Journal of Microbiology and Biotechnology
• /
• v.23 no.7
• /
• pp.974-983
• /
• 2013

Bacillus amyloliquefaciens CB1 was isolated from cheonggukjang, a Korean fermented soy food. B. amyloliquefaciens CB1 secretes proteases with fibrinolytic activities. A gene homologous to aprE of Bacillus subtilis, aprECB1, was cloned from B. amyloliquefaciens CB1, and DNA sequencing showed that aprECB1 can encode a prepro-type serine protease consisting of 382 amino acids. When aprECB1 was introduced into B. subtilis WB600 using an E. coli-Bacillus shuttle vector, pHY300PLK, transformants showed fibrinolytic activity and produced a 28 kDa protein, the size expected for the mature enzyme. The 28 kDa fibrinolytic enzyme was purified from the culture supernatant of B. subtilis WB600 transformant. AprECB1 was completely inhibited by phenylmethylsulfonyl fluoride and almost completely inhibited by EDTA and EGTA, indicating that it is a serine metalloprotease. AprECB1 exhibited the highest specificity for N-succinyl-Ala-Ala-Pro-Phe-p-nitroanilide, a known substrate for ${\alpha}$-chymotrypsin. $A{\alpha}$ and $B{\beta}$ chains of fibrinogen were quickly degraded by AprECB1, but the ${\gamma}$-chain was resistant.

• Journal of Bio-Environment Control
• /
• v.31 no.4
• /
• pp.409-415
• /
• 2022

Plant growth and development are also affected by root-zone environment. Therefore, it is important to consider the variables of the root-zone environment when establishing an irrigation strategy. The purpose of this study is to analyze the relationship between the volumetric moisture content (VWC), Bulk EC (ECb), and Pore EC (ECp) used by plant roots using FDR sensors in two types of rockwool media with different water transmission characteristics, using the method above this was used to establish a method for collecting and correcting available root-zone environmental data. For the experiment, two types of rockwool medium (RW1, RW2) with different physical characteristics were used. The moisture content (MC) and ECb were measured using an FDR sensor, ECp was measured after extracting the residual nutrient solution from the medium using a disposable syringe in the center of the medium at a volumetric moisture content (VWC) of 10-100%. Then, ECb and ECp are measured by supplying nutrient solution having different concentration (distilled water, 0.5-5.0) to two types of media (RW1, RW2) in each volume water content range (0 to 100%). The relationship between ECb and ECp in RW1 and RW2 media is best suited for cubic polynomial. The relationship between ECb and ECp according to volume moisture content (VWC) range showed a large error rate in the low volume moisture content (VWC) range of 10-60%. The correlation between the sensor measured value (ECb) and the ECp used by plant roots according to the volumetric water content (VWC) range was the most suitable for the Paraboloid equation in both media (RW1, RW2). The coefficient of determination the calibration equation for RW1 and RW2 media were 0.936, 0.947, respectively.

• Korean Journal of Optics and Photonics
• /
• v.20 no.1
• /
• pp.48-52
• /
• 2009

We make a simple electrically controllable linear polarization rotator over $360^{\circ}$ without loss by using a thick ECB(electrically controlled birefringence) liquid crystal cell and a quarter wave plate at 514.5 nm wavelength. Its operating principle can be analyzed and explained by using simple polarization analysis and experimental data. We demonstrate that the degree of polarization of the rotator is 0.964 and the temporal variation for 1 week lies within ${\pm}1$ degree. We can easily solve the problem of nonlinearity of the dependence of the rotational angle of linear polarization on the applied voltage by changing the utilized voltage range or its fitting curve.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.294-295
• /
• 2006

Field sequential liquid crystal display (FSLCD) has advantages such as a high transmittance due to no use of color filter and high color reproductivity because of LED backlight for a luminance source. However, to realize FSLCD response time of the LCD must be below 5ms. In this paper, we have chosen electrically controlled birefringence (ECB) mode for this application and studied film compensation to improve the operating voltage and viewing angle and to achieve a fast response time optimizing the condition of the discotic film and TAC film, operating voltage decreases to 5V, and viewing angle range is $160^{\circ}$ at horizontal and vertical direction, respectively and $120^{\circ}$ in diagonal direction. (contrast ratio > 10:1) and optimized cell exhibits a fast response time of 4ms in most grey levels.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.2
• /
• pp.333-337
• /
• 2006

Symmetric block ciper algorithm consists of a chains of operations such as permutation and substitution. There exists four kinds of operation mode, CBC, ECB, CFB, and OFB depending on the operation paradigm. Since the final ciper text is obtained through the many rounds of operations, it consumes much time. This paper proposes a pipelined design methodology which can improve the speed of crypto operations in ECB mode. Because the operations of the many rounds are concatenated in serial and executed concurrently, the overall computation time can be reduced significantly. The experimental result shows that the method can speed up the performance more than ten times.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1137-1141
• /
• 2004

In this paper, we have improved a novel ECB mode using bend structure with high tilt angle in the unique condition by Hot plate equipment. The new control of tilt angle for nematic liquid crystal (NLC) with negative and positive dielectric anisotropy on the rubbed homeotropic polyimide (PI) using baking method by Hot plate equipment was investigated. LC tilt angle decreased with increasing baking temperature and time. We suggest that the development of the novel ECB cell using control of tilt angle on the homeotropic surface is a promising technique for the achievement of fast response time and high contrast ratio.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.800-802
• /
• 2006

A simple wide-viewing-angle solution of electrically controlled birefringence (ECB) LCD is proposed, which is based on a single discotic compensation film. The use of a single discotic film instead of two leads to a considerable reduction in cost while high performance is maintained.